2002-2008 Cupra Born SUV Checking and refilling levels User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Checking and refilling levels for Your Cupra Born SUV First Generation (2002-2008)

Checking and reꢀlling levels  
●
●
Never touch damaged components of the  
Always inform the ꢀre brigade emergency  
Checking and reꢀlling  
levels  
high-voltage system or rub against them with  
jewellery or other metal objects. It is not al-  
ways possible to detect that they are dam-  
aged.  
services that the vehicle is ꢀtted with a high-  
voltage battery.  
WARNING  
Front compartment  
●
Never work on the orange high-voltage ca-  
bles or other high-voltage components. Only  
specialist workshops authorised to work on  
the high-voltage system are permitted to  
work on it.  
If works are performed on the high-voltage  
system and on the high-voltage components  
in an inappropriate manner, this may lead  
to faults in the operation, accidents and inju-  
ries.  
Working in the front compartment  
The vehicle’s front compartment is a hazard-  
ous area. You should only perform works in the  
engine compartment if you have good knowl-  
edge of the necessary operations and the gen-  
eral safety measures, and if you have adequate  
tools, means and operating ꢀuids. Works per-  
formed inadequately, could lead to serious in-  
●
Never damage, modify or remove the  
orange coloured high-voltage cables, and  
never uncouple them from the high-voltage  
network.  
●
Only specialist workshops authorised to  
work on the high-voltage system are permit-  
ted to work on it.  
●
Never work near high-voltage components  
and cables if tools that are sharp, cause de-  
formation or give of shavings, or heat sour-  
ces, are required. Only authorised specialist  
workshops are permitted to work on or near  
the high-voltage system.  
WARNING  
juries ››› . In this case, seek a specialised  
workshop to perform all the works. To do so,  
CUPRA recommends going to a specialised  
CUPRA dealer or any SEAT dealership.  
Any accidental movement of the vehicle dur-  
ing maintenance work could cause serious  
injuries.  
●
The gases that are released or leaked from  
Before performing any work in the engine  
compartment, always park the vehicle on level  
and ꢁrm ground, taking all necessary safety  
precautions.  
●
Never perform works underneath the vehi-  
the high-voltage battery may be toxic or  
ꢂammable.  
cle without having ꢀrst immobilised it to pre-  
vent it from moving. When working under the  
vehicle with the wheels on the ground, the  
vehicle must be on a level surface and the  
wheels must be locked.  
●
Any damage caused to the vehicle or the  
high-voltage battery can lead to an immedi-  
ate or subsequent leak of toxic gases or liq-  
uids. These gases can also cause a ꢀre. Do  
not inhale the gases.  
WARNING  
●
If work must be performed underneath  
The high voltage system voltage is dangerous  
and can cause burns, other injuries and fatal  
electric shocks.  
the vehicle, take the extra precaution of sup-  
porting it safely using suitable assembly sup-  
port. The jack is not suitable for this purpose  
and may not withstand, which could lead to  
serious injuries.  
●
Never touch liquids that may leak from the  
high voltage battery.  
●
Always assume that the high-voltage bat-  
●
In the event of a ꢀre, leave the danger area  
tery is charged and that all high-voltage  
components are live. This can be the case  
even when the ignition is switched oꢁ.  
and call the ꢀre department.  
282  
Front compartment
●
When the electric drive system is hot, its  
WARNING  
WARNING  
cooling system is under pressure. Do not  
open the expansion tank cap, hot coolant  
may splash out and cause severe burns and  
other injuries.  
The front compartment of any vehicle is a  
hazardous area in which serious injuries can  
occur!  
There are rotating parts in the front com-  
partment which could cause serious injury.  
●
Never insert your hand in the radiator fan  
●
When performing any type of work, always  
or around that area. All the rotor blades can  
cause serious injuries. The fan activates de-  
pending on the temperature and can switch  
on automatically, even if the ignition is oꢁ.  
–
Turn the coolant expansion tank cap  
ensure you are extremely cautious, and bear  
in mind the general safety measures. Never  
put yourself at risk.  
slowly and very carefully anticlockwise  
while pressing it down slightly.  
–
Always protect your face, hands and arms  
●
●
Never work in the front compartment if you  
If you have to perform works during the  
from the hot coolant and steam with a  
large thick cloth.  
do not have solid knowledge of the necessary  
operations. If you are unsure of what needs  
to be done, seek a specialised workshop to  
perform the works. Works performed inade-  
quately, could lead to serious injuries.  
disconnection of the drive system or which  
it connected, bear in mind that the rotating  
parts (i.e. the radiator fan) represent a fatal  
hazard. Always act with extreme care.  
