Get Opening and closing -> Automatic Soft Closing Guide for BMW X6 4 Door Second Generation (2015-2019)

Opening and closing

Controls

must be outside of the vehicle in the area

of the tailgate.

Closing

From the outside

Press the button on tailgate's exterior.

Interruption of the closing procedure

The closing procedure is interrupted in the fol‐

lowing situations:

From the inside

Pull and hold the button in the driver

door.

▷

If the vehicle starts off with a jerky move‐

ment.

The remote control must be located in the

car's interior for this function.

By pressing the button on the outside of

the tailgate.

By pressing the button on the inside of the

tailgate.

An acoustic signal sounds before the tailgate is

closed.

By releasing the button in the driver's door.

From inside the tailgate

Malfunction

Without Comfort Access:

Safety information

WARNING

With manual operation of a blocked tail‐

gate, it can release itself unexpectedly from

the blockage. There is a risk of injury or risk of

property damage. Do not operate the tailgate

manually if it is blocked. Have it checked by a

dealer’s service center or another qualified

service center or repair shop.◀

Press button on the inside of the tailgate.

With Comfort Access:

Manual operation

Operate the unlocked tailgate manually with a

slow and smooth motion.

To close the tailgate fully, press down lightly

only. Closing occurs automatically.

Automatic Soft Closing

Safety information

▷

Press button, arrow 1, on the inside of the

tailgate.

WARNING

Body parts can be jammed while operat‐

ing the doors. There is a risk of injury. Make

sure that the area of movement of the doors is

clear during opening and closing.◀

Press button, arrow 2.

The vehicle will be locked after closing the

tailgate. The driver's door must be closed

for this purpose and the remote control

Controls

Opening and closing

This is the case when:

Closing

Push the doors and, if applicable, the tailgate

lightly.

▷

The driver is only carrying his or her own

remote control.

The closing happens automatically.

▷

The driver unlocks the vehicle.

The driver gets into the vehicle through the

driver's door.

Personal Profile

Settings

Concept

The settings for the following systems and

functions are stored in the active profile. The

scope of storable settings depends on country

and equipment.

Via Personal Profiles, individual settings for

several drivers can be stored and called up

again when required.

▷

Unlocking and locking.

Lights.

General information

There are three driver profiles with which per‐

sonal vehicle settings can be stored. Every re‐

mote control has one of these driver profiles

assigned.

Climate control.

Radio.

Instrument cluster.

Programmable memory buttons.

Volumes, tone.

If the vehicle is unlocked using a remote con‐

trol, the assigned personal driver profile will be

activated. All settings stored in the driver pro‐

file are automatically applied.

Control Display.

Navigation.

If several drivers use their own remote control,

the vehicle will adjust the personal settings

during unlocking. These settings are also re‐

stored, if the vehicle has been used in the

meantime by a person with a different remote

control.

PDC Park Distance Control.

Rearview camera.

Side View.

Top View.

Head-up Display.

Driving Dynamics Control.

Changes to the settings are automatically

stored in the driver profile currently activated.

If another driver profile is selected via iDrive,

the settings stored in it will be applied auto‐

matically. The new driver profile is assigned to

the remote control currently used.

Driver's seat position, exterior mirror posi‐

tion, steering wheel position.

▷

Intelligent Safety.

Active Blind Spot Detection.

Night vision.

There is an additional guest profile available

that is not assigned to any remote control: it

can be used to apply settings in the vehicle

without changing the personal driver profiles.

Profile management

Opening profiles

Functional requirements

Regardless of the remote control in use, a dif‐

ferent profile may be activated. This allows you

to call up personal vehicle settings, even if you

For the system to be able to identify the driver

profile associated to a particular driver, the de‐

tected remote control must be clearly allo‐

cated to the driver.

Opening and closing -> Automatic Soft Closing for Your BMW X6 4 Door Second Generation (2015-2019)

Related Topics

Opening and closing

Popular Owner Manuals

Latest Owner Manuals