Advertisement

Advertisement

Driving -> Starting - switching off the engine with the Keyless Entry and Starting system for Your Citroen C1 4 Door Second Generation (2014-2022)

Driving  
Starting - switching off the engine  
with the Keyless Entry and Starting  
system  
Changing the mode of the  
vehicle  
Switching off  
F
F
Immobilise the vehicle.  
With a manual gearbox: put the gear lever  
into neutral.  
F
With an ETG gearbox: place the selector at  
If you use the ancillaries for a prolonged  
position N.  
period, the vehicle will automatically  
switch to "OFF" mode after about  
20 minutes.  
Be aware in order to avoid discharging  
the battery.  
F
F
F
F
Turn the key towards you to position 2 (ACC).  
Press in and turn the key to position 1 (LOCK).  
Remove the key from the ignition switch.  
Turn the steering until the steering column  
locks.  
Avoid attaching heavy objects to the  
key, which would weigh down on its  
blade in the ignition switch and could  
cause a malfunction.  
With the electronic key inside the  
vehicle; each press on the "START/  
STOP" button, with no action on the  
pedals, changes the vehicle's mode:  
F
First press ("ACC" mode).  
The ancillaries (radio, 12V socket...) can be  
used.  
F
F
Second press ("ON" mode).  
Ignition on.  
Third press ("OFF" mode).  
72  
Driving  
Starting using the  
electronic key  
For vehicles fitted with an ETG gearbox:  
If one of the starting conditions is  
not met, the "Keyless Entry and  
F
With the electronic key inside the vehicle,  
put the gear selector at N and press the  
brake pedal.  
Starting" system indicator lamp flashes  
in the instrument panel. In some  
circumstances, it is necessary to  
turn the steering wheel slightly while  
pressing the "START/STOP" button to  
assist unlocking of the steering.  
4
This indicator lamp comes on in the  
instrument panel.  
F
Press and release the "START/  
STOP" button.  
The presence of the electronic key in  
the vehicle is essential for switching  
on the ignition and starting only. Once  
the engine has started, make sure that  
the electronic key remains with the  
vehicle until the end of the journey:  
otherwise you would not be able to lock  
the vehicle.  
With the first press on the "START/  
STOP" button, this indicator lamp  
flashes slowly in the instrument panel.  
Depending on the ambient temperature,  
each attempt at starting can take up to  
around 30 seconds. During this period,  
do not press the "START/STOP" button  
again, or release the clutch pedal or  
brake pedal (depending on the type of  
gearbox).  
For vehicles fitted with a manual gearbox:  
F
With the electronic key inside the vehicle,  
put the gear lever into neutral and fully  
depress the clutch pedal.  
After this period, if the engine has not  
started, press the "START/STOP"  
button again for another attempt at  
starting.  
This indicator lamp comes on in the  
instrument panel.  
F
Press and release the "START/  
STOP" button.  
73  
Driving  
Switching off using the  
electronic key  
Emergency starting  
F
Immobilise the vehicle.  
F
Put the corner of the electronic key, where  
the indicator lamp is located, in contact  
with the "START/STOP" button.  
There is an audible signal when the  
electronic key is recognised; the vehicle  
changes to "ON" mode.  
With a manual gearbox: press the clutch  
pedal fully down.  
With an ETG gearbox: press the brake  
pedal.  
Check that the "Keyless Entry and  
Starting" indicator lamp comes on in green  
in the instrument panel.  
Press the "START/STOP" button.  
The engine starts.  
F
With a manual gearbox: put the gear lever  
into neutral.  
F
With an ETG gearbox: place the gear  
selector at N.  
F
With the electronic key inside  
the vehicle, press the "START/  
STOP" button.  
F
F
F
The engine stops.  
The steering locks when a door is opened or on  
locking the vehicle.  
When the electronic key is in the  
recognition zone and your vehicle  
does not start after pressing the  
"START/STOP" button, this warning  
lamp flashes in the instrument panel.  
F
If the vehicle is not immobilised, the  
engine will not stop.  
If the engine does not start, contact a  
CITROËN dealer or a qualified workshop.  
F
F
With a manual gearbox: put the gear lever  
into neutral.  
There is an audible signal when the driver's door  
is opened and the vehicle is in "ACC" mode.  
With an ETG gearbox: place the selector  
lever at N.  
F
Press the "START/STOP" button  
again to change to "OFF" mode.  
74  
Driving  
Electronic engine  
immobiliser  
This locks the engine management system as  
soon as the ignition has been switched off and  
therefore prevents starting of the vehicle by  
anyone who does not have the key.  
The ignition key has an electronic chip which  
has a special code. When the ignition is  
switched on, the code must be recognised for  
starting to be possible.  
Emergency switch-off  
In the event of an emergency only, the engine  
can be switched of without conditions. To do  
this, press for more than 2 seconds, or make  
a minimum of 3 successive presses on the  
"START/STOP" button.  
4
In this case the steering column locks as soon  
as the vehicle stops.  
In the event of a malfunction, your vehicle will  
not start.  
Contact a CITROËN dealer or a qualified  
workshop.  
Electronic key not  
recognised  
If the electronic key is no longer in the  
recognition zone when driving or when you  
(later) request switching off the engine, there is  
an audible signal to warn you.  
Do not make any modifications to the  
electronic immobiliser system.  
F
Press for more than 2 seconds,  
or make a minimum of  
3 successive presses on the  
"START/STOP" button if you  
want to force switching off of the  
engine (note that restarting  
will not be possible without  
the key).  
75