2002-2008 Cupra Born SUV Assistant systems -> Driving Assist (Travel Assist) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Assistant systems -> Driving Assist (Travel Assist) for Your Cupra Born SUV First Generation (2002-2008)

DrivingAssist(Travel Assist)  
How to know if the vehicle is ꢀtted with  
Travel Assist  
Status display  
Note  
After switching on the ignition, it may take a  
few seconds before a fault is detected in the  
system.  
The vehicle is ꢀtted with Travel Assist if the  
multifunction steering wheel has the  
ton.  
but-  
Note  
Speed range  
If Lane Assist is unavailable, Emergency Assist  
and Travel Assist will be unavailable as well.  
Travel Assist regulates at speeds over 0 km/h  
(0 mph). The set speed can be adjusted at  
speeds over 20 km/h (15 mph).  
Driving Assist (Travel As-  
sist)  
Fig. 134 On the instrument cluster display:  
display of active regulation (schematic  
representation).  
Driving with Travel Assist  
Travel Assist automatically controls the accel-  
erator pedal, the brakes and the steering.  
In addition, Travel Assist may, within its limi-  
tations, decelerate the vehicle until it stops  
behind another that stops and automatically  
starts again.  
Introduction  
1
The colour of the lane markings indicates  
the status of the adaptive lane guidance  
function.  
Travel Assist combines adaptive cruise control  
(ACC) and the adaptive lane guidance func-  
tion. Within the limitations of the system, the  
vehicle can maintain a distance from the vehi-  
cle in front that is preselected by the driver  
and remain in the preferred position within the  
lane.  
●
Yellow: adaptive lane guidance function  
You can override assisted adjustment at all  
times.  
active.  
●
White: adaptive guidance function avail-  
able.  
●
Grey: passive adaptive lane guidance  
Travel Assist uses the same sensors as Adaptive  
Cruise Control (ACC) and Lane Assist. There-  
fore, carefully read the information about  
function.  
2
Distance set.  
Depending on the equipment, there is  
also an indication on the Head-up-Display  
››› page 23.  
Depending on the equipment, additional de-  
tails, e. g. dashed road markings and vehicles  
in front, can also be shown on the instrument  
cluster display.  
the ACC ››› page 163 and the Lane Assist  
››› page 174 and take into account the limita-  
tions of the systems and the indications given  
in the information.  
177  
Assistant systems  
Control lamps indicate the status of the system  
on the instrument panel display:  
This makes it possible to increase the availabil-  
ity of Travel Assist in certain driving situations,  
e.g. when the road markings are incomplete or  
missing on one side of the road.  
●
Do not use Travel Assist when visibility is  
bad, on steep roads, on windy roads or in slip-  
pery circumstances (e. g., snow, ice, rain or  
loose gravel), or on ꢂooded roads.  
Green lamp: travel Assist active, adaptive  
cruise control and adaptive lane guid-  
ance function are active.  
●
Do not use Travel Assist oꢁroad or on roads  
Requirements:  
where the surface is not ꢀrm. Travel Assist  
has been designed for use on paved roads  
only.  
●
●
Partially green lamp: Travel Assist active,  
adaptive cruise control active and adap-  
tive lane guidance function passive.  
Travel Assist is activated.  
Your CUPRA Connect subscription is activa-  
ted.  
●
Travel Assist does not react to people or  
Grey lamp: Travel Assist deactivated, not  
regulating.  
●
●
●
You have an Internet connection.  
animal or vehicles crossing your path or  
which approach you head-on in the same  
lane.  
The use of online map data is activated.  
The upload function for all map data collec-  
●
Brake immediately if Travel Assist does not  
Driver intervention prompt  
ted from your vehicle is enabled (optional).  
slow down enough.  
If you remove your hands from the steering  
wheel, after a few seconds the system asks  
you to take over the steering with an indication  
on the instrument panel display and acoustic  
warnings.  
●
Brake immediately when instructed to do  
WARNING  
so on the instrument cluster display, or if  
Travel Assist does not reduce speed suꢁi-  
ciently.  
The Travel Assist smart technology cannot  
overcome the limits imposed by the laws of  
physics and it only works within the limits  
of the system. If Travel assist is used negli-  
gently or involuntarily, it may cause serious  
accidents and injuries. The system is not a  
replacement for driver awareness.  
●
Brake when the vehicle continues to move  
If you do not react, Travel Assist is deactivated.  
forward without it being desired after an indi-  
cation to brake.  
Depending on the equipment, Emergency As-  
sist activates if it is activated in the infotain-  
ment system.  
●
If possible, do not wear gloves while driv-  
ing. The system could interpret this as no  
driving activity.  
●
Bear in mind the system limitations and  
the indications regarding the control of the  
Adaptive Cruise Control (ACC) and Lane As-  
sist.  
Travel Assist with online data1)  
●
Keep your hands on the steering wheel at  
all times, to ensure you have control over the  
steering at all times. The driver is always re-  
sponsible for keeping the vehicle in its own  
