30  
					Keys, Doors, and Windows  
					pedal is pressed and the vehicle is started.  
					No message will display during a remote  
					start.  
					How to Detect a Tamper Condition  
					or the door is not unlocked by pressing K  
					on the remote key during the 10-second  
					pre-alarm, the alarm will be activated.  
					If K is pressed on the remote key and the  
					horn chirps three times, an alarm occurred  
					previously while the alarm system was  
					armed.  
					.
					A message that the steering wheel must  
					be turned and the vehicle must be started  
					again indicates that the column lock  
					mechanism is bound, the column locking  
					device was unable to unlock the steering  
					column, and the vehicle did not start.  
					If this happens, immediately turn the  
					steering wheel from side to side to  
					unbind the column lock. If this does not  
					unlock the steering column, turn the  
					vehicle off and open the driver door to  
					reset the system. Then turn the vehicle  
					on and immediately turn the steering  
					wheel side to side for about 15 seconds.  
					In some cases, it may take significant  
					force to unbind the column.  
					The alarm will also be activated if a  
					passenger door or the hood is opened  
					without first disarming the system. When  
					the alarm is activated, the turn signals flash  
					and the horn sounds for about 30 seconds.  
					The alarm system will then re-arm to  
					monitor for the next unauthorized event.  
					If the alarm has been activated, a message  
					will appear on the DIC.  
					Steering Column Lock  
					If equipped, the steering column lock is a  
					theft-deterrent device. This feature locks the  
					steering column when the vehicle is turned  
					off and the driver door is opened, or when  
					the driver door is opened and then the  
					vehicle is turned off. The steering column  
					unlocks when the vehicle is turned on.  
					Disarming the Alarm System  
					To disarm the alarm system or turn off the  
					alarm if it has been activated:  
					.
					.
					Press K on the remote key.  
					Start the vehicle.  
					To avoid setting off the alarm by mistake:  
					The Driver Information Center (DIC) may  
					display one of these messages:  
					.
					Lock the vehicle after all occupants have  
					To keep the steering column from binding,  
					straighten the front wheels before turning  
					off the vehicle.  
					exited.  
					.
					A message to service the steering column  
					lock indicates that an issue has been  
					detected with the column lock feature  
					and the vehicle should be serviced.  
					.
					Always unlock a door with the  
					remote key.  
					Unlocking the driver door with the key  
					will not disarm the system or turn off the  
					alarm.  
					Immobilizer  
					See Radio Frequency Statement 0 438.  
					.
					A message that the steering column is  
					locked indicates that the engine is  
					running, but the steering column is still  
					locked. It is normal for the column to be  
					locked during a remote start, but the  
					column should unlock after the brake