Lights
tion, the main beam assist detects illuminated
areas and disconnects the main beam head-
light when passing, e.g. by populated areas.
the main beam on manually. Pull the turn sig-
nal and main beam lever back to switch oꢁ the
main beam manually, if necessary.
Note
●
When you turn the ignition oꢀ without hav-
ing turned the turn signals oꢀ, an acoustic
signal sounds while the driver door is open.
This is intended as a reminder to switch oꢀ
the turn signal, unless you wish to leave the
parking light on.
●
OR: switch oꢁ the ignition.
Within its limitations, the assist system auto-
matically connects or disconnects the main
beam headlight depending on the environ-
mental and traꢁic conditions, as well as the
System limitations
In the following cases, the main beam head-
light must be switched oꢁ manually because
the main beam assist will not disconnect it on
time or disconnect it at all:
speed ›››
.
●
If the convenience turn signals are oper-
ating (three ꢂashes) and the other conven-
ience turn signals are switched on, the active
part stops ꢂashing and only ꢂashes once in
the new part selected.
Switching on the main beam assist
●
On roads with insuꢁicient lighting with very
●
Switch on the ignition and select mode
reꢀective signs
on the headlight control ››› Fig. 103.
●
The turn signal only works when the igni-
tion is switched on. The hazard warning lights
also work when the ignition is switched oꢀ.
●
If road users are insuꢁiciently lit up, e.g. pe-
●
From the base position, press the turn sig-
destrians or cyclists.
nal and main beam headlights lever forwards
3
●
On closed curves, when the traꢁic in the
››› Fig. 104
.
●
The main beam headlights can only be
opposite direction is partially hidden, on pro-
nounced slopes or inclinations.
switched on if the dipped beam headlights
are already on.
When the main beam assist is switched on,
the control lamp on the instrument cluster
screen turns on. When the main beam is on,
the blue main beam control lamp on the
instrument cluster switches on.
●
●
In cold or damp weather conditions, the
On roads with traꢁic in the opposite direction
headlights, tail lights and turn signals may
mist up inside temporarily. This is normal and
in no way eꢀects the useful life of the vehicle
lighting system.
and with a central reservation barrier where
the driver can see over it e.g. lorry drivers.
●
●
●
In the event of fog, snow or heavy rain
In the event of dust or sand storms
Switching the main beam assist oꢀ
●
The parking light does not activate auto-
●
Switching oꢁ mode
control ››› Fig. 103.
EITHER: if main beam assist is on, pull the
turn signal light and main beam headlights
on the headlight
If the windscreen is damaged in the camera's
matically if the left- or right-hand turn signal
is left on and the ignition is disconnected.
ꢂeld of vision.
●
●
If the camera's ꢂeld of vision is misted up,
dirty or covered by a sticker, snow or ice.
Main beam assist (Light Assist)
4
lever back ››› Fig. 104
OR: if the main beam assistant is on, but the
main beam does not turn on, press the turn
signal and main beam lever forwards to turn
.
●
If the camera is damaged or if the power
●
supply has been cut oꢁ.
The main beam assist automatically prevents
glare from vehicles moving in the opposite di-
rection or ahead in the same direction. In addi-
116