2002-2008 Cupra Born SUV Miscellaneous situations User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Miscellaneous situations for Your Cupra Born SUV First Generation (2002-2008)

Changingthewindscreenwiper blades  
6
7
Hook for extracting the central wheel trims  
Clip for removing the wheel bolt caps  
Note  
Miscellaneous situa-  
tions  
The jack does not generally require any  
maintenance. If required, it should be  
greased using universal type grease.  
Some of the items listed are only provided in  
certain model versions, or are optional extras.  
Vehicle tool kit  
The jack, jack handle and wheel wrench are  
only supplied for changing the wheels from  
summer to winter tyres, and vice versa. The  
wheel tool kit must not be kept permanently  
in the luggage compartment. Once delivered  
with the vehicle it must be removed from the  
vehicle or securely fastened in the luggage  
compartment.  
Changing the windscreen  
wiper blades  
On-board toolkit  
Wiper service position  
WARNING  
When the vehicle tool kit, tyre mobility set  
and spare wheel are loose in the interior they  
can be violently thrown in case of a sudden  
manoeuvre or braking and especially in acci-  
dents, causing serious injury.  
Fig. 177 Underneath the ꢀoor panel of the  
luggage compartment: on-board tools.  
●
Ensure that the vehicle tool kit, the tyre  
mobility set and the spare wheel or tempo-  
rary spare wheel are safely secured in the  
luggage compartment.  
The vehicle tool kit is located under the ꢀoor  
panel in the luggage compartment. To access  
Fig. 178 Wipers in service position.  
the on-board tools ››› page 264.  
The tool kit includes:  
Ensure that the wiper blades are not frozen.  
With the wiper in service position, it is possible  
to the fold the wiper arms ››› Fig. 178.  
WARNING  
1
2
3
4
5
Adapter for the anti-theft bolt  
Towing eye, removable  
Wheel spanner  
Unsuitable or damaged vehicle tools can  
cause injury or accidents.  
●
Close the front bonnet, driver’s door and  
● Never work with inappropriate or damaged  
tools.  
passenger door ››› page 282.  
Crank handle for jack  
Jack  
●
Switch the ignition on and oꢁ.  
●
Press the wiper lever brieꢀy upwards.  
269  
Miscellaneous situations  
Before driving, always lower the wiper arms.  
When the wiper lever is brieꢀy pulled upwards,  
the wiper arms return to their initial position.  
If the graphite layer is damaged, the noise of  
the water as it is wiped across the windscreen  
will be louder.  
Changing the windscreen wiper blades  
●
●
Lift and unfold the wiper arms.  
Press and hold release button ››› Fig. 179  
Check the condition of the wiper blades reg-  
ularly. If the wipers scrape across the glass,  
they should be changed if they are damaged,  
1
and pull gently on the wiper blade in the  
Note  
direction of the arrow.  
●
The wiper arms can be moved into the re-  
●
Fit a new wiper blade of the same length  
or cleaned if they are dirty ›››  
.
placement position when the front bonnet is  
fully closed.  
and design on to the wiper arm and hook it  
If this does not produce the desired results,  
the setting angle of the windscreen wiper arms  
might be incorrect. They should be checked by  
a specialised workshop and corrected if neces-  
sary.  
into place.  
●
You can also use the service position, for  
●
Rest the wiper arms back onto the wind-  
example, if you want to ꢀx a cover over the  
windscreen in the winter to keep it clear of  
ice.  
screen.  
Changing the rear window wiper blade  
Damaged windscreen wiper blades should  
be replaced immediately. These are available  
from qualiꢂed workshops.  
Changing the wiper rear wiper  
blades  
Raising and lowering windscreen wiper arms  
●
Place the windscreen wipers in the service  
position ››› page 269.  
●
Grip the wiper arms only by the blade's fas-  
tening point.  
Cleaning windscreen wiper blades  
Fig. 180 Changing the rear wiper blade  
●
●
Raise the wiper arms.  
●
dow.  