WARNING  
–
Ensure that no part of your body, or any  
The electrical system is under high voltage  
and can cause electrical shocks, burns, seri-  
ous injuries and even death!  
●
Never open or close the front bonnet if  
jewellery or tie, loose clothing, loose long  
hair can become trapped in the rotating  
parts. Before performing works in the en-  
gine compartment, remove any jewellery  
or tie you may be wearing, tie up your hair if  
it is long and gather any loose clothing.  
steam or coolant is escaping. Steam or hot  
coolant can cause severe burns. Always wait  
until you no longer see or hear steam or cool-  
ant escaping from the front compartment.  
●
Never short circuit the electrical system.  
The 12-volt battery could explode.  
●
To reduce the risk of suꢁering a fatal elec-  
●
If you touch hot parts of the electric drive  
trical shock and serious injuries, while the  
drive system is connected or is connecting,  
never touch the high-voltage components,  
the high-voltage battery or the high-voltage  
system, especially the orange coloured high-  
voltage cables.  
–
system, you may suꢁer skin burns.  
Do not press the accelerator pedal while  
not paying attention. Always do so with ex-  
treme care.  
●
Before opening the front bonnet, please  
note the following:  
●
Do not leave objects in the front compart-  
–
The electronic parking brake must be ap-  
ment, e.g. rags or tools. They could cause  
functional failures, damage to the electric  
drive system and even a ꢀre.  
plied.  
–
Keep the vehicle key in a safe place and  
at a safe distance from the vehicle so that  
it is not possible to inadvertently switch on  
the drive system and energise the electrical  
system.  
–
Always keep children away from the front  
compartment and never leave them unat-  
tended.  
283  
Checking and reꢀlling levels  
NOTICE  
1. Place the vehicle on level and ꢁrm ground,  
taking all necessary safety precautions.  
WARNING  
If additional insulating elements such as  
blankets are placed in the front compart-  
ment, this could prevent the electric drive  
system from operating properly, could cause  
a ꢀre and could result in serious injury.  
When reꢀlling or changing the operating ꢂu-  
ids, ensure you pour the correct ꢂuids into  
their corresponding ꢀller caps. Using the  
wrong operating ꢂuids can lead to serious  
malfunctions and motor damage.  
2. Press the brake pedal and keep it pressed  
until you disconnect the drive system.  
3. Apply the electronic parking brake on the  
gear selector.  
●
Never cover the electric drive system with  
4. Disconnect the drive system ››› page 144.  
5. Remove the vehicle key from the vehicle  
and store it outside to avoid inadvertently  
blankets or other insulating materials.  
NOTICE  
After an accident or having hit an obstacle  
with the vehicle underside, the high-voltage  
battery must be checked by duly qualiꢀed  
and trained technicians.  
starting the vehicle ››› page 145.  
6. Always keep other people away from the  
front compartment.  
WARNING  
Operating ꢂuids and some materials in the  
front compartment are highly ꢂammable and  
can cause ꢀre and serious injury!  
7. Immobilize the vehicle so that it cannot  
move.  
●
●
Never smoke near the front compartment.  
Never perform works close to unprotected  
For the sake of the environment  
Operating ꢂuids that overꢂow from the ve-  
hicle contaminate the environment. There-  
fore, check underneath the vehicle on a reg-  
ular basis. If there are marks left by operat-  
ing ꢂuids on the ground, consult a special-  
ised workshop and request the vehicle be  
checked. If any operating ꢂuid leaks out, dis-  
pose of it in the correct manner.  
ꢂames or sparks.  
WARNING  
●
When you must perform works on the on-  
For your own safety, do not ignore this im-  
portant check list, otherwise this could cause  
accidents and serious injuries.  
board 12 volt electrical system, bear in mind  
the following:  
–
Always disconnect the 12 volt battery.  
●
Always follow the indications on the check  
Ensure the vehicle is unlocked when dis-  
connecting the 12-volt battery, otherwise  
the anti-theft alarm will trigger.  
list and always bear in mind the general  
safety measures.  
–
Never perform works in the vicinity of  
Preparing the vehicle for work in  
the front compartment  
heating elements, water boilers or unpro-  
tected ꢂames.  
●
Always have a ꢀre extinguisher close-by,  
Before performing works in the front compart-  
ment, always perform the following operations  
ensuring it is operational and had been  
checked.  
in the stated order ›››  
:
284  
Fluidsandconsumables
Before opening the bonnet, make sure that the  
windscreen wiper arms are in place against the  
windscreen.  
Opening and closing the front bon-  
net  
NOTICE  
To avoid damage to the bonnet and to the  
windscreen wiper arms, only open it when  
the windscreen wipers are in place against  
the windscreen.  
●
Open the door and pull the lever that is un-  
derneath the instrument panel ››› Fig. 189  
1
.
