2002-2008 Cupra Born SUV Lights User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lights for Your Cupra Born SUV First Generation (2002-2008)

Vehiclelighting  
When the function is activated, the corre-  
sponding symbol lights up. To deactivate it, you  
will need to press on the symbol again.  
Lighting and visibility buttons  
Lights  
Vehicle lighting  
Turn the fog lights on or oꢁ. In addition,  
the control lamp on the instrument clus-  
Control lamps  
ter lights up  
.
Turning the rear fog lights on or oꢁ. In ad-  
dition, the control lamp on the instrument  
Lights up yellow  
There is a total or partial failure of the  
exterior lighting.  
cluster lights up  
.
Switching the windscreen demisting  
Lights up yellow  
Rear fog light on.  
function on and oꢁ ››› page 131.  
Switching the rear window heating on and  
Fig. 103 Instrument panel: light panel.  
oꢁ ››› page 131.  
The driver is personally responsible for the  
correct use and adjustment of the lights in all  
situations.  
By pressing the button  
tween (the corresponding indicator lights up):  
you can select be-  
Lights up green  
Left or right turn signal. The control  
lamp ꢀashes twice as fast when a  
turn signal is faulty.  
Switching on the dipped beam head-  
lights.  
Side lights  
Hazard warning lights on ››› page 65.  
Automatic control of dipped beam and  
daytime running light.  
When the side light  
is switched on, the side  
Lights up blue Main beam on or ꢀasher  
activated ››› page 115.  
lights in both headlights, certain areas of the  
rear light clusters, the number plate light and  
the button lights on the instrument cluster turn  
on. The automatic dipped beam activates as of  
a speed of approx. 10 km/h (6 mph).  
Switching on the side lights. The auto-  
matic headlight control  
activates at  
over a speed of approx. 10 km/h (6 mph).  
Lights oꢁ. Automatic headlight control  
activates at over a speed of approx.  
10 km/h (6 mph) or after travelling 100 m  
(0.062 mi).  
Lights up blue  
The Light Assist system is on  
››› page 116.  
Automatic headlight control  
When the automatic dipped beam is switched  
on, the vehicle's lighting and the lighting of the  
instruments and controls turn on and oꢁ under  
the following conditions:  
Additionally, the following light functions can  
be activated by pressing on the corresponding  
symbol.  
113  
Lights  
●
●
The light sensor has detected darkness.  
The wiper has been on for some time.  
Daytime running lights  
WARNING  
Daytime running lights can increase the ve-  
hicle’s visibility when driving in daylight and  
they turn on automatically when the ignition  
is switched on (if brightness is detected).  
The side lights or daytime running lights are  
not bright enough to illuminate the road  
ahead and to ensure that other road users  
are able to see you.  
When the lights are on, the control lamp lights  
up in yellow.  
The automatic dipped beam is only an auxili-  
ary function and cannot always identify all sit-  
uations that may arise during driving with suꢁi-  
cient precision.  
●
Always use your dipped beam head lights if  
it is raining or if visibility is poor.  
Audible warnings to advise the driver that  
the lights have not been switched oꢀ  
●
Never drive with daytime lights if the road  
is not well lit due to weather or lighting con-  
ditions.  
If the ignition is not connected and the driver  
door is open, an audible warning signal is heard  
in the following cases: this will remind you to  
turn the light oꢁ.  
If the vehicle has the appropriate equipment,  
the vehicle settings menu of the infotainment  
system can be used to set the moment that  
the dipped beam automatically switches on  
Note  
››› page 35.  
●
When the parking light is on ››› page 115.  
●
The legal requirements regarding the use  
●
When the lamp  
or is on.  
of vehicle lights in each country must be ob-  
served.  
Cornering light function  
If the exit lighting is switched on (“Coming  
Home” function), when you leave the vehicle  
there will be no audio warning to warn you that  
the lights are still on.  
The cornering light function is an additional  
function to the dipped beam headlights to im-  
prove lighting of the side of the road when tak-  
ing a sharp turn at low speed.  
●
The dipped beam headlights will only work  
with the ignition on. The side lights come on  
automatically when the ignition is turned oꢀ.  
●
The rear fog light can dazzle drivers behind  
WARNING  
When the dipped beam is on, a static corner-  
ing light comes on when driving at speeds be-  
low about 40 km/h (25 mph) or on very tight  
bends.  
you. You should use the rear fog light only  
when visibility is very poor.  
