Controls and features -> Opening and closing from the outside for Your BMW Z3 SUV First Generation (1995-2002)

32nCentral locking system  
Opening and closing – from the outside  
Watch the closing process care-  
The concept  
fully and be sure that no one is  
trapped by the closing motion. The  
closing process stops immediately  
when you release the key.<  
The central locking system becomes  
operational when the doors are closed.  
The system simultaneously engages  
and releases the locks on the  
> doors  
> luggage compartment  
> fuel filler door.  
Manual operation  
(in the event of electrical malfunction)  
Turn the key all the way to the extreme  
left or right to unlock/lock the driver's  
door.  
The central locking system can be  
operated  
> from outside via the door locks, the  
luggage compartment lock as well as  
via the remote control*  
With the key  
Never lock the doors when leaving  
> from inside via the safety lock  
buttons (locks doors only).  
passengers in the vehicle, as they  
would then be unable to unlock the  
door from the inside.<  
The anti-theft system is automatically  
activated whenever you activate the  
central locking system from outside the  
vehicle. It prevents the doors from  
being unlocked with the lock buttons or  
release handles.  
Convenience locking mode  
The electric power windows can also  
be closed via the door locks:  
When the doors are closed, hold the  
key in the "Lock" position.  
The central locking system unlocks  
automatically in the event of an acci-  
dent. In addition, the hazard warning  
flashers and interior lamps come on.  
 
Opening and closing – from the outside  
33n  
To prevent unauthorized use of  
With the remote control*  
the remote control, surrender only  
the door and ignition key 3 or the spare  
key 2 (refer to page 30) when leaving  
the vehicle for valet parking, for  
example.  
The remote control gives you an excep-  
tionally convenient method for  
unlocking and locking your vehicle.  
Furthermore, it provides an additional  
function which you can only execute via  
the remote control:  
In the event of a system malfunction,  
please contact your BMW center. You  
can also obtain replacement keys  
there.<  
> To switch on the interior lamps, refer  
to page 34.  
With this function, you can also  
"search for" the vehicle, when parked  
in an underground garage, for  
Master key  
instance.  
Keys with remote control units are  
master keys, refer to page 30.  
Whenever you unlock (lock) the vehicle,  
you simultaneously deactivate (activate)  
the anti-theft system and switch the  
interior lamps on (off).  
Since passengers or animals  
remaining in the vehicle might be  
able to lock the doors from the inside,  
always take the vehicle keys with you  
so that the vehicle can be opened again  
from the outside at any time.<  
Every transmission is indicated by a  
light signal. If the signal no longer lights  
up when a button is pressed and  
locking with the remote control is no  
longer possible:  
Change the battery, refer to page 144.  
 
34nOpening and closing – from the outside  
To unlock  
To lock and secure  
To switch on the interior lamps  
Press button 1.  
Press button 2.  
With the vehicle locked, press button 3.  
The interior lamps are activated at the  
same time.  
Never use the remote control to  
lock the doors when leaving  
passengers in the vehicle, as they  
would then be unable to unlock the  
door from the inside.<  
 
Opening and closing – from the outside  
35n  
External systems  
For US owners only  
External systems or devices may cause The transmitter and receiver units  
local interference in the functions of the comply with part 15 of the FCC (Federal  
remote control.  
Communications Commission) regula-  
tions. Operation is governed by the  
following:  
Should this occur, you can still open  
and close the vehicle using the master  
key in either the door or luggage  
compartment locks.  
FCC ID:  
LX8EWS  
LX8FZVS  
Compliance statement:  
This device complies with part 15 of the  
FCC Rules. Operation is subject to the  
following two conditions:  
> This device may not cause harmful  
interference, and  
> this device must accept any interfer-  
ence received, including interference  
that may cause undesired operation.  
Any unauthorized modifications to  
these devices could void the  
user's authority to operate the equip-  
ment.<