●
To lift the bonnet, press towards the left on  
the lever located under the bonnet, in the cen-  
Fluids and consumables  
2
tre ››› Fig. 190  
. The fastening hooks are  
unlocked.  
Introduction  
●
The bonnet can be opened. Release the  
All ꢀuids and consumables, such as engine  
coolant or vehicle batteries, are subject to  
continuous development. For this reason,  
whenever a ꢀuid or consumable needs to be  
replaced, please contact a specialist workshop.  
bonnet stay and secure it in the ꢁxture de-  
signed for this in the bonnet.  
Fig. 189 Release lever in the driver's  
footwell area.  
Closing the front bonnet  
●
●
Slightly lift the bonnet.  
CUPRA dealers always promptly receive infor-  
mation about any modiꢁcations.  
Release the bonnet stay and replace it in its  
support.  
●
At a height of approximately 20 cm let it fall  
WARNING  
so it locks.  
If unsuitable ꢂuids and consumables are used  
or used improperly, accidents, injuries, burns  
and severe poisoning can occur.  
If the bonnet does not close, do not press  
downwards. Open it again and let it fall as men-  
tioned above.  
●
Only store operating ꢂuids in their original  
containers, tightly closed.  
WARNING  
●
Never store operating ꢂuids in empty food  
Fig. 190 Lever under the bonnet.  
cans, bottles or other empty containers, as  
they could be ingested by somebody.  
Make sure that the bonnet is properly closed.  
If it opens when driving, it can cause an acci-  
dent.  
Open the front bonnet  
●
Keep all ꢂuids and consumables out of  
The front bonnet is released from inside.  
reach of children.  
285  
Checking and reꢀlling levels  
ised workshop to perform all the works. To do  
so, CUPRA recommends going to a specialised  
CUPRA dealer or any SEAT dealership.  
Coolant speciꢀcations  
●
Always read and observe the information  
and warnings given on containers of operat-  
ing ꢂuids.  
The factory ꢁtted motor cooling system is ꢁlled  
with a mixture of specially treated water and  
at least 40% coolant additive G12evo (TL-VW  
774 L).  
●
When using products that emit harmful va-  
In the problems and solutions section at the  
end of this chapter can be found information  
on the warning and control lights that may light  
pours, always work outdoors or in a well-ven-  
tilated area.  
Get information from a specialist workshop  
about which coolant is suitable for your vehi-  
cle. To do so, CUPRA recommends going to a  
specialised CUPRA dealer or any SEAT dealer-  
ship.  
up ››› page 289.  
NOTICE  
WARNING  
Use only appropriate operating ꢂuids. Never  
confuse operating ꢂuids. This could result in  
serious malfunctions and motor damage!  
Engine coolant is toxic!  
●
Only store coolant in its original container,  
To protect the engine cooling system, the ad-  
ditive percentage should always be at least  
40%. If more antifreeze protection is required  
for climatic reasons, the additive proportion  
can be increased. However, it should only be  
increased up to a maximum of 55 %, otherwise  
the antifreeze protection would be reduced  
and the cooling eꢂect would be impaired.  
tightly closed and in a safe place.  
●
Never store motor coolant in empty food  
For the sake of the environment  
cans, bottles or other empty containers, as it  
could be ingested by another person.  
Leakages of operating ꢂuids can contami-  
nate the environment. If any operating ꢂuid  
leaks, collect it in an appropriate container  
and dispose of it properly and in an environ-  
mentally friendly manner.  
●
Always keep motor coolant out of reach of  
children.  
●
Ensure that the coolant ꢂuid additive per-  
The G12evo (TL-VW 774 L) can be recognised  
by its lilac colouring. This mixture of water  
and additive not only provides antifreeze pro-  
tection down to -25°C (-13°F), but also pro-  
tects the light alloy parts of the cooling system  
against corrosion, prevents limescale build-up  
and considerably raises the boiling point of the  
coolant.  
centage is correct, taking into account the  
lowest ambient temperature expected in the  
location where the vehicle is to be used.  
Cooling system  
●
When the outside temperature is very low,  
the coolant could freeze and the vehicle  
could be immobilised. In this case, the heat-  
ing would not work either and inadequately  
dressed passengers could die of cold.  
Introduction  
Only carry out work on the motor cooling sys-  
tem yourself if you are familiar with the neces-  
sary operations and the generally applicable  
safety measures, and if you have the appro-  
priate tools, equipment and operating ꢀuids.  
Works performed inadequately could lead to  
serious injuries . In this case, seek a special-  
When topping up the coolant, a mixture of  
distilled water and at least 40% of the appro-  
priate coolant additive should be used for opti-  
mum corrosion protection ››› page 287.  