If the road is not well lit and other road users  
cannot see the vehicle well enough or at all,  
accidents may occur.  
●
When the lights are oꢀ or in position  
or and the fog lights are switched on, the  
dipped beam is also switched on regardless of  
the ambient brightness.  
●
The automatic dipped beam control (  
)
●
If the steering wheel is turned or the turn sig-  
only switches on the dipped beam when  
there are no changes in brightness, and not,  
for example when it is foggy.  
nal is switched on, the corresponding fog light  
comes on progressively. After the turn, the  
cornering light function is gradually switched  
oꢁ.  
●
When engaging reverse gear, both fog lights  
turn on at the same time.  
114  
Vehiclelighting  
Convenience turn signals  
Automatically switching oꢀ the side light or  
parking light  
Turn signal and main beam lever  
When the ignition is switched on, move the  
lever as far as possible upwards or downwards  
and release the lever. The turn signal will ꢀash  
three times.  
If the vehicle detects that the 12 volt battery  
is low on charge, it switches oꢁ the side light  
or parking light, but only after 2 hours of op-  
eration, so that the drive system can still be  
switched on.  
To switch oꢁ the convenience turn signal early,  
immediately move the lever in the opposite di-  
rection until you feel resistance and release it.  
If there is insuꢁicient battery capacity for the  
side light or parking light to remain on for 2  
hours, the 12 volt battery may discharge so  
much that it is impossible to switch on the drive  
system.  
The comfort turn signals can be activated and  
deactivated in the infotainment system, in the  
vehicle settings menu ››› page 35.  
Fig. 104 Turn signal and main beam lever  
(depending on the version).  
Parking light  
WARNING  
The parking lights will only work with the igni-  
tion oꢁ. If said light is on, an audible warning  
will sound while the driver door is open.  
More the lever to the required position:  
Improper or lack of use of the turn signals,  
or forgetting to deactivate them can confuse  
other road users. This could result in a seri-  
ous accident.  
1
2
3
Right turn light or right-hand parking light  
(ignition switched oꢁ).  
●
●
Switch the ignition oꢁ.  
Left turn light or left-hand parking light (ig-  
nition switched oꢁ).  
Move the turn signal lever up or down.  
●
Always give warning when you are going to  
When the parking light is switched on, the  
front side light and the tail light on the corre-  
sponding side of the vehicle turn on.  
change lane, overtake or when turning, acti-  
vating the turn signal in good time.  
Turning on the main beam. The control  
lamp lights up on the instrument clus-  
ter.  
●
As soon as you have ꢁnished changing lane,  
overtaking or turning, switch the turn signal  
oꢀ.  
Parking light on both sides  
4
The headlight ꢀasher turns on when the  
lever is pulled. The control lamp lights  
up on the instrument cluster.  
●
●
●
Switch the ignition oꢁ.  
Press the button to select  
Lock the vehicle from the outside.  
.
WARNING  
Place the lever in rest position to turn oꢁ the  
corresponding function.  
Incorrect use of the headlights may cause  
accidents and serious injury, as the main  
beam may distract or dazzle other drivers.  
In doing so, only the side lights of both head-  
lights light up, and additionally the tail lights will  
do so partially.  
115  
Lights  
tion, the main beam assist detects illuminated  
areas and disconnects the main beam head-  
light when passing, e.g. by populated areas.  
the main beam on manually. Pull the turn sig-  
nal and main beam lever back to switch oꢁ the  
main beam manually, if necessary.  
Note  
●
When you turn the ignition oꢀ without hav-  
ing turned the turn signals oꢀ, an acoustic  
signal sounds while the driver door is open.  
This is intended as a reminder to switch oꢀ  
the turn signal, unless you wish to leave the  
parking light on.  
●
OR: switch oꢁ the ignition.  
Within its limitations, the assist system auto-  
matically connects or disconnects the main  
beam headlight depending on the environ-  
mental and traꢁic conditions, as well as the  
System limitations  
In the following cases, the main beam head-  
light must be switched oꢁ manually because  
the main beam assist will not disconnect it on  
time or disconnect it at all:  
speed ›››  
.
●
If the convenience turn signals are oper-  
ating (three ꢂashes) and the other conven-  
ience turn signals are switched on, the active  
part stops ꢂashing and only ꢂashes once in  
the new part selected.  
