Opening and closing
Controls
The window closes while the switch is be‐
ing held.
Power windows
Safety information
▷
Pull the switch beyond the resistance
point.
WARNING
When operating the windows, body parts
and objects can be jammed. There is a risk of
injury or risk of property damage. Make sure
that the area of movement of the windows is
clear during opening and closing.◀
The window closes automatically if the
door is closed. Pulling again stops the mo‐
tion.
Closing via Comfort Access, refer to page 41.
Pinch protection system
Overview
General information
If closing force exceeds a specific threshold as
a window closes, closing is interrupted.
The window opens slightly.
Safety information
WARNING
Accessories on the windows such as an‐
tennas can impact jam protection. There is a
risk of injury. Do not install accessories in the
area of movement of the windows.◀
Power windows
Safety switch
Closing without the jam protection
system
In case of danger from the outside or if ice
might prevent normal closing, proceed as fol‐
lows:
Opening
▷
Press the switch to the resistance
point.
The window opens while the switch is be‐
ing held.
1.
2.
Pull the switch past the resistance
point and hold it there.
▷
Press the switch beyond the resist‐
ance point.
The window closes with limited jam pro‐
tection . If the closing force exceeds a spe‐
cific threshold, closing is interrupted.
The window opens automatically. Pressing
the switch again stops the motion.
Pull the switch past the resistance
point again within approx. 4 seconds and
hold it there.
Convenient opening via the remote control, re‐
fer to page 37.
The window closes without jam protec‐
tion .
Closing
▷
Pull the switch to the resistance
point.
51
English 