For the sake of the environment  
Coolants and additives can contaminate the  
environment. If any operating ꢂuid leaks out,  
collect it and dispose of it properly and in an  
environmentally friendly manner.  
286  
Coolingsystem
For the sake of the environment  
WARNING  
If the vehicle’s cooling system does not have  
suꢁicient antifreeze protection, the electric  
drive system could fail and this could result in  
serious injury.  
Motor coolant and its additives can pollute  
the environment. If any operating ꢂuid leaks  
out, collect it and dispose of it properly and  
in an environmentally friendly manner.  
●
Ensure that the coolant ꢂuid additive per-  
centage is correct, taking into account the  
lowest ambient temperature expected in the  
location where the vehicle is to be used.  
Check and reꢀll the coolant  
●
When the outside temperature is very low,  
Fig. 192 Front compartment: coolant  
expansion tank cap.  
the coolant could freeze and the vehicle  
could be immobilised. In this case, the heat-  
ing would not work either and inadequately  
dressed passengers could die of cold.  
Previous steps  
●
●
Park the vehicle on a ꢁrm, ꢀat surface.  
Wait for the electric drive system to cool  
NOTICE  
down ›››  
.
Never mix the original additives for the  
G12evo coolant (TL-VW 774 L) with motor  
coolant ꢂuid not authorised by CUPRA.  
●
Open the front bonnet ›››  
in Working in  
Fig. 191 In the front compartment:  
the front compartment on page 282.  
●
marking on coolant expansion tank.  
If the ꢂuid in the expansion tank does not  
●
The motor coolant expansion tank can be  
have a pink colour (resulting from mixing the  
lilac additive with distilled water), but is, for  
example, brown, the suitable coolant may  
have been mixed with another unsuitable  
one. The coolant must be changed as soon as  
possible if this is the case! Otherwise serious  
malfunctions or damage to the electric drive  
system and the cooling system could occur!  
recognised by the symbol on the cap  
››› Fig. 192  
Check the level  
When the vehicle is delivered (new vehicles),  
the coolant may be above the marked area.  
This is normal. It is not necessary to suck the  
coolant out.  
287  
Checking and reꢀlling levels  
●
●
When the electric drive system is cold, check  
If there is still some coolant left in the ex-  
●
Before opening the front bonnet, please  
the coolant level using the side marking on the  
expansion tank ››› Fig. 191. The coolant level  
should be between the marks.  
pansion tank, top up with coolant up to the  
tank’s upper mark and check the level the next  
day. If the level drops again, go to a workshop  
and request a check of the cooling system.  
note the following:  
–
–
Apply the electronic parking brake.  
Always keep children away from the front  
●
(
If the level is below the minimum level mark  
) on the tank, top up with coolant. When  
compartment and never leave them unat-  
tended.  
●
The coolant level must be between the  
the motor is warm, the coolant level may be  
slightly above the upper mark.  
marks on the expansion tank ››› Fig. 191.  
●
When the electric drive system is hot, its  
Never exceed the top edge of the marked  
cooling system is under pressure. Do not  
open the expansion tank cap, hot coolant  
may splash out and cause severe burns and  
other injuries.  
area ›››  
.
Topping up the ꢂuid  
●
Screw the cap on tightly.  
When the motor coolant level is too low, the  
coolant warning light comes on. In this case,  
immediately seek assistance from specialist  
personnel.  
●
If engine coolant with the recommended  
–
Turn the cap slowly and very carefully an-  
speciꢁcations is not available in an emergency,  
do not use any other coolant additive! In this  
ticlockwise while pressing it down slightly.  
–
Always protect your face, hands and arms  
case, top up with distilled water ››› only.  
Next, ensure that the recommended additive  
is topped up as soon as possible in the correct  
proportion ››› page 286.  
from the hot coolant and steam with a  
large thick cloth.  
If the coolant level is too low and there is no  
workshop nearby, note the following:  
●
Always protect your face, hands and arms  
NOTICE  
from hot coolant or steam by placing a suita-  
ble cloth over the cap of the motor coolant  
expansion tank.  
WARNING  
Only use distilled water! Other types of wa-  
ter contain chemical substances that could  
cause signiꢀcant corrosion damage. If you  
have added non-distilled water, have all of  
the drive system’s coolant changed immedi-  
ately by a specialist workshop.  
Steam and hot motor coolant can cause se-  
vere burns.  
●
Carefully unscrew the cap ›››  
.
●
Only top up with fresh coolant according to  
●
Never open the front bonnet if you see  
or hear steam or coolant escaping from the  
front compartment. Always wait until you can  
no longer see or hear steam or coolant es-  
caping. Touching hot parts can result in skin  
burns.  