Switching on the main beam assist  
●
On roads with insuꢁicient lighting with very  
●
Switch on the ignition and select mode  
reꢀective signs  
on the headlight control ››› Fig. 103.  
●
The turn signal only works when the igni-  
tion is switched on. The hazard warning lights  
also work when the ignition is switched oꢀ.  
●
If road users are insuꢁiciently lit up, e.g. pe-  
●
From the base position, press the turn sig-  
destrians or cyclists.  
nal and main beam headlights lever forwards  
3
●
On closed curves, when the traꢁic in the  
››› Fig. 104  
.
●
The main beam headlights can only be  
opposite direction is partially hidden, on pro-  
nounced slopes or inclinations.  
switched on if the dipped beam headlights  
are already on.  
When the main beam assist is switched on,  
the control lamp on the instrument cluster  
screen turns on. When the main beam is on,  
the blue main beam control lamp on the  
instrument cluster switches on.  
●
●
In cold or damp weather conditions, the  
On roads with traꢁic in the opposite direction  
headlights, tail lights and turn signals may  
mist up inside temporarily. This is normal and  
in no way eꢀects the useful life of the vehicle  
lighting system.  
and with a central reservation barrier where  
the driver can see over it e.g. lorry drivers.  
●
●
●
In the event of fog, snow or heavy rain  
In the event of dust or sand storms  
Switching the main beam assist oꢀ  
●
The parking light does not activate auto-  
●
Switching oꢁ mode  
control ››› Fig. 103.  
EITHER: if main beam assist is on, pull the  
turn signal light and main beam headlights  
on the headlight  
If the windscreen is damaged in the camera's  
matically if the left- or right-hand turn signal  
is left on and the ignition is disconnected.  
ꢂeld of vision.  
●
●
If the camera's ꢂeld of vision is misted up,  
dirty or covered by a sticker, snow or ice.  
Main beam assist (Light Assist)  
4
lever back ››› Fig. 104  
OR: if the main beam assistant is on, but the  
main beam does not turn on, press the turn  
signal and main beam lever forwards to turn  
.
●
If the camera is damaged or if the power  
●
supply has been cut oꢁ.  
The main beam assist automatically prevents  
glare from vehicles moving in the opposite di-  
rection or ahead in the same direction. In addi-  
116  
Vehiclelighting  
●
OR: press the light control as many times as  
WARNING  
Note  
necessary until the instrument cluster displays  
the setting  
The convenience features of the main beam  
assist should not encourage the taking of  
risks. The system is not a replacement for  
driver concentration.  
●
The headlight ꢂasher can be turned on and  
oꢀ manually at any time with the turn signal  
.
●
OR: switch on the ignition.  
and main beam lever ››› page 115.  
If there are objects that radiate light in the  
camera's area of inꢂuence, e.g. a portable  
navigation system, this may aꢀect the opera-  
tion of the main beam assist system.  
●
Turning on the “Leaving home” light  
●
You are always in control of the main beam  
and adapting it to the light, visibility and traf-  
ꢁc conditions.  
●
Switch the ignition oꢁ.  
The “Leaving home” light comes on if the au-  
tomatic headlight control is switched on  
●
It is possible that the main beam headlight  
control does not recognise all driving situa-  
tions and is limited under certain circumstan-  
ces.  
and the light sensor detects darkness.  
“Coming home” and “Leav-  
ing home” function (exterior ori-  
entation lighting)  
The lights-oꢁ delay countdown starts when  
the last door or rear lid of the vehicle is closed.  
●
When the ꢁeld of vision of the camera is  
dirty, covered or damaged, operation of the  
main beam control may be aꢀected. This also  
applies when changes are made to the vehi-  
cle lighting system, for example, if additional  
headlights are installed.  
Turning oꢀ the “Leaving home” light  
The “Coming home” and “Leaving home”  
function lights up the vehicle’s immediate sur-  
roundings when getting into and out of it in the  
dark.  
●
It switches oꢁ automatically after the set  
lights-oꢁ delay time has elapsed.  
●
EITHER: it is automatically deactivated if, 30  
seconds after the function has been activated,  
any vehicle door or the rear lid is still open.  
This light is automatically controlled by a light  
sensor.  