Separate the wiper arm from the rear win-  
Use a soft cloth to remove dust and dirt from  
the windscreen wiper blades.  
Fig. 179 Changing the windscreen wiper  
blades  
●
● Rotate the blade lightly ››› Fig. 180 (arrow  
If the blades are very dirty, a sponge or damp  
A
).  
cloth may be used ›››  
.
●
1
Hold down the release button  
while gently  
The windscreen wiper blades are supplied as  
standard with a layer of graphite. This layer is  
responsible for ensuring that the wipe is silent.  
B
pulling the blade in the direction of arrow  
.
270  
Jumpstart
NOTICE  
●
Insert a new blade of the same length and  
NOTICE  
type in the rear wiper arm in the opposite di-  
rection to the arrow  
into place.  
●
To prevent damage to the bonnet and the  
wiper arms, only fold them when in the serv-  
ice position.  
To avoid considerable damage to the vehi-  
cle electrical system, note the following care-  
fully:  
B
1
until button  
hooks  
●
Fold the wiper arm and rest it on the window.  
●
Before driving, always lower the wiper  
arms.  
●
If the jump leads are connected incor-  
rectly, a short circuit may occur.  
WARNING  
●
Use only jump leads with fully insulated  
clamps.  
Worn or dirty windscreen wiper blades re-  
duce visibility and increase the risk of acci-  
dent and serious injury.  
Jump start  
●
Do not allow the vehicles to come into con-  
tact with each other, otherwise current may  
start to ꢁow as soon as the positive poles are  
connected.  
Introduction  
●
Always replace damaged or worn wind-  
screen wiper blades or blades that no longer  
clean the windscreen properly.  
Due to technical reasons, tow starting the vehi-  
cle is not allowed.  
NOTICE  
If the drive system cannot be switched on be-  
cause the 12 volt battery is discharged, the 12-  
volt battery of another vehicle can be used for  
this purpose.  
NOTICE  
Tow starting can cause damage.  
●
Damaged or dirty windscreen wipers could  
scratch the glass.  
●
If products containing solvents, rough  
Suitable jump leads are required for the jump  
start.  
sponges or sharp objects are used to clean  
the blades, the graphite layer will be dam-  
aged.  
The cross section of jump leads for vehicles  
with electric drive systems must be a minimum  
of 25 mm2.  
●
Never use fuel, nail varnish remover, paint  
thinner or similar products to clean the win-  
dows.  
●
In icy conditions, always check that the  
wiper blades are not frozen to the glass be-  
fore using the wipers. In cold weather, it may  
help to leave the vehicle parked with the wip-  
ers in service position ››› page 269.  
271  
Miscellaneous situations  
Jump start: description  
Never connect the black jump lead to the neg-  
ative pole – of the 12-volt battery. Connecting  
it to the negative pole may cause an incorrect  
assessment of the status of the battery in the  
vehicle's electronic system.  
Jump start socket (ground termi-  
nal)  
1. Switch oꢁ the ignition of both vehicles  
›››  
.
2. Connect one end of the red jump lead to  
+
the positive  
terminal of the vehicle with  
A
the ꢀat 12-volt battery  
.
3. Connect the other end of the red jump  
+
lead to the positive terminal  
in the vehi-  
B
cle providing assistance  
.
Fig. 181 In the front compartment: jump  
start socket (ground terminal).  
4. Connect one end of the black jump lead  
C
to a suitable ground terminal, to a solid  
piece of metal in the engine block, or to  
the motor block itself.  
The jump start socket (ground terminal) is  
used for connecting the black jump lead  
››› Fig. 181.  
Only use this socket (ground terminal) when  
jump starting.  
5. Connect one end of the black jump lead  
Fig. 182 Jump lead connection diagram.  
D
to a suitable ground terminal in the ve-  
hicle with the ꢀat 12 volt battery.  
The discharged battery must be properly con-  
nected to the on-board network.  
6. Position the leads in such a way that they  
cannot come into contact with any rotat-  
ing part in the front compartment.  