CUPRA speciꢁcations ››› page 286.  
●
Only top up with coolant if there is still some  
●
When topping up the, do not ꢀll over the  
coolant left in the expansion tank; otherwise  
the drive system could be damaged! If you do  
not see any coolant in the expansion tank, do  
not continue driving and seek specialist assis-  
tance.  
upper edge of the marked area ››› Fig. 191.  
Otherwise, when the temperature rises the  
excess ꢂuid will be expelled from the motor  
cooling system and could cause damage.  
●
If the system leaks a lot of coolant, only  
reꢀll once the drive system has cooled down  
completely. If there is a signiꢀcant loss of  
288  
Brakeꢂuid
If the warning lamp does not go out even  
though the motor coolant level is correct, do  
not continue to drive or leave the motor run-  
ning.  
Checking the brake ꢂuid level  
coolant, there may be leaks in the cooling  
system. Immediately go to a specialist work-  
shop to have the system checked. This could  
damage the drive system!  
The brake ꢀuid level must be between the  
and  
markings.  
However, if the brake ꢀuid level goes down no-  
ticeably in a short time, or drops below the  
mark, there may be a leak in the brake sys-  
tem. Seek specialist assistance. A warning light  
on the instrument panel display monitors the  
brake ꢀuid level.  
●
Do not add coolant if the expansion tank  
●
Seek specialist assistance.  
is completely empty! Air may have got into  
the cooling system. Do not continue driving  
and seek assistance from specialist person-  
nel. This could damage the drive system!  
together with : Failure in the cool-  
ing system of the high-voltage system  
The warning lamps ꢀash red.  
●
When changing the operating ꢂuids, make  
sure that you pour the correct ꢂuids into the  
correct ꢀller necks. Using the wrong operat-  
ing ꢂuids can lead to serious malfunctions  
and damage to the electric drive system.  
Stop the vehicle immediately!  
Brake ꢂuid level  
●
●
Switch oꢂ the drive system.  
Seek specialist assistance.  
The control lamp lights up red.  
Brake ꢀuid level is too low.  
●
●
●
Stop driving!  
Troubleshooting  
Brake ꢂuid  
Check the brake ꢀuid level.  
If the brake ꢀuid level is too low, seek special-  
Motor coolant  
Check and reꢀll the brake ꢂuid  
ist assistance.  
The warning lamp ꢀashes red.  
The motor coolant temperature is too high or  
the motor coolant level is too low.  
Changing brake ꢂuid  
We recommend that you have the brake ꢀuid  
changed by a Technical Service.  
●
Stop driving! Stop the vehicle at the next  
opportunity and in a safe place.  
●
●
Switch oꢂ the drive system.  
Wait for the electric drive system to cool  
down.  
●
Check the coolant level in the coolant ex-  
pansion tank ››› page 287.  
Fig. 193 Front compartment: brake ꢀuid  
reservoir cap.  
289  
Checking and reꢀlling levels  
Note  
There is a sieve in the ꢁller neck of the washer  
ꢀuid tank. When ꢁlling the tank, this sieve re-  
tains large dirt particles so that they do not  
reach the nozzles. Do not remove the sieve  
except for cleaning. If the sieve is damaged or  
not ꢁtted, these dirt particles could enter the  
system during ꢁlling and clog the windscreen  
WARNING  
If the brake ꢂuid level is low or unsuitable/old  
brake ꢂuid is used, the brake system may fail  
or braking power may be reduced.  
Brake ꢂuid is an environmental pollutant.  
Collect any spilt service ꢂuids and allow a  
professional to dispose of them.  
●
Check the brake system and the brake ꢂuid  
level regularly!  
Windscreen washer reser- washer nozzles.  
●
When the brake ꢂuid is used and brakes are  
subjected to extreme braking forces, bub-  
bles of vapour form in the brake system.  
These bubbles can signiꢀcantly reduce brak-  
ing power, notably increasing braking dis-  
tance, and could result in the total failure of  
the brake system.  
●
Open the front bonnet ›››  
on page 282.  
voir  
●
The windscreen washer reservoir is marked  
with the symbol on the cap.  
Checking the level of the window  
washer tank and reꢀlling it  
●
Check if there is enough ꢀuid in the tank.  
Plain water is not enough to clean the wind-  
screen and headlights. We recommend that  
you always add a product to the windscreen  
washer ꢀuid.  
●
Be sure to always use the correct brake  
ꢂuid. Only use brake ꢂuid that expressly  
meets the VW 501 14 standard.  
●
You can buy VW 501 14 standard brake ꢂuid  
at a specialised CUPRA service or at a SEAT  
Oꢁicial Service. If none is available, use only  
high-quality brake ꢂuid that meets DIN ISO  
4925 CLASS 4 standards, or USA Standards  
FMVSS 116 DOT 4.  
