Get Controls and features -> Computer in MID Guide for BMW X5 SUV First Generation (2000-2006)

⁸⁸ⁿComputer* in MID

To avoid endangering yourself or

other road users, only make

entries when the vehicle is stationary.<

Display shows:

Speed limit

Speed limit entry:

You can enter the road speed here at

which you wish to hear and see a

reminder signal: a signal will sound,

the word LIMIT will flash, and with the

Check Control with alphanumeric dis-

play*, the speed limit warning stored in

the memory will appear on the instru-

ment cluster briefly.

Enter the limit by pressing the function

buttons.

Computer calculations begin at the

start of the journey.

Information can also be called up in the

display by the remote control, refer to

page 92.

To correct an entry:

Press the left side of the button and

repeat the entry.

The speed limit reminder is only

repeated if road speed has fallen at

least 3 mph/5 km/h below the preset

speed limit.

To store the entry:

Press the right side of the button.

Press.

Press the right side of the button.

Computer* in MID

89n

Adopting the current speed as the

speed limit:

To correct an entry:

Distance to destination

The remaining distance to the destina-

tion will be displayed on the screen.

Enter the entire distance before starting

the journey.

Press the right side of the button.

Press the left side of the button and

repeat the entry.

To enter:

To store the entry:

Press.

Press the right side of the button.

Checking stored value:

Press twice at right.

Press the left side of the button.

Deactivating the speed limit:

Press the right side of the button.

Press the left side of the button.

Press the right side of the button.

Display shows:

Press.

You can enter the distance by pressing

the function buttons.

The LIMIT display goes out, but the

stored value is not lost and can be

reactivated by pressing the LIMIT but-

ton.

⁹⁰ⁿComputer* in MID

Estimated time of arrival

Cruising range

Fuel consumption

When you have entered the distance to The distance which the vehicle should

your destination, you can obtain an esti- cover on the remaining fuel in the tank

You can have the average fuel con-

sumption displayed for two different

distances, for example a complete jour-

ney and part of the journey.

mated time of arrival display which is

continuously updated by the computer

as your average driving period varies.

is displayed.

To start the calculation, select the func-

tion with the engine running:

Press the right side of the button.

Press:

The display shows the probable range.

Press the right side of the button:

The estimated time of arrival is dis-

played.

Press the left or right side of the button:

The display will show the average fuel

consumption.

Always refuel as soon as possible

once your cruising range falls to

below 30 miles/50 kilometers, as other-

wise engine functions are not ensured

and damage can occur.<

To restart the fuel consumption calcula-

tion:

The computer will only register fuel

amounts over 1.8 gal/6 liters.

Press the left or right side of the button.

Press the right side of the button.

Computer* in MID

91n

To correct an entry:

Speed

Extended immobilizer function

You can open a display of the vehicle's You can establish a code that will pre-

average speed.

vent the engine from being started

unless the code is entered.

To start the calculation, select the func-

tion with the engine running:

Press the left side of the button and

repeat the entry.

If you do not have access to the code,

the emergency deactivation procedure

will have to be carried out, refer to next

page.

To store the entry:

Press the right side of the button.

To establish and activate the code:

Press the right side of the button.

Turn the ignition key to position 0.

Press the right side of the button.

Press:

The display shows the average speed.

Deactivating the code:

When you are asked to enter the code

with the ignition key in position 1 or 2:

To recalculate the speed:

> Enter the code at the function but-

tons.

Press the left side of the button.

Display shows:

Press the right side of the button.

Enter the code with the function but-

tons.

After the code has been entered cor-

rectly and confirmed with the SET but-

ton, the time display appears.

⁹²ⁿComputer* in MID

After three incorrect code entries, or

three attempts to start the engine with-

out a code entry, the alarm will sound

for 30 seconds on vehicles fitted with

an alarm system.

To have all the available information

displayed, press

> the button on the lever until PROG

shows on the display

> the SET button.

Deactivating the alarm in an emer-

gency:

To obtain individual items of informa-

tion, briefly press the button as often

as necessary.

If you have forgotten the code, proceed

as follows:

1. Disconnect the battery, wait approx.

2 minutes, then reconnect it. Note

that on vehicles with an alarm sys-

tem, the alarm will sound

Remote control

The computer button on the turn signal

lever can be used to select the items of

computer information which are to be

displayed.

2. Set the ignition key to position 1: the

time display will count down for the

next ten minutes

3. After ten minutes, start the engine.

To do this, press:

If the code becomes available

again in the meantime, it can be

entered during the waiting period after

pressing the CODE button.<

> the button on the lever until PROG

shows on the display

> the MID buttons in the order in which

you wish the information to be dis-

played.

Each time an entry is stored, the pro-

gram number appears on the display.

To terminate the selection procedure:

Press the right side of the button.

Controls and features -> Computer in MID for Your BMW X5 SUV First Generation (2000-2006)

Related Topics

Popular Owner Manuals

Latest Owner Manuals