2002-2008 Cupra Born SUV Assistant systems -> Speed limiter User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Assistant systems -> Speed limiter for Your Cupra Born SUV First Generation (2002-2008)

Speedlimiter
●
●
Top View Camera ››› page 206.  
Rear View Camera ››› page 204.  
●
Never use auto lane changing or the rear  
Note  
cross traꢀic alert if the radar sensors are  
dirty.  
●
In order to guarantee good operation, keep  
the sensors clean, free of snow and ice, and  
do not cover them with stickers or other ob-  
jects.  
●
Radar operation may also be aꢀected if ob-  
WARNING  
jects such as bicycle racks or luggage racks  
interfere with the visibility of the radars.  
Fitting a number plate frame may interfere  
with the view shown on the screen, as it may  
reduce the camera’s ꢂeld of vision.  
●
If you use high-pressure or vapour equip-  
ment for cleaning, do not apply it directly,  
unless you do so very brieꢁy, and always keep  
a distance of more than 10 cm away.  
Ultrasound sensors  
The bumpers are ꢀtted with ultrasound sen-  
sors to perform the following functions:  
●
Fitting certain accessories to the front of  
NOTICE  
the vehicle, such as a plate holder with ad-  
vertising, may interfere with the operation of  
the Park Assist.  
●
In order to guarantee good system opera-  
tion, keep the cameras clean, free of snow or  
ice, and do not cover them with stickers or  
other objects. The camera can be cleaned by  
operating the wiper.  
●
Automatic parking system ››› page 194  
●
Park assist plus ››› page 191.  
Area View system  
●
Never use abrasive cleaning products to  
clean the camera lens.  
NOTICE  
●
Damage to the radiator grille, bumper,  
●
Do not use hot or warm water to remove ice  
wheel arch and vehicle underbody can mod-  
ify the orientation of the sensors. This can af-  
fect the parking aid function. Have the func-  
tion checked by a specialised workshop.  
or snow from the camera lens. Doing so could  
damage the camera.  
●
A number plate or number plate holder  
Speed limiter  
with dimensions that exceed the space for  
the number plate, or a cured or deformed  
number plate can cause false detections or a  
loss of visibility for the sensors.  
Introduction  
The speed limited helps the driver not to ex-  
ceed a set speed.  
Fig. 123 On the rear bumper: location of  
the rear assist camera.  
Speed range  
Depending on your vehicle’s equipment, it can  
be ꢀtted with 1 or 4 cameras that provide sup-  
port to the following functions:  
The speed limiter helps avoid exceeding a pro-  
grammed speed, from 30 km/h (20 mph) ap-  
prox. and faster.  
159  
Assistant systems  
By selecting the speed limiter  
Adjusting the speed  
●
Using the speed limiter under adverse  
weather conditions is dangerous and can  
cause serious accidents, e.g. aquaplaning,  
snow, ice, leaves, etc. Only use the speed  
limiter when the status of the road and the  
weather conditions allow it.  
The speed limitation can be interrupted at any  
time by depressing the accelerator pedal fully,  
beyond the point of resistance. As soon as the  
saved speed is exceeded, the green indicator  
light ꢁashes and an audible warning signal may  
sound. The speed is stored.  
The programmed speed can be set:  
+ 1 km/h (1 mph)  
- 1 km/h (1 mph)  
+ 10 km/h (5 mph)  
- 10 km/h (5 mph)  
The limiter is reactivated automatically after re-  
turning to less than the set speed.  
Operating the speed limiter  
Interrupting the adjustment  
Status display  
●
Press the button.  
When the speed limiter is switched on, the  
instrument cluster display shows the saved  
speed and the system status:  
The speed is stored.  
Reinstating the cruise control  
●
Press the  
button.  
It lights up grey  
The limiter will re-activate as soon as the vehi-  
cle is moving at a speed lower than the saved  
one.  
The speed limiter is switched on but reg-  
ulation is not active.  
Fig. 124 On the multifunction steering  
wheel: buttons to control the speed limiter.  
Lights up green  
The speed limiter is switched on and ac-  
tive.  
Switching oꢀ  
●
Press and hold the button  
.
Connecting  
The speed limiter switches oꢂ and the speed is  
deleted.  
●
Press the button.  
WARNING  
It does not take eꢂect yet.  
After use, always switch oꢀ the speed limiter  
to prevent the speed being regulated against  
your wishes.  
Switch to another driver assistance system  
Start regulation  
Depending on the equipment, you can switch  
to the following driver assistance systems:  
●
The speed limiter does not relieve the  
●
While driving, press the button  
.
driver of their responsibility to drive at the  
appropriate speed. Do not drive at high  
speed if not necessary.  
The current speed is saved as a limit speed.  
●
●
Adaptive Cruise Control (ACC)  
Speed limiter.  
160  

Related Topics

Popular Owner Manuals