Steering wheel controls
Deactivation
Automatic switching on of the lights
Turn the ring forwards or rearwards.
The deactivation of this function is
accompanied by a message on the
display.
The function is deactivated temporarily
when you use the manual lights stalk.
If your vehicle is fitted
with a brightness
sensor, the side lights
and dipped beam
headlamps switch on
automatically if the
If the brightness sensor does not
function correctly, the lights come on
accompanied by the service warning
light, an audible signal and a message
on the display.
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers stop.
This function is not compatible with the
daytime lights.
Contact a CITROËN dealer.
HEADLAMPS BEAM
Depending on the load in your
vehicle, the beam setting must be
adjusted.
0 - 1 or 2 people in the front seats.
1 - 5 people.
2 - 6 to 8 people.
3 - Driver + maximum authorised
loads.
Initial setting is position 0.
Automatic "Follow-Me-Home"
lighting
In foggy weather or in snow,
the brightness sensor can
detect sufficient light. As a
consequence, the lights will not come
on automatically.
With the ignition off, when you leave
your vehicle with the automatic
switching on of the lights function
activated, the side lights and dipped
headlamps remain on for the selected
duration.
Do not cover the brightness
sensor located in the centre of the
fascia. It is used for the automatic
switching on of the lights and for the
automatic wipers.
To deactivate or activate this
function, go to the display
configuration menu.
AUTOMATIC ADJUSTMENT OF
THE XENON HEADLAMPS
The duration of the timed period must
also be set (15, 30, 60 seconds), via
the display configuration menu.
Carry out these operations when the
vehicle is stationary.
On vehicles which are fitted with xenon
headlamps, this system automatically
corrects the height of the light beam,
regardless of the load in the vehicle.
The driver is then guaranteed optimum
lighting without dazzling other road
users.
Activation
Turn the ring to the AUTO position.
The activation of this function is
accompanied by a message on the
display.
Cancelling:
"flash" the headlamps,
get out of the vehicle and lock it.