Seat belts
Seat belts not fastened
warning lamp
When the vehicle is started, this warning
lamp comes on, accompanied by an
increasing audible signal, if the driver and/
or the front passenger has not fastened their
seat belt.
The alert operates both for versions with
an individual passenger front seat and for
versions with a 2-seat front bench seat.
If the driver's seat belt is unfastened,
START mode of Stop & Start will not be
invoked. Engine restarting is only possible
with the ignition key.
cAB SEAt BELtS
Fastening
Pull the strap in front of you with an even
movement, ensuring that it does not twist.
The driver's seat is fitted with a pyrotechnic
pretensioner and a force limiter.
Engage the tongue in its buckle.
On versions with a passenger's front airbag,
the passenger's seat is also fitted with a
pyrotechnic pretensioner and a force limiter.
Check that the seat belt is fastened securely
and that the automatic locking system is
operating correctly by pulling the strap
rapidly.
The front bench seat is fitted with two seat
belts.
If you install a front bench seat as
an accessory, it it must be fitted with
approved seat belts.
unfastening
Height adjustment
Press the red button on the buckle, the
seat belt reels in automatically but you are
advised to guide it.
For the driver or outer passenger seat,
squeeze the control at the adjustable top
mounting, slide the assembly, then release
at the desired position to lock it.
As a safety measure, these operations
should not be carried out while the
vehicle is moving.
The height of the seat belt for the centre
seat cannot be adjusted.
English 
