Integrated universal remote control*
Telephone*
119n
1. Park your vehicle within the range of
the remote-controlled device
2. Program the integrated universal
remote control as described at the
section on fixed-code hand-held
transmitters
3. Localize the button on the receiver of
the device you want to set up, e.g. on
the upper section of the motor
4. Press the button on the receiver of
the device you want to set up. After
step 4, you have approx. 30 seconds
for step 5
Clearing memory buttons
Individual memory buttons 1 cannot be
cleared. However, you clear all three
memory buttons 1 together as follows:
Press both outer buttons 1 of the inte-
grated universal remote control for
approx. 20 seconds, maintaining pres-
sure until the indicator lamp 2 starts to
flash.
Hands-free system
5. Press the programmed memory
button 1 on the integrated universal
remote control three times.
On vehicles with telephone prepara-
tion*, the hands-free microphone is
located in the headliner.
The corresponding memory button 1 is
now programmed with the signal of the
original hand-held transmitter.
For further information on the tele-
phone, refer to the Telephone Owner's
Manual.
If you have any additional ques-
tions, please contact your BMW
Sports Activity Vehicle center.<
English 