Recommended windscreen wipers  
●
For the hottest seasons we recommend  
summer G 052 184 A1 for clear glass. Propor-  
tions of the mixture in the washer ꢀuid tank:  
1:100 (1 part concentrate per 100 parts water).  
●
●
The replacement brake ꢂuid must be new.  
Brake ꢂuid should be stored in the closed  
●
All year round, G 052 164 A2 for clear glass.  
Fig. 194 In the front compartment: blue  
cap of the windscreen washer tank.  
original container in a safe place out of reach  
of children. Risk of poisoning!  
Approximate proportion of the winter mixture,  
up to -18°C (0°F): 1:2 (1 part concentrate per  
2 parts water); otherwise, a 1:4 proportion of  
mixture in the washer ꢀuid tank.  
Check the water level in the windscreen  
washer reservoir regularly and top up as re-  
quired.  
NOTICE  
Brake ꢂuid should not come into contact  
with the vehicle paintwork, as it is abrasive.  
The capacity of the windscreen washer tank is  
approximately 3 litres.  
The window washer tank contains liquid deter-  
gent for the windscreen and rear window.  
290  
12-volt battery
The battery must not be opened! Never try to  
change the ꢀuid level of the battery. Otherwise  
explosive gas is released from the battery that  
could cause an explosion.  
NOTICE  
NOTICE  
●
If the water from the windscreen washer  
does not contain enough anti-freeze, it may  
freeze on the windscreen and rear window,  
reducing forward and rear visibility.  
Do not mix cleaning products recommen-  
ded by CUPRA with other products. This  
could lead to ꢂocculation and may block the  
windscreen washer jets.  
Battery warning indications  
●
When topping up service ꢂuids, make ab-  
●
In winter, ensure the windscreen washer  
contains enough anti-freeze.  
Wear protective goggles.  
solutely certain that you ꢀll the ꢂuids into  
the correct reservoirs. Using the wrong ꢂuids  
could cause serious malfunctions.  
●
In cold conditions, you should not use the  
Battery acid is extremely corrosive. Wear  
protective gloves and eye protection.  
Rinse any splashes of electrolyte with  
plenty of water.  
windscreen wiper system unless you have  
warmed the windscreen with the ventilation  
system. The antifreeze could freeze on the  
windscreen and reduce visibility.  
●
Lack of window washer ꢂuid causes the  
view through the windscreen to be obscured.  
Fires, sparks, open ꢀames and smoking  
are prohibited.  
12-volt battery  
NOTICE  
The battery should only be charged in a  
well-ventilated zone. Risk of explosion!  
Never mix an unsuitable antifreeze or other  
similar additives with the windscreen washer  
water. A greasy layer may be formed on the  
windscreen which will impair visibility.  
Introduction  
Keep children away from acid and the bat-  
tery.  
The 12 volt battery is located in the front com-  
partment, under the bonnet. It is part of the  
electrical system and, in the event of a fail-  
ure of the high-voltage battery, it ensures that  
power is supplied to vehicle systems of rele-  
vance to safety. The 12 volt battery is checked  
and, if necessary, replaced as part of mainte-  
nance work.  
●
Use clean water with a window cleaner rec-  
Always follow the instruction manual.  
ommended by CUPRA.  
●
If necessary, add a suitable antifreeze to  
the water in the reservoir.  
WARNING  
Working on the 12-volt battery and electrical  
system can cause severe burns, ꢀre and elec-  
tric shock. Always read and observe the fol-  
lowing warnings and safety precautions be-  
fore working on the battery:  
All work on batteries requires specialist knowl-  
edge. Please refer to a specialised CUPRA  
Service, SEAT Oꢂicial Service or a workshop  
specialising in batteries: risk of burns or ex-  
ploding battery!  
●
Before working on the 12-volt battery,  
switch oꢁ the ignition and all electrical con-  
sumers and disconnect the negative cable  
from this battery.  
291  
Checking and reꢀlling levels  
NOTICE  
Charging, replacing, disconnecting  
and connecting the 12-volt battery  
●
Always keep children away from the 12-volt  
battery electrolyte and the battery itself.  
If the vehicle is not to be used for a long pe-  
riod of time, protect the 12-volt battery from  
frost.  
●
Always wear eye protection and protective  
If you suspect that the 12-volt battery is dam-  
aged or defective, have it checked by a quali-  
ꢁed specialist workshop.  
gloves.  
