2002-2008 Cupra Born SUV Assistant systems -> ACC - Adaptive Cruise Control User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Assistant systems -> ACC - Adaptive Cruise Control for Your Cupra Born SUV First Generation (2002-2008)

ACC - AdaptiveCruiseControl  
Speed range  
Troubleshooting  
WARNING  
You can set a speed between 20 km/h (15  
mph) and the maximum speed of the vehicle.  
The ACC’s technology cannot overcome the  
system's inherent limitations or change the  
laws of physics. If used negligently or invol-  
untarily, it may cause serious accidents and  
injuries. The system is not a replacement for  
driver awareness.  
A message is displayed indicating that pro-  
active speed adjustment is not currently  
available or not oꢀered in your country.  
The ACC can bring the vehicle to a standstill if  
a vehicle in front stops.  
●
If this message is displayed for a longer pe-  
riod of time and proactive speed adjustment  
is available in your country, please contact a  
specialist workshop.  
Driving with ACC  
●
●
Always be prepared to brake or accelerate.  
If you press the accelerator pedal the ACC  
You can override the ACC at any time. Brak-  
ing interrupts the ACC. If you accelerate, reg-  
ulation is interrupted during acceleration and  
then resumed.  
will stop working. Therefore, it will not brake  
or request any braking intervention.  
Note  
●
Adapt your speed and safe distance to the  
Depending on the anomaly in question, addi-  
tional information may be displayed in Vehi-  
vehicle in front of you at all times to suit visi-  
bility, weather, road and traꢀic conditions.  
Driver intervention prompt  
cle status ››› page 34.  
ACC is subject to certain limitations in-  
herent to the system. This means that the  
driver will have to control the speed and  
distance from other vehicles in certain sit-  
uations. In this case, the instrument clus-  
ter display will tell you to intervene by  
applying the brake, and an audio warning  
will be played.  
●
Do not use the ACC in poor visibility, or on  
roads that are steep, with lots of curves or  
slippery.  
ACC - Adaptive Cruise  
Control  
●
Never use ACC when driving oꢀ-road or on  
unpaved roads.  
●
The system may not react in time to  
stationary obstacles (such as a traꢀic jam  
queue), particularly at high speeds. React  
soon enough to avoid a hazardous situation.  
Introduction  
Adaptive Cruise Control (ACC) maintains a  
constant speed set by the driver. When ap-  
proaching another vehicle in front, the ACC  
detects it and adapts the speed automatically,  
maintaining a distance set by the driver.  
Radar sensors  
●
The system may not react to stopped vehi-  
The ACC uses the front radar technology. Read  
its maintenance instructions and information  
about its limitations ››› page 156.  
cles in the same lane. You must react early  
enough yourself in this case.  
●
The system does not react to people, an-  
imals or vehicles that are crossing or ap-  
proaching in the opposite direction.  
Does my vehicle have ACC?  
●
If you are driving with a spare wheel ꢁtted,  
Your vehicle has ACC if it has a conꢀguration  
menu in the infotainment system.  
the ACC system could automatically switch  
oꢀ. Switch oꢀ the system when starting oꢀ.  
163  
Assistant systems  
ACC operation  
Connecting  
●
Brake immediately if the ACC does not slow  
down enough.  
●
Press the button on the multifunction  
●
Brake immediately when a driver interven-  
steering wheel ››› Fig. 126.  
The ACC does not regulate anything yet  
(standby).  
tion instruction is displayed on the instru-  
ment cluster screen.  
●
If the vehicle continues to move involun-  
tarily after a driver intervention prompt,  
brake the vehicle.  
Start regulation  
Activating the ACC system also automatically  
activates the ESC and traction control (TCS).  
●
The brake pedal may move downwards dur-  
ing braking. Be careful not to position your  
foot under the pedal.  
●
To start regulation, press the button  
››› Fig. 126.  
Fig. 125 On the instrument panel display:  
ACC active.  