NOTICE  
●
To avoid aꢀecting the operation of the sys-  
tem, take the following points into considera-  
tion:  
OR: press the light control as many times as  
Turning on the “Coming home” light  
necessary until the instrument cluster displays  
the setting  
.
●
Unlocks the vehicle (if the automatic dipped  
●
Clean the ꢁeld of vision of the camera reg-  
●
OR: switch on the ignition.  
beam function is switched on and the light  
ularly and make sure it is free of snow and ice.  
sensor detects darkness).  
●
era.  
Do not cover the ꢁeld of vision of the cam-  
“Coming home” and “Leaving home” set-  
tings  
Turning oꢀ the “Coming home” light  
●
Check that the windscreen is not damaged  
●
It turns oꢁ automatically once the lights oꢁ  
The duration of the lights-oꢁ delay can be set  
in the vehicle settings menu of the infotain-  
ment system, where the function can also be  
in the area of the ꢁeld of vision of the cam-  
era.  
delay time has elapsed.  
●
OR: lock the vehicle.  
activated and deactivated ››› page 35.  
117  
Lights  
Depending on the equipment, the behaviour  
of the exterior lighting can be adjusted in the  
infotainment system, under vehicle settings.  
Interior and reading lights  
Interior lights  
Instrument cluster and control  
lighting  
In the Comfort light settingsmenu you  
can choose between the following two var-  
iants:  
The instrument and control lighting intensity,  
as well as the basic lighting intensity of the  
Head-up-Display, can be set in the vehicle  
settings menu of the infotainment system  
●
Classic entry and exit lighting:  
The side lights and headlights switch on and  
oꢁ at the same time.  
››› page 35.  
The set intensity automatically adapts to  
changes in ambient brightness in the vehicle.  
●
Dynamic entry and exit lighting:  
The indicator lights, headlights and rear light  
clusters turn on and oꢁ dynamically and, if ap-  
plicable, with animation.  
Fig. 105 Detail of headliner: front interior  
lighting.  
When the automatic dipped beam light  
is turned on, a sensor automatically turns the  
dipped beam light on or oꢁ, as well as the in-  
strument and control lighting, depending on  
the ambient brightness.  
Dynamic headlight range control  
Turning the interior lights on or oꢁ.  
The headlight range is automatically adjusted  
according to the vehicle load status when they  
are switched on.  
Door contact connection. The interior  
lights come on automatically when you  
unlock the vehicle, open a door or dis-  
connect the ignition. The light goes out  
a few seconds after closing all the doors,  
when locking the vehicle or connecting  
the ignition.  
WARNING  
If the dynamic headlight range control fails  
or does not work properly, the headlights  
could dazzle and distract other road users.  
This could cause accidents and lead to seri-  
ous injuries.  
Reading light  
The reading light is tactile, each lens is turned  
on and oꢁ individually by pressing in the re-  
spective central area. In addition, the intensity  
of the light can be adjusted according to the  
pressure exerted.  
●
Immediately go to a specialist workshop  
and have the headlight range control system  
checked.  
If you want to turn on the two lenses together  
you must press the symbol ››› Fig. 105.  
118  
Interior lights  
Luggage compartment lighting  
When the rear lid is opened and closed, the  
luggage compartment lighting turns on or oꢁ.  
Footwell lighting  
The lights in the footwell area below the dash  
(driver and front passenger sides) will switch on  
when the doors are opened and will decrease  
in brightness while driving. This brightness can  
be adjusted through the infotainment system  
menu using the function button  
> Back-  
ground lighting ››› page 35.  
Note  
The reading lights go out when the vehicle  
is closed and locked or after a few minutes  
of turning the ignition oꢀ. This prevents the  
battery from discharging.  
119  
Lights  
Background lighting  
Fig. 106 Schematic diagram: Background  
lighting.  
Background lighting provides lighting in diꢁer-  
ent areas of the interior.  
There are predeꢂned versions of Ambient  
Light ››› Fig. 106.  
The intensity of the lighting can be adjusted  
using the function button  
:
Drive profile Lights up the interior of the  
vehicle depending on the selected drive  
proꢂle.  
Individual To adjust the intensity of the  
background lighting in each of the areas as  
well as to change the colour in the versions  
that have lighting on the front door panel.  
Off Turns oꢁ the background lighting.  
120  

Related Topics

Popular Owner Manuals