SIGNALLING
LIGHTING CONTROL STALK
AUTOMATIC LIGHTING OF
HEADLAMPS
GUIDE-ME-HOME LIGHTING
This function switches on your
headlamps, to light your way when
you wish to walk from a carpark,
for example.
Sidelamps and dipped beams
come on automatically in poor
ambient light, or if the wipers are in
continuous operation. They go out
as soon as the ambient light again
become sufficient or when the wip-
ers cease to operate.
II
This function is activated:
Manually by pulling the con-
trol A towards you, with the
ignition switched off.
A
Activation/deactivation of this func-
tion is possible in the menu "Per-
sonalisation/Configuration" in the
"Main menu".
Automatically, provided:
The automatic lighting of
headlamps is activated.
To activate the guide-me-
home lighting function, select
in the "Main menu", then
in "Personalisation/Con-
figuration", the sub-menu for
lighting and signalling, then
activate the function.
Note: Activation of this function
is immediate while deactivation
requires the ignition to be switched
off.
All vehicle lamps off
In fog or snow, the light sensor
may detect enough light. The
lights will therefore not come on
automatically.
Take care not to cover the bright-
nesssensor,whichisvisiblefrom
outside the windscreen, behind
the interior rear view mirror.
See "Multifunction displays".
Rotate the ring A forwards.
Note: It is possible to modify the dura-
tion of the guide-me-home lighting
(approx. 60, 30 or 15 seconds) in the
menu "Personalisation/Configuration".
Sidelamps on
Rotate the ring A forwards.
Dipped beams/
main beams on
Dipped beams/main beams
dipswitch
Pull the control stalk towards you
to change between dipped beam
and main beam.
51