Practical information
The locations of the following components may
vary:
– Air filter.
– Engine oil dipstick.
– Engine oil filler cap.
Electric engine
7
Petrol engine
►ꢀ Lift the exterior safety catch and raise the
bonnet.
►ꢀ Unclip the stay from its housing and place it
in the support slot to hold the bonnet open.
1. Screenwash fluid reservoir
2. Engine coolant reservoir (level only)
3. Brake fluid reservoir
4. Battery/Fuses
Closing
5. Fusebox
6. 400 V electrical circuit
7. Emergency circuit-breaker for emergency
1. Screenwash fluid reservoir
2. Engine coolant reservoir
3. Brake fluid reservoir
4. Battery/Fuses
5. Fusebox
6. Air filter
►ꢀ Hold the bonnet and pull out the stay from
the support slot.
►ꢀ Clip the stay in its housing.
►ꢀ Lower the bonnet and release it near the
end of its travel.
►ꢀ Pull on the bonnet to check that it is locked
correctly.
services and maintenance technicians
For more information on the Charging system
(Electric), refer to the corresponding section.
7. Engine oil filler cap
8. Engine oil dipstick
Checking levels
Because of the presence of electrical
equipment under the bonnet, it is
strongly recommended that exposure to
water (rain, washing, etc.) be limited.
Check all of the following levels regularly in
accordance with the Manufacturer's service
schedule. Top them up if required, unless
otherwise indicated.
If a level drops significantly, have the
corresponding system checked by a CITROËN
dealer or a qualified workshop.
Engine compartment
The engine shown here is an example for
illustrative purposes only.
137
English 