lane.  
Travel Assist with online data uses online map  
data to enhance its performance (depending  
on equipment and not available in all coun-  
tries).  
●
Adapt your speed and safety distance to  
the vehicle in front of you at all times to  
suit visibility, weather, road and traꢁic condi-  
tions.  
●
Always be prepared to adjust the speed  
yourself.  
1)  
Not available on all markets.  
178  
DrivingAssist(Travel Assist)  
●
When ACC is regulating, Travel Assist main-  
Using the lane change assist  
Note  
tains the current speed and the preset dis-  
tance to the vehicle in front.  
Online services provided and activated  
through CUPRA Connect (depending on de-  
vice and country) may enhance the opera-  
tion of Travel Assist when connected to the  
Internet.  
Lane Change Assist uses the same sensor sys-  
tem as Side Assist. Therefore, read the infor-  
mation on Side Assist ››› page 183 carefully  
and observe the limits of the system and the  
notes that it displays.  
When lane markings are detected, the vehicle  
is also kept in the lane by steering movements.  
●
If ACC is not regulating, Travel Assist remains  
selected but in a passive (unregulated) status.  
Activating the convenience turn signal on a  
motorway, provided that the prerequisites are  
met and no vehicles have been detected in the  
vicinity, provides assistance when the vehicle is  
changing lanes.  
1. Press the button.  
Operating Travel Assist  
Travel Assist switches to the active system  
status, depending on the driving situation.  
The indicator lamp for the driving situation  
lights up on the instrument cluster display. A  
message is also displayed.  
Prerequisites  
Lane change assist is only available, depend-  
ing on the vehicle's equipment, when driving  
forwards on multi-lane motorways included in  
the Infotainment system’s navigation data, and  
when travelling faster than 90 km/h.  
Interrupting the adjustment  
1. Brieꢁy press the button  
.
OR: press the brake pedal.  
The set distance remains saved.  
Travel Assist must also be activated.  
Fig. 135 Left side of the multifunction  
steering wheel  
Switch to ACC  
1. Press the  
steering wheel.  
button on the multi-function  
Switch on and start regulation  
1. While driving with ACC activated, press  
on the multifunction steering wheel.  
The vehicle switches from Travel Assist to  
the ACC system status corresponding to  
the driving situation.  
The vehicle switches from ACC to Travel  
Assist.  
Making other adjustments  
Depending on the driving situation, the vehi-  
cle switches to the following system statuses in  
Travel Assist:  
All other aspects of Travel Assist are controlled  
like the ACC.  
179  
Assistant systems  
1. Access the assistant menu.  
2. Select Travel Assist.  
When changing lanes, the vehicle automati-  
cally activates the turn signal on the corre-  
sponding side. Once the lane change is com-  
plete, the turn signal automatically switches  
oꢂ.  
Status display  
3. Activate or deactivate lane change assist as  
a sub-function of Travel Assist.  
Note  
WARNING  
●
If a fault occurs in the system, the lane  
change assist may automatically switch oꢁ or  
be interrupted during the lane change.  
The sensor system cannot reliably detect all  
objects in the surroundings and operates ex-  
clusively within the limits of the system. If you  
use the lane change assist irresponsibly, ac-  
cidents and serious injuries can occur. The  
system is not a replacement for driver aware-  
ness.  
●
If Side Assist is not available, lane change  
assist is not available either.  
Activating lane change assist while driving  
Fig. 136 On the instrument cluster screen:  
lane change assist display (schematic  
representation).  
1. Press the  
button.  
●
Before changing lanes, make sure it is safe  
to do so. In particular, rapidly approaching  
objects may not be detected in time.  
Lane change assist is activated. The arrows  
of your own lane on the instrument cluster  
display are grey ››› Fig. 136  
1
●
Lane highlighted, the assisted lane change  
Keep your hands on the steering wheel at  
2
all times and be prepared to control your own  
speed and direction of travel.  
takes place.  
2
Arrows in the vehicle's own lane show the  
status of the lane change assist.  
Changing lanes  
If the system detects no objects in the detec-  
tion ꢀeld of the sensor system and an assisted  
lane change to an adjacent lane is possible, the  
corresponding lane is shown in the instrument  
cluster display next to the driver’s own lane.  
The arrow on the corresponding side of the  
2
Turning oꢁ the lane change assist  
●
Grey: changing lanes to the respective  
side of the lane is not possible.  
1. Brieꢁy press the button  
.
●
Orange: Changing lanes is possible on  
OR: Press the brake pedal.  
the respective side of the lane.  
Lane change assist is deactivated. Travel  
Assist is also deactivated.  
lane is displayed in white ››› Fig. 136  
.
Activating and deactivating lane change as-  
sist  
1. When the convenience turn signal is ac-  
tivated on the desired side, the vehicle  
changes lane. A message is also displayed.  
You can activate and deactivate lane change  
assist in the Infotainment system.  
180  

Related Topics

Popular Owner Manuals