Make sure the battery clamps have suꢁicient  
metal-to-metal contact with the battery termi-  
nals.  
Starting  
7. Start the engine of the vehicle supplying  
the current and leave it running at idle, or  
switch on the ignition of the electric vehi-  
cle.  
Jump lead terminal connections  
The jump leads should only be connected in  
the order 1 > 2 > 3 > 4 ››› Fig. 182.  
8. Connect the drive system of the electric  
vehicle with the ꢀat 12 volt battery.  
272  
Towingthevehicle
If the system does not switch on, seek the as-  
sistance of specialist personnel.  
●
Keep sparks, ꢁames and lighted cigarettes  
Towing the vehicle  
away from batteries, danger of explosion.  
Failure to comply could result in an explo-  
sion.  
Introduction  
Removing the jump leads  
●
Observe the instructions provided by the  
It takes practice to tow a vehicle, especially  
when using a tow cable. Both drivers should be  
well informed of the special features of towing.  
Inexperienced drivers should refrain from tow-  
ing.  
9. Before you remove the jump leads, switch  
oꢁ the dipped beam headlights if they are  
switched on.  
manufacturer of the jump leads.  
●
Do not connect the negative cable from  
the other vehicle directly to the negative ter-  
minal of the ꢁat battery. The gas emitted  
from the battery could be ignited by sparks.  
Danger of explosion.  
10. Only disconnect the jump leads in the or-  
der 4 > 3 > 2 > 1 with the drive system  
switched on and the engine of the vehicle  
supplying the current running, or the elec-  
tric vehicle ignition switched on.  
During towing, make sure at all times that no  
inadmissible traction forces or jolts are gener-  
ated. On roads without a ꢂrm surface there  
is always the danger of overloading the attach-  
ment parts.  
●
Never attach the negative cable to fuel sys-  
tem components or the brake lines in the  
other vehicle.  
11. Close the battery cover if necessary.  
●
If the drive system cannot be switched on, sus-  
pend the process and try again after approx. 1  
minute. If the drive system still does not switch  
on, seek the assistance of qualiꢂed personnel.  
The non-insulated parts of the battery  
Observe the legal provisions regarding towing.  
clamps must not be allowed to touch. The  
jump lead attached to the positive battery  
terminal must not touch metal parts of the  
vehicle, this can cause a short circuit.  
Towing  
Towing means a vehicle pulling another vehicle  
that is not in a condition to run.  
●
Position the jump leads in such a way that  
WARNING  
they cannot come into contact with any ro-  
tating parts in the front compartment.  
The vehicle can be towed with a tow bar or  
cable.  
●
Please note the warnings when working in  
the front compartment ››› page 282.  
●
Do not lean on the batteries. This could re-  
●
The maximum permitted speed is 50 km/h  
sult in chemical burns.  
●
The battery providing assistance must have  
(30 mph).  
the same voltage as the ꢁat battery (12V)  
and approximately the same capacity (see  
imprint on battery). Failure to comply could  
result in an explosion.  
●
Take into account the instruction manual  
●
The maximum permitted distance is 50 km  
of the jump lead manufacturer and the in-  
struction manual of the other vehicle.  
(30 miles).  
●
Never use jump leads when one of the bat-  
Tow cable and tow bar  
NOTICE  
teries is frozen. Danger of explosion! Even  
after the battery has thawed, battery acid  
could leak and cause chemical burns. If a  
battery freezes, it should be replaced.  
It is safer for the vehicle to be towed using a  
tow bar, avoiding damage to the vehicle. The  
tow cable should only be used if a tow bar is  
not available.  
Immediately go to a specialist workshop and  
have the 12 volt battery checked.  
273  
Miscellaneous situations  
WARNING  
A tow rope should be slightly elastic to avoid  
damage to both vehicles. It is advisable to use  
a tow rope made of synthetic ꢂbre or similarly  
elastic material.  
