ChFelucikdisnganadndcorenꢀsullminagblelevsels
Before opening the bonnet, make sure that the
windscreen wiper arms are in place against the
windscreen.
Opening and closing the front bon-
net
NOTICE
To avoid damage to the bonnet and to the
windscreen wiper arms, only open it when
the windscreen wipers are in place against
the windscreen.
●
Open the door and pull the lever that is un-
derneath the instrument panel ››› Fig. 189
1
.
●
To lift the bonnet, press towards the left on
the lever located under the bonnet, in the cen-
Fluids and consumables
2
tre ››› Fig. 190
. The fastening hooks are
unlocked.
Introduction
●
The bonnet can be opened. Release the
All ꢁuids and consumables, such as engine
coolant or vehicle batteries, are subject to
continuous development. For this reason,
whenever a ꢁuid or consumable needs to be
replaced, please contact a specialist workshop.
bonnet stay and secure it in the ꢀxture de-
signed for this in the bonnet.
Fig. 189 Release lever in the driver's
footwell area.
Closing the front bonnet
●
●
Slightly lift the bonnet.
CUPRA dealers always promptly receive infor-
mation about any modiꢀcations.
Release the bonnet stay and replace it in its
support.
●
At a height of approximately 20 cm let it fall
WARNING
so it locks.
If unsuitable ꢁuids and consumables are used
or used improperly, accidents, injuries, burns
and severe poisoning can occur.
If the bonnet does not close, do not press
downwards. Open it again and let it fall as men-
tioned above.
●
Only store operating ꢁuids in their original
containers, tightly closed.
WARNING
●
Never store operating ꢁuids in empty food
Fig. 190 Lever under the bonnet.
cans, bottles or other empty containers, as
they could be ingested by somebody.
Make sure that the bonnet is properly closed.
If it opens when driving, it can cause an acci-
dent.
Open the front bonnet
●
Keep all ꢁuids and consumables out of
The front bonnet is released from inside.
reach of children.
285