Advertisement

Advertisement

Driving -> Stop Start (VTi 68 S-S engine) for Your Citroen C1 4 Door Second Generation (2014-2022)

Driving  
Stop & Start (VTi 68 S&S engine)  
The Stop & Start system puts the engine  
temporarily into standby - STOP mode - during  
Operation  
Going into engine STOP  
stops in the traffic (red lights, traffic jams, or  
other...). The engine restarts automatically -  
START mode - as soon as you want to move  
off. The restart takes place instantly, quickly  
and silently.  
Perfect for urban use, the Stop & Start system  
reduces fuel consumption and exhaust  
emissions as well as the noise level when  
stationary.  
For smoother operation, during  
mode  
parking manoeuvres STOP mode is  
not available for a few seconds after  
coming out of reverse gear.  
The Stop & Start does not affect the  
vehicle's systems, such as for example,  
braking, power steering...  
This indicator lamp comes on in the  
instrument panel and the engine  
goes into standby automatically:  
-
when stationary, in neutral, and you  
release the clutch pedal.  
4
Stop & Start time counters  
A partial time counter counts the periods in  
STOP mode during a journey.  
It is displayed in the trip computer once the  
Stop & Start is operating.  
Never refuel with the engine in  
STOP mode; you must switch off the  
ignition with the button.  
Press one of the "DISP" buttons to return to the  
previous display.  
A global time counter counts the periods in  
STOP mode since the last reset.  
When it is displayed, press one of the  
"DISP" buttons to reset the counter.  
83  
Driving  
Operating fault  
Going into engine START  
mode  
Special cases: STOP mode not  
available  
In the event of a fault with the system,  
this warning lamp flashes in the  
instrument panel.  
STOP mode is not invoked principally when:  
This indicator lamp goes off and the  
engine starts automatically:  
-
-
-
the driver's door is open,  
the driver's seat belt is not fastened,  
the engine is needed to maintain a  
comfortable temperature in the passenger  
compartment,  
Have it checked by a CITROËN dealer or a  
qualified workshop.  
-
when you fully depress the clutch pedal.  
-
-
demisting is active,  
some special conditions (battery charge,  
engine temperature, braking assistance,  
vehicle stopped on a steep gradient, high  
altitude...) where the engine is needed to  
assure control of a system.  
Special cases: START invoked  
automatically  
START mode is invoked automatically when:  
-
-
-
-
you open the driver's door,  
you open the bonnet,  
you unfasten the driver's seat belt,  
some special conditions (battery charge,  
engine temperature, braking assistance,  
descending a steep gradient, adjustment of  
the air conditioning...) where the engine is  
needed for control of a system.  
84  
Driving  
Maintenance  
Manual deactivation /  
reactivation  
Before doing anything under the  
bonnet, deactivate the Stop & Start  
system to avoid any risk of injury  
resulting from automatic operation of  
START mode.  
4
At any time, press this button to deactivate the  
system.  
The Stop & Start system requires a 12 V  
battery of a special specification and  
technology.  
All work on this type of battery must be  
done only by a CITROËN dealer or a  
qualified workshop.  
Deactivation is confirmed by the  
illumination of this indicator lamp in  
the instrument panel.  
If the system has been deactivated in  
STOP mode, the engine restarts immediately.  
For more information on the 12 V  
battery, refer to the corresponding  
section.  
Press this button again.  
The system is active again; this is confirmed by the  
indicator lamp going off in the instrument panel.  
The system is reactivated automatically at  
every new engine start by the driver.  
85