82nHeating and ventilation
Air distribution
You can direct the airflow onto
the windows
upper body
, toward the
and into the foot-
well . All intermediate settings are
possible. In this position , a small
volume of air is directed onto the
windows in order to keep them free of
condensation.
A "6 o'clock" position is recommended
as the normal operating setting.
Draft-free ventilation
Rapid ventilation
Temperature
You can adjust the air outlets for the
upper body area completely for your
personal comfort:
1. Set the blower speed control for the
air supply rate to position 4
2. Turn the rotary temperature control
completely to the left (blue). Then
select an interior temperature which
is pleasant for you
In order to increase the temper-
ature of the passenger compart-
ment, turn to the right (red). For
rapid heating, turn completely to the
right. Then select an interior tempera-
ture which is pleasant for you.
Use the rotary dial 2 to open and close
the vent throughout an infinitely-vari-
able range. With the levers 1, you can
direct the airflow to the side. Adjust the
airflow up or down by rotating the vent
grill.
3. Rotary control for air distribution in
position
Air supply
4. Open the outlets for the upper body
area.
You can select blower speeds
from 1 to 4. Both heating and
ventilation become more effec-
tive as the air supply rate is increased.
In position 0, the blower and the heater
are switched off.
Set the outlets so that the air flows past
you and is not directed straight at you.
English 