Note  
The ACC saves the current speed and main-  
tains the set distance. If the current speed is  
outside the preset speed range, ACC sets the  
minimum speed (if driving slowly) or maximum  
speed (if driving fast).  
If the ACC does not work as described in  
this chapter, do not use it until it has been  
checked by a specialised workshop. CUPRA  
recommends visiting a specialised CUPRA  
dealer or any SEAT dealership.  
Depending on the driving situation, the follow-  
ing indicator lamps come on:  
Lights up green  
ACC connected, no vehicle detected in  
front.  
Lights up green  
ACC connected, vehicle detected in  
front.  
Fig. 126 On the multifunction steering  
wheel: buttons for operating the ACC.  
When the ACC is in standby, the indicator  
lamps light up grey.  
››› Fig. 125  
1
Vehicle ahead detected. It will light up if  
the distance to the vehicle is adjusted.  
2
Selected distance level 2.  
164  
ACC - AdaptiveCruiseControl  
Reinstating the cruise control  
Setting speed  
WARNING  
●
To program the speed, press the or  
››› Fig. 126 buttons to the desired speed. The  
speed is adjusted at intervals of 10 km/h (5  
mph).  
Press the  
button. The ACC regulates to  
Before driving oꢀ, check that the road is  
clear. The radar sensor may not detect ob-  
stacles on the road. This could cause an acci-  
dent and serious injuries. If necessary, apply  
the brake.  
the last speed and distance setting.  
●
OR: Press the button  
to regulate to the  
current speed.  
While the ACC is active, you can press the  
Switching oꢀ  
button to increase the desired speed by 1 km/h  
(1 mph). You can then press  
by 1 km/h (1 mph).  
to decrease it  
NOTICE  
●
Press and hold the button . The set speed  
is cleared.  
If you increase speed using the accelerator  
pedal, the ACC may not be able to safely  
adjust the speed of the distance due to the  
limitations of the system.  
Setting your distance level  
Exceeding the speed regulated by the ACC  
The distance can be set to one of ꢀve levels,  
from very short to very long:  
While driving with the ACC switched on, the  
driver can increase speed by pressing the ac-  
celerator pedal. ACC regulation is suspended  
●
Be prepared to react if required by the sit-  
uation.  
●
Press the button and then the button or  
››› Fig. 126.  
until you release the accelerator pedal ›››  
.
●
Alternatively, press the button as many  
Special driving situations  
Set the default distance setting  
times as necessary to set the desired distance.  
In the Infotainment system, you can pre-select  
the distance level when connecting the ACC  
from:  
Keep in mind each country’s regulations on  
minimum braking distances.  
Suspend regulation (standby)  
●
Very short, Short, Medium, Long and Very  
long using the Infotainment system:  
Driver assistants > Smart Assistants > ACC  
››› page 35.  
>
●
Brieꢁy press the button ››› Fig. 126 or  
press the brake pedal.  
The ACC indicator lamp is grey; the speed and  
distance are saved.  
Changing the driving proꢁle  
If the ESC or TCS is switched oꢂ, the ACC is  
automatically interrupted.  
The driving proꢀle selected can aꢂect  
ACC acceleration and braking behaviour  
››› page 149.  
Fig. 127 On the instrument panel display:  
ACC active, vehicle detected on the left.  
165  
Assistant systems  
Be aware of the limitations and warnings  
described at the beginning of this chapter  
››› page 163, Introduction.  
The ACC remains active and the message ACC  
ready to startis displayed on the instru-  
ment cluster for a few seconds. You can extend  
or reactivate this warning by pressing the but-  
●
Always check the road before moving oꢀ,  
and apply the vehicle brakes yourself if nec-  
essary.  
ton  
or by grabbing the wheel if your vehicle  
Avoid undertaking on the right1)  
is ꢀtted with Travel Assist. During this time, the  
vehicle will move oꢂ again if the vehicle in front  
moves forwards.  
