Get Safety -> Lane Departure Warning System Guide for Citroen Relay Van 2014-2024

Driving safely

Switching on

Switching off

On starting the vehicle, this system is

deactivated.

Press this button, located in the middle of

the dashboard, to deactivate the system;

the indicator lamp in the button goes off and

the ASr system is active again.

Press this button, located in the middle of

the dashboard, to activate the system; the

indicator lamp in the button comes on.

Intelligent traction control

System to improve traction on slippery

surfaces (snow, black ice, mud...)

Operating fault

This system is active up to about 18 mph

(30 km/h).

If a fault occurs with the intelligent

traction control system, this

warning lamp comes on.

This system checks for situations of difficult

surface adhesion that could make it difficult

to move off or make progress.

Once the speed exceed 18 mph (30 km/h),

the system is deactivated automatically, but

the indicator lamp in the button stays on.

Have the system checked by a CITROËN

dealer or a qualified workshop.

In these situations, Intelligent traction

control takes over from the ASr system,

by transferring drive to the wheel with the

best grip on the ground to provide the best

traction and trajectory control.

The system is reactivated automatically as

soon as the speed drops below 18 mph

(30 km/h).

5

Driving safely

Switching on

Switching off

On starting the vehicle, the system is

deactivated.

Press this button, located in the middle of the

dashboard, to deactivate the system; the indicator

lamp in the button goes off.

With the speed below 18 mph (30 km/h)

press this button, located in the middle of

the dashboard, to activate the system; the

indicator lamp in the button comes on.

Above 30 mph (50 km/h), the system is completely

deactivated; the indicator lamp in the button goes off.

Hill descent control

System that provides assistance when

descending on surfaces with poor grip (mud,

gravel...) or on a steep gradient.

The system may not be available if the

brakes overheat. Wait a few minutes

for them to cool down before trying again.

Once the vehicle starts its descent, you can

release the accelerator and brake pedals;

the indicator lamp in the button flashes.

This system reduces the risk of slip or loss

of control of the vehicle while descending

a hill.

The brake lamps come on automatically

when the system is brought into operation.

Operating fault

It keeps the vehicle at a steady speed during

a descent by acting independently and with

varying force on each of the brakes.

If the speed of the vehicle exceeds 18 mph

(30 km/h), the system is automatically

deactivated, but the indicator lamp in the

button stays on.

If a fault occurs with the hill

descent control system, this

warning lamp comes on.

The system reactivates automatically as

soon as the speed of the vehicle drops

below 18 mph (30 km/h).

Have the system checked by a CITROËN

dealer or a qualified workshop.

For the system to operate, the slope

must be steeper than 8%.

You can press the accelerator or brake

pedal at any time.

Do not use the system with the gearbox in

neutral.

Engage an appropriate gear for the speed of

the vehicle, to avoid the engine stalling.

Driving safely

The lane departure warning system

cannot, in any circumstances, replace

the need for vigilance on the part of

the driver.

Operating conditions

Once running, the system is only active

when the operating conditions are met:

-

The vehicle is moving forward.

No operating fault is detected in the

vehicle.

If the windscreen is damaged, it is strongly

recommended that you go to a CITROËN

dealer or a qualified workshop for any

replacement or calibration of the camera.

-

The vehicle is moving at a speed of at

least 37 mph (60 km/h).

The longitudinal lane markings on the

ground are clearly visible.

-

The conditions of visibility are normal.

LAnE dEPArturE WArnInG

SYStEM

Operation

The vehicle is in a straight line trajectory

(or if cornering, the corners are of large

radius).

The system starts automatically when

moving off.

System which detects the involuntary

crossing of longitudinal traffic lane markings

on the ground (continuous or discontinuous

line).

-

The field of vision is sufficiently clear

(the safe distance from the vehicle in

front is observed).

A check of the operating

conditions takes place: these two

indicator lamps come on in the

instrument panel.

-

If a lane marking is crossed (when

changing lane for example), the

corresponding direction indicator (left or

right) for the manoeuvre, is not used.

A camera, fitted at the top centre of the

windscreen monitors the road and detects

lane markings and the position of the vehicle

within them.

-

The vehicle's trajectory matches the

lane markings on the road.

With the vehicle running at a speed higher

than 35 mph (60 km/h), it triggers a warning

if the vehicle drifts off line.

When these conditions are met, these

two indicator lamps go off. The system is

activated.

This system operates to its full potential in

particular when used on motorways and

main roads.

If the operating conditions are not met,

the system is activated but is no longer

effective. This is signalled by the fixed

illumination of these two warning lamps in

the instrument panel.

5

Driving safely

detection

The system may suffer interference or

not work correctly:

If a change of direction is detected, you are

alerted by a warning lamp in the instrument

panel and an audible signal:

-

When the vehicle is carrying a very

heavy load (even more so if the load is

not evenly spread).

-

ﬂashing of the left hand warning

lamp, if drifting to the left,

-

When the conditions of visibility are poor

(rain, fog, snow, ...).

When the lighting conditions are poor

(dazzling sun, shade, ...).

-

ﬂashing of the right hand warning

lamp, if drifting to the right.

If the windscreen is dirty or damaged

close to the camera.

If the ABS, DSC, ASR or Intelligent

Traction Control systems are out of

service.

Switching off

No warning is given while the direction indicator

is active and for approximately 20 seconds after

the direction indicator is switched off.

-

Press this button to switch off the

system, the indicator lamp in the button

comes on.

A warning may be given if a direction marking

(arrow) or non-standard marking (grafﬁti) is

crossed.

The status of the system remains in the

memory when the ignition is switched off.

The detection may suffer interference:

Switching on

Operating fault

-

if the markings on the ground are worn,

-

Press this button to switch the system

on, the indicator lamp in the button

goes off.

-

if there is little contrast between the

markings on the ground and the road

surface.

If a fault occurs with the system,

this warning lamp comes on,

accompanied by an audible

message and confirmed by a

message in the screen.

The two indicators in the instrument panel

remain on up to 37 mph (60 km/h).

The system is automatically deactivated

if the Stop & Start system is active. The

system will restart and check the operating

conditions again when the vehicle moves off.

Have the system checked by a CITROËN

dealer or a qualified workshop.

Safety -> Lane Departure Warning System for Your Citroen Relay Van 2014-2024

Related Topics

Safety

Popular Owner Manuals

Latest Owner Manuals