NOTICE  
Never allow the vehicle to be towed if it has  
no power.  
If the vehicle is pushed by hand, the tail light  
units, the side spoilers of the rear window  
and large sheet metal surfaces may be dam-  
aged. In addition, the rear spoiler could be  
detached.  
●
When towing, never switch oꢂ the ignition  
with the ignition/start button. Otherwise, the  
electronic lock of the steering column could  
suddenly get blocked and it would be impos-  
sible to steer the vehicle. This could cause an  
accident, serious injury and loss of control of  
the vehicle.  
Tow with a tow truck  
The vehicle may only be transported on a on a  
tow truck if all four wheels are supported.  
●
If the vehicle is pushed by hand, the tail  
light units, the side spoilers of the rear win-  
dow, large sheet metal surfaces or the rear  
spoiler.  
Activating rolling ››› page 187  
If necessary, to release the parking brake so  
that the vehicle can be pushed or towed:  
●
If the vehicle runs out of power during tow-  
ing, stop the process immediately and seek  
the assistance of specialised personnel.  
NOTICE  
●
Keep the brake pedal pressed down and se-  
Removing and attaching the cover and the  
towing eye may cause damage to the vehicle,  
for example, on the paintwork.  
lect the N position on the gear selector. Next,  
conꢂrm Activate rolling in the Infotainment  
System.  
NOTICE  
Towing the vehicle with a tow cable or a tow  
bar can cause damage to the vehicle.  
●
To avoid damaging the vehicle, remove and  
replace the cover and the towing eye care-  
fully.  
●
OR: open the vehicle settings in the infotain-  
ment system > Assistants > Park assist >  
Brakes and activate the function.  
●
If the vehicle is towed with a tow cable or  
tow bar, special care must be taken.  
●
If possible, have the vehicle transported on  
NOTICE  
a tow truck.  
WARNING  
Using a towing eye that is not suitable for the  
vehicle can damage it.  
During the towing of a vehicle, the driving  
behaviour and braking capacity change con-  
siderably.  
●
When towing, always use the vehicle’s tow-  
ing eye, which forms part of the on-board  
tools, or an appropriate eye for towing.  
Towing instructions  
During towing, the change of direction can be  
signalled on the towed vehicle even when the  
hazard warning lights are on. To do so, at the  
274  
Towingthevehicle
same time, the turn signal lever must be op-  
erated with ignition switched on. During this  
time the hazard warning lights remain discon-  
nected. When the turn signal lever is returned  
to the rest position, the hazard warning lights  
will be automatically reactivated.  
If the vehicle cannot be towed on its wheels for  
any of the reasons mentioned above, request  
assistance from specialised personnel and, if  
necessary, have the vehicle transported with-  
out the wheels touching the ground. Inform  
the people involved in the towing process, es-  
pecially the organising centre and the carrier,  
that it is an electric vehicle.  
Towed vehicle (behind)  
●
Make sure the ignition is switched on so that  
the steering wheel does not lock and so that, if  
necessary, you can use the turn signals and the  
windscreen wiper.  
●
The brake servo and the power steering only  
work with the drive system connected. Other-  
wise, you will have to depress the brake pedal  
considerably harder and more force will be  
needed to turn the steering wheel.  
Cases where the vehicle must never be  
towed  
Towing  
Do not allow the vehicle to be towed for a long  
distance on its wheels in the following situa-  
tions:  
●
●
Make sure the tow cable is always taut.  
Previous steps  
Select the N gear position.  
●
Secure the tow cable or tow bar using only  
●
A red warning light lights up on the instru-  
If the conditions for towing are not met,  
the vehicle can be towed or pushed on all  
four wheels in emergency situations. However,  
towing is only permitted at walking speed  
and a maximum of 100 m to the tow truck  
the attachment points provided for this pur-  
ment cluster screen and a message is dis-  
played:  
pose ››› . Depending on the equipment,  
these points may be a towing device or a tow-  
ing eye.  
Towing damages the electri-  
cal system. Manual!  
