Safety belts
49n
In the back, the middle safety belt
buckle is provided for use exclu-
sively by the middle passenger.
If it is not possible to extract the center
belt, this indicates that the larger back-
rest is not securely locked, refer to
page 126.<
Safety belt memory for front seat
Indicator lamp flashes or lights
up. In addition, a signal sounds
and, depending on the equip-
ment, a message* appears in the
Check Control. Please check safety
belts for correct placement.
Comply with the instructions on
page 43. Failure to do so could
result in diminished personal safety.<
Safety belt height adjustment
You can adjust the safety belts to fit
your own physical dimensions by using
the safety belt height adjustment:
The belt memory is activated when the
safety belt on the driver's side has not
yet been fastened.
The belt memory is also active from a
speed of approx. 5 mph/8 km/h when
the passenger belt has not yet been
fastened, heavy objects are placed on
the front passenger seat or passengers
sitting in the front remove their safety
belts.
For every trip, use the safety belts on all
occupied seats. Airbags complement
the safety belt as an additional safety
device, but they do not represent a sub-
stitute.
Slide the button up or down as
required.
Also observe the instructions on adjust-
ing the seats on page 43.
Closing
Make sure you hear the latch plate
engage in the belt buckle.
Unlocking
1. Press the red button in the belt
buckle
2. Hold the belt firmly
3. Guide the belt back into its reel.
English 