ACC system limitations  
If a vehicle is detected in the left lane that is  
travelling at a speed slower than that set by  
the driver, it will brake the vehicle within the  
comfort limits of the system to avoid passing it  
To move oꢂ when the message ACC ready  
to startis not longer displayed, once the  
vehicle in front has moved oꢂ:  
on the right ››› Fig. 127.  
You can cancel this regulation by changing the  
set speed or by pressing the accelerator pedal.  
●
●
Press the accelerator pedal.  
OR: press the button on the multifunc-  
The function works at speeds over 80 km/h  
(50 mph). It may not be available in certain  
countries.  
tion steering wheel.  
The ACC does not remain active in the follow-  
ing cases:  
●
●
●
The stopping phase lasts for several minutes.  
When a vehicle door is opened.  
Overtaking  
When the turn signal is switched on for over-  
taking, the ACC reduces the distance from the  
vehicle in front to help with the overtaking ma-  
noeuvre. The set cruising speed will not be ex-  
ceeded.  
If the ignition is switched oꢂ.  
Fig. 128  
Vehicle on a bend.  
WARNING  
Motorcyclist ahead, out of range of the  
radar sensor.  
If the message ACC ready to startis  
displayed on the instrument cluster display  
and the vehicle in front moves oꢀ, your vehi-  
cle will move oꢀ automatically. In this case,  
any obstacles in the road may not be detec-  
ted. This may cause serious accidents and in-  
juries.  
The function works at speeds over 80 km/h  
(50 mph). It may not be available in certain  
countries.  
Stop&Go function  
The ACC can bring the vehicle to a standstill if  
the vehicle in front stops.  
1)  
Or on the left, in countries that drive on the left hand side of the road.  
166  
ACC - AdaptiveCruiseControl  
●
●
On roads with embedded metal objects such  
Vehicles travelling in the opposite direction  
as train or tram tracks.  
or crossing the road.  
●
●
On roads with loose gravel.  
Other stationary obstacles  
Pay special attention when using ACC in the  
following situations:  
The ACC may not react to stationary vehicles.  
If, for example, a vehicle detected by the ACC  
turns or moves over and there is a stationary  
vehicle in front of it, the ACC will not react to  
On curves  
the second vehicle ››› Fig. 129  
.
The ACC may not detect the vehicle in front  
on a curve, or may regulate the distance from  
WARNING  
vehicles in other lanes ››› Fig. 128  
.
Using the ACC in the above situations can  
cause serious accidents and injuries, and you  
could break the law.  
Vehicles outside the sensor zone  
In the following situations the ACC may not  
react, or may react slowly or inappropriately:  
Fig. 129  
Vehicle changing lanes. One  
●
Vehicles that are not aligned while driving or  
Troubleshooting  
vehicle turning and another stationary.  
that are outside the sensor's detection area,  
ACC not available  
such as motorcycles ››› Fig. 128  
.
The limits of the ACC system mean that it is not  
●
Vehicles that move into your lane, a short  
appropriate in all situations ›››  
in Introduc-  
distance from your vehicle ››› Fig. 129  
.
The indicator lamp lights up yellow:  
tion on page 163.  
●
Vehicles with loads or accessories that pro-  
●
The radar sensor is dirty or adjusted in-  
CUPRA does not recommend using the func-  
tion in the following cases ›››  
trude from the sides, rear or roof.  
correctly. Take into account the warnings  
described at the beginning of this chapter  
››› page 156  
There is a fault or a defect. Turn oꢂ the vehi-  
cle's ignition and turn it on again after a few  
minutes.  
:
●
●
●
●
Heavy rain, snow or fog.  
Objects that are not detected  
When going through tunnels.  
In sections with roadworks.  
●
The ACC function only detects and reacts to  
vehicles moving in the same direction. There-  
fore it does not detect:  
On routes with curves, e.g. on mountain  
roads.  
●
If the problem persists, consult a specialised  
●
●
People  
●
●
workshop.  
On oꢂ-road routes.  
In covered car parks.  
Animals  
167  

Related Topics

Popular Owner Manuals