●
The battery electrolyte is very corrosive It  
●
The battery may freeze and, as a result,  
suꢁer irreparable damage.  
can cause skin burns and blindness. When  
handling the 12-volt battery, protect your  
hands, arms and face in particular from acid  
splashes  
Charging the 12-volt battery  
Note  
Contact a specialist workshop for charging the  
12-volt battery, as the battery model ꢁtted in  
the vehicle in the factory uses a technology  
●
Do not smoke while working and never  
After switching on the drive system with a  
deeply discharged or newly replaced 12-volt  
battery, or after a jump start, some system  
settings (time, date, personalised comfort  
settings and programs) may be incorrectly  
set or deleted. Check and correct these set-  
tings when the battery is suꢁiciently charged.  
work in the vicinity of naked ꢂames or sparks.  
●
Avoid sparks caused by electrostatic dis-  
that requires limited voltage charging ›››  
.
charges, just like when handling electric ca-  
bles and devices.  
To do so, CUPRA recommends going to a spe-  
cialised CUPRA dealer or any SEAT dealership.  
●
●
Never short the battery terminals.  
Replacing the 12-volt battery  
Never use damaged 12-volt batteries. They  
could explode. If the 12-volt battery is dam-  
aged, replace it immediately.  
The 12-volt vehicle battery has been designed  
to suit its location and has special safety fea-  
tures. If a 12 volt battery needs to be replaced,  
the replacement battery must be installed by  
a qualiꢁed technician. CUPRA recommends  
that you visit a CUPRA dealer. Component in-  
formation regarding size, maintenance, power  
and safety characteristics to be met can be ob-  
tained from a qualiꢁed technician, who should  
have the necessary documentation and tech-  
nical equipment. CUPRA recommends visiting  
a specialised CUPRA dealer or any SEAT deal-  
ership.  
Check the electrolyte level  
●
Never use a frozen 12 volt battery. When  
the battery is discharged, it may freeze at  
temperatures close to 0°C (+32 °F). If the 12-  
volt battery is frozen, replace it immediately.  
The 12-volt battery is located in the front com-  
partment, under the bonnet.  
The electrolyte level of the 12-volt battery can-  
not be checked, as the battery sight glass is  
covered by the vehicle's main fuse box.  
NOTICE  
Always have the battery electrolyte level  
checked by a qualiꢁed specialist workshop.  
Do not expose the 12-volt battery to direct  
sunlight for a prolonged period of time.  
●
Ultraviolet rays can damage the battery  
casing.  
The degassing hole of the 12 volt battery must  
always be on side of the negative pole. The  
degassing hole on the side of the positive pole  
must always be sealed.  
292  
12-volt battery
Only use maintenance-free 12 volt batteries  
that comply with the TL 825 06 and VW 7 50 73  
standards. These standards must be dated Oc-  
tober 2014 or later.  
After connecting the 12 volt battery and  
switching on the ignition, several control lamps  
may light up. These lamps go out after a short  
distance at a speed of approx. 15 to 20 km/h  
(10 to 12 mph). If the warning lights do not go  
out, visit a specialist workshop and have the  
vehicle checked.  
is left parked with the ignition or the side- or  
parking light switched on for a long period of  
time.  
Factors causing the 12-volt battery to dis-  
charge  
The 12 volt battery must always be replaced  
by a qualiꢁed technician, as the vehicle's elec-  
tronic system must also be adjusted as part  
of the replacement. In addition, the battery  
parameters relating to operational safety can  
only be determined with the original battery.  
Only a qualiꢁed technician has both the right  
technology to make the adjustment and the  
correct replacement batteries.  
●
Use of electric consumers while the drive  
If the 12-volt battery has been disconnected  
for a long period of time, it is likely that the  
next service is not correctly indicated or cal-  
culated ››› page 21 . In this case it will be  
necessary to take into account the maximum  
maintenance intervals allowed ››› page 311.  
system is disconnected.  
WARNING  
Attaching the 12-volt battery incorrectly or  
using unsuitable batteries may result in short  
circuits, ꢀre and serious injury.  
The use of unsuitable batteries will invalidate  
the approval.  
Vehicles with a “Keyless Access” system  
●
Use only maintenance-free 12 volt batter-  
››› page 92: If the ignition cannot be switched  
on after connecting the 12 volt battery, lock  
and unlock the vehicle from the outside. Then  
try to switch on the ignition again. If the ignition  
does not work, seek professional assistance.  
ies with an anti-spill system with the same  
properties, speciꢀcations and dimensions as  
the factory-ꢀtted battery.  
Disconnecting the 12-volt battery  
If the 12 volt battery is to be disconnected from  
the vehicle's electrical system, please note the  
following:  
WARNING  
Automatic disconnection of consumers  
●
●
Switch oꢂ all electrical consumers.  
Charging the 12-volt battery creates a highly  
explosive mixture of detonating gases.  
