Descriptive and Repair Manual
Audi A3 2000
Assembly of the part
Accessibility
Figure 51 details the joint of the skull hopper with
the rest of the body.
Figure 52 shows the different accessibility zones.
ladder of the skulls.
1.-9 Points to the exhaust hopper.
2.-1 Point for reinforcing the escape hopper.
Good
accessibility
3.-2 Points to the lower reinforcement of the skull hopper.
4.-4 Points to the lower reinforcement of the skull hopper and
upper reinforcement of the exhaust hopper.
M a l a
accessibility
5.-1 Point at the lower reinforcement of the skull hopper.
6.-2 Points to the upper reinforcement of the skull hopper.
7.-3 Points to the lower reinforcement of the skull hopper.
8.-1 Pointto the upperand lowerreinforcementof the hopper.
Figure 52 Accessibility of the skull hopper
lavers.
9.-5 Points to the upper reinforcement of the skull hopper.
10.-1 Point to the hopper, drip edge, and upper reinforcementof the hopper.
Preliminary operations for replacement or repair
go of skulls.
11.-3 Points to the hopper of the boot water.
For the replacement or repair of the skull hopper of-
the following elements will be dismantled:
12.-2 Points on the side.
13.-5 Points to the upper reinforcement of the skull hopper
and I lay on my side.
•
•
Object tray (2 pressure straps and 2 guides).
Trunk floor carpet (pressure type).
Spare tire (1 screw).
Trunk lid contour rubber (pressure type).
Rear network supports (2 screws each).
Hopper exhaust valve (4 screws).
Lower the rear seat.
14.-14 Points on the side.
15.-11 Points to the lower reinforcement of the skull hopper.
•
•
•
16.-1 Point to the wheel box and trunk floor.
17.-2 Points to the trunk floor.
18.-1Sidepoint, wheelboxandconnectionreinforcement
•
between the crossbar and wheel arch.
•
19.-7 Points to the reinforcement of the escape funnel.
•
•
•
•
Fin contour joint.
20.-5 Points on the side.
Side network support (2 screws).
Rear cover of the side (1 screw).
Rear molding quarter of the side (2 connectors)
and 1 clip).
Rearframeoftheside(3staples,1screw,and4guides).
Inner wheel box carpet (pressed).
Skull (4 nuts and 1 connector).
Rear defense set.
10
11
9
8
12
7
13
14
6
•
•
•
•
•
•
•
•
•
5
15
16
4
3
17
18
19
2
Rear defense set support.
1
Lower frame of the skull (2 pegs and 6 guides).
Lower side guide of the skull (2 screws).
Side guide of the side (4 screws).
Backpressure valve (4 staples).
20
Figure 51 Union of the skull hopper
33
English 
