Telephone -> Setting up for Your Audi Rs Q8 SUV First Generation (2020-2026)

Parking and manoeuvring  
2
3
4
The red border indicates an impending obsta-  
cle.  
WARNING  
Please note the safety precautions and sys-  
tem limitations of the supporting systems,  
sensors and cameras ðpage 171 to  
ðpage 174.  
A missing border indicates an inactive area  
(partial availability).  
Activating/deactivating manoeuvre assist  
and status display:  
Risk of accident if insufficient attention is  
paid to the area around the vehicle. Only use  
your mobile device to park the vehicle if you  
are certain that there are no obstacles in the  
path of travel or underneath the vehicle, and  
that no obstacles are about to move into the  
path of travel.  
Manoeuvre assist activated. The vehicle  
has a white surround. If the sensors are on-  
ly partially available, the white surround is  
only visible in the areas being monitored.  
Manoeuvre assist temporarily deactiva-  
ted.  
(symbol greyed out): Manoeuvre assist  
unavailable.  
Note  
No symbol: The manoeuvre assist has been  
permanently deactivated in the settings.  
The parking/unparking manoeuvre is inter-  
rupted briefly if an obstacle is detected.  
Automatic braking  
Manoeuvre assist  
The vehicle can be braked automatically if a po-  
tential collision with a static object is impending.  
If the vehicle has been braked to a standstill, the  
message Manoeuvre assist: vehicle has been  
braked. Obstacle detected will appear in the in-  
strument cluster and you must take control of  
the vehicle.  
Description  
Applies to: vehicles with manoeuvre assist  
If you continue driving towards an obstacle after  
the vehicle has been stopped, the system auto-  
matically deactivates the manoeuvre assist tem-  
porarily until the next manoeuvring situation.  
Fig. 166 Upper display: Manoeuvre assist  
WARNING  
How it works  
Please note the safety precautions and system  
limitations of the supporting systems, sen-  
sors and cameras ðpage 171 to ðpage 174.  
The manoeuvre assist helps the driver when park-  
ing and manoeuvring by using sensors to monitor  
the area at the front, rear and side of the vehicle.  
In the event of an impending collision with an-  
other object, the system intervenes, within cer-  
tain system limits, and attempts to prevent a col-  
lision by braking the vehicle. The system can de-  
tect objects higher than approx. 20 cm.  
Note  
The system is only partially available if tow-  
ing mode is detected. The white frame is  
not displayed in the areas which are inac-  
tive. If the towing bracket is not factory-fit-  
ted the functions may not be deactivated  
automatically.  
Display overview  
The symbols and indicators 1 4 show the sta-  
tus and availability of the manoeuvre assist.  
If the indicator lamp flashes while the  
vehicle is in motion, the ESC is intervening  
and the manoeuvre assist is cancelled.  
1
The white border indicates availability in this  
area.  
241  
Parking and manoeuvring  
Switching off/on permanently  
The system’s functions may not be available  
if the ESC is restricted or deactivated or if a  
fault has occurred.  
You can switch the manoeuvre assist on/off in the  
Parking aid menu ðpage 175.  
The system is not available when certain  
other assist systems are switched on or the  
park assist plus is being used.  
If the manoeuvre assist is permanently deactiva-  
ted, there will no longer be a symbol in the cen-  
tre of the vehicle graphic 4 ðpage 241,  
Fig. 166.  
Activating/deactivating the manoeuvre  
assist  
WARNING  
Applies to: vehicles with manoeuvre assist  
Please note the safety precautions and system  
limitations of the supporting systems, sen-  
sors and cameras ðpage 171 to ðpage 174.  
Requirements  
The manoeuvre assist must be switched on in  
the Parking aid menu ðpage 175.  
The vehicle must not be travelling faster than  
Driver messages  
Applies to: vehicles with manoeuvre assist  
approx. 10 km/h.  
Automatic activation  
If or is displayed in the event of a fault,  
the manoeuvre assist functions are unavailable or  
restricted.  
The manoeuvre assist is activated automatically  
when the engine is running and reverse gear is  
selected.  
A driver message indicating the cause and possi-  
ble remedy may appear for some of the displays.  
The weather conditions may not be good enough,  
or a sensor may be obstructed. Clean the area in  
front of the sensors and cameras ðpage 174 and  
attempt to switch the system on again later.  
Temporary deactivation  
You can deactivate the manoeuvre assist tempo-  
rarily if you do not wish to use it during a parking  
cycle. If the manoeuvre assist has been deactiva-  
ted temporarily, it will automatically be reactiva-  
ted the next time the parking aid is activated.  
If a fault persists, drive to a qualified workshop  
soon and have it rectified.  
To deactivate the manoeuvre assist temporari-  
ly, press 4 ðpage 241, Fig. 166 on the up-  
per display. The symbol will appear.  
If you continue driving towards an obstacle after  
the vehicle has been stopped, the system auto-  
matically deactivates the manoeuvre assist tem-  
porarily until the next manoeuvring situation.  
Manual activation  
Depending on the situation, you can activate the  
manoeuvre assist in different ways:  
To activate the manoeuvre assist manually (e.g.  
when driving forwards), press the button in  
the centre console.  
If the manoeuvre assist has been temporarily  
deactivated, you can activate it again by press-  
ing 4 ðpage 241, Fig. 166 on the upper  
display. The symbol will appear.  
242