In the event of excessive demand on the  
12 volt battery, the on-board network smart  
management system automatically takes cer-  
tain measures to prevent the battery from dis-  
charging:  
Before disconnecting the battery, unlock the  
vehicle, otherwise the alarm will be triggered.  
●
Only charge the 12-volt battery in a well-  
ventilated place.  
●
First disconnect the negative cable and then  
●
Never charge a 12-volt battery that is fro-  
the positive cable ›››  
.
zen or has thawed. When the battery is dis-  
charged, it may freeze at temperatures close  
to 0°C (+32°F).  
●
If necessary, the power of the most powerful  
Connecting the 12-volt battery  
consumers is limited or, in an emergency, they  
are switched oꢂ completely.  
●
Switch oꢂ all electrical consumers before re-  
●
If the 12-volt battery has frozen, have it re-  
connecting the 12 volt battery.  
placed without fail.  
On-board network management cannot al-  
ways prevent the 12 volt battery from discharg-  
ing. This is the case if, for example, the vehicle  
●
First reconnect the positive cable and then  
the negative one ›››  
.
293  
Checking and reꢀlling levels  
Troubleshooting  
●
●
Contact a specialised workshop.  
●
A short circuit may occur if the wires are  
incorrectly connected to the poles. First con-  
nect the positive cable and then the negative  
one.  
Request a check of the electrical system.  
12 volt battery  
12 volt battery  
The control lamp lights up in RED. The follow-  
ing messages may be displayed:  
The indicator lamp lights up YELLOW. The fol-  
NOTICE  
Error: 12 V battery not charging.  
Stop vehicle safely!  
lowing message is displayed:  
●
Never connect or disconnect the 12-volt  
Error: 12 V battery diagnosis.  
Please visit workshop.  
battery while the drive system is switched on.  
Also, never use a 12-volt battery that does  
not meet the vehicle's battery speciꢀcations.  
The electrical system or certain electronic  
components could be damaged and electri-  
cal malfunctions could occur.  
Error: 12V power supply. Stop  
safely! Manual!  
There is a fault in the 12-volt battery monitor-  
ing system.  
Stop driving! Stop the vehicle at the next  
opportunity and in a safe place. The 12-volt  
battery will not be charged while driving or  
there is a fault in the on-board 12-volt network.  
●
●
Contact a specialised workshop.  
Request a check of the electrical system.  
●
Never connect accessories that supply  
power, such as solar panels or battery charg-  
ers, to the 12-volt socket or cigarette lighter,  
to charge the 12-volt battery. This could  
damage the vehicle's electrical system.  
●
Switch oꢂ any electrical consumers that are  
12 volt battery  
not required.  
The indicator lamp lights up YELLOW. The fol-  
lowing message is displayed:  
●
●
Contact a specialised workshop.  
Request a check of the electrical system.  
12 V battery charge low. Charge  
while driving.  
For the sake of the environment  
12 volt battery  
●
The battery may contain toxic substances,  
The 12-volt battery charges deꢁciently.  
The indicator lamp lights up YELLOW. The fol-  
lowing message is displayed:  
such as sulphuric acid and lead. Dispose of  
the 12 volt battery in accordance with the  
applicable regulations.  
●
Make a short trip to recharge the battery.  
OR:  
Error: 12 V battery. Restart impos-  
sible. Go to the workshop.  
●
Electrolyte can contaminate the environ-  
The diagnosis of the 12 volt battery was cancel-  
led because the vehicle has been restarted, for  
example.  
ment. If any operating ꢂuid leaks out, collect  
it and dispose of it properly.  
There is a fault in the connection between the  
on-board network and the 12-volt battery.  
●
If after parking for a prolonged period of  
If the drive system is switched oꢂ in this situa-  
tion, it cannot be switched on again. If neces-  
sary, use the jump leads ››› page 271 or seek  
assistance from qualiꢁed personnel.  
time (e.g. overnight), the warning lamp is still  
one, go to a specialised workshop and have  
the electrical system checked.  
294  
12-volt battery
12 volt battery  
The indicator lamp lights up YELLOW. The fol-  
lowing message is displayed:  
12 V power supply now limited.  
Drive with caution.  
The 12-volt power supply is limited, maybe be-  
cause the 12 volt battery is discharged or not  
working at full performance, for example due  
to very cold outside temperatures. The 12-volt  
battery can be charged while driving. Until the  
warning disappears, you should drive with care.  
12 volt battery  
The indicator lamp lights up YELLOW. The fol-  
lowing message is displayed:  
Error: 12 V supply. Please visit  
workshop.  
There is a fault in the 12V power supply.  
●
●
Go to a qualiꢁed establishment.  
Have the electrical system checked.  
295  

Related Topics

Popular Owner Manuals