Driving
Starting - switching off the engine with the key
Ignition switch
Starting using the key
Never leave the engine running in
an enclosed area without adequate
ventilation: internal combustion
For vehicle fitted with a manual gearbox:
F
F
F
Insert the key in the ignition switch.
Turn the key to position 2.
Unlock the steering column, by turning the
wheel slightly.
engines emit toxic exhaust gases,
such as carbon monoxide. Danger of
intoxication and death. In very severe
winter conditions (temperatures
below -23°C), it is necessary to allow
the engine to run for 4 minutes before
setting off, in order to ensure the
correct operation and durability of
the mechanical components of your
vehicle, the engine and gearbox.
F
F
F
Fully depress the clutch pedal.
Put the gear lever into neutral.
Operate the starter by turning the key to
position 4 (START).
4
F
Once the engine is running, release
the key.
The key returns automatically to position 3
(ON).
1. "LOCK" position.
The steering column is unlocked.
2. "ACC" position.
For vehicles fitted with an ETG gearbox:
F
F
F
Insert the key in the ignition switch.
Turn the key to position 2.
Unlock the steering column, by turning the
wheel slightly.
The ancillaries (audio system,
12V socket...) can be used.
3. "ON" position
Ignition on.
F
F
F
Press and hold the brake pedal.
Put the gear selector into position N.
Operate the starter by turning the key to
position 4 (START).
4. "START" position.
Engine starting.
If you use the ancillaries for a prolonged
period (key in position 2 or 3), you risk
discharging the battery. Starting your
vehicle will then no longer be possible.
Be aware.
F
Once the engine is running, release
the key.
The key returns automatically to position 3
(ON).
71
English 