●
Make sure the tow cable is not twisted. Oth-  
›››  
.
erwise the towing eye could unscrew during  
towing.  
●
The power supply of the on-board 12-volt  
electrical system cannot be guaranteed.  
WARNING  
●
Switch on the ignition and the hazard warn-  
●
The 12-volt battery is discharged. The steer-  
ing lights of both vehicles. If necessary, take  
into account other diꢁerent provisions that  
may exist in this regard.  
ing remains locked and, if applicable, the park-  
ing brake cannot be released and the elec-  
tronic steering column lock cannot be released  
if they are engaged.  
If, in spite of displaying the message Tow-  
ing damages the electrical sys-  
tem. Manual!on the instrument cluster  
screen, if the vehicle is towed, vibrations can  
occur in the traction system and the rear  
wheels can be locked, especially if the road  
is wet or has ice. Wheel locking can lead to  
loss of control of the vehicle, accidents and  
serious injury.  
●
Take into account the instructions on towing  
provided in the instruction manual of the other  
vehicle.  
●
The indicator on the instrument panel dis-  
play is not working properly.  
●
(N).  
It is not possible to set the gears to neutral  
Towing vehicle (front)  
The vehicle is not suitable for towing other ve-  
hicles.  
●
There is no guarantee that the wheels will  
turn smoothly or that the steering will work af-  
ter an accident.  
275  
Miscellaneous situations  
●
After towing, unscrew the towing eye clock-  
●
If the message Towing damages the  
wise with a suitable object.  
electrical system. Manual!on the in-  
strument cluster, only tow the vehicle in  
emergency situations, at walking speed and  
for a maximum of 100 m.  
●
Replace the cover and push it in until it clicks  
into place.  
●
Clean the towing eye if necessary and then  
store it in the luggage compartment along with  
the other vehicle tools.  
WARNING  
Never attach the tow rope or tow bar to axle  
or running gear components. They could be  
damaged, resulting in an accident and seri-  
ous injury.  
NOTICE  
The towing eye must always be completely  
and ꢀrmly tightened. Otherwise, it could  
jump out of the housing during towing.  
Fig. 184 Right side of the front bumper:  
towline anchorage screwed in.  
●
Seek specialist assistance and, if applica-  
ble, have the vehicle transported on a tow  
truck.  
The housing of the removable towline anchor-  
age is on the right side of the front bumper  
Fuses  
underneath a cover ››› Fig. 183.  
The towing eye should always be kept in the  
vehicle.  
Front towline anchorage  
Introduction  
In general, a fuse can be assigned to various  
electrical components. Likewise, an electrical  
component can be protected by several fuses.  
Bear in mind the instructions for towing  
››› page 274.  
Only replace fuses when the cause of the  
problem has been solved. If a newly inserted  
fuse blows after a short time, you must have  
the electrical system checked by a specialised  
workshop as soon as possible.  
Fitting the towline anchorage  
●
Remove the towing eye from the vehicle tool  
kit in the luggage compartment ››› page 269.  
●
Remove the cover by pressing down on its  
base and leave it hanging from the vehicle  
››› Fig. 183.  
Fuses for the emergency services (high volt-  
age system)  
Fig. 183 Front bumper on right: remove  
the lid.  
●
Screw the towing eye in the housing by  
turning it to the maximum anticlockwise  
››› Fig. 184 , ››› . Use a suitable object  
that can completely and securely tighten the  
towing eye in its housing.  
In the fuse box inside the vehicle ››› page 277  
there is a high voltage system fuse marked  
with a little yellow ꢀag that allows the emer-  
276  
Fuses
WARNING  
gency services to cut oꢁ the vehicle's voltage  
as quickly as possible. Never replace this fuse  
yourself or place it where other fuses are lo-  
cated. If this fuse fails, have it replaced by a  
qualiꢂed specialist workshop.  
Note  
Using unsuitable fuses, repairing fuses or  
bridging a current circuit without fuses can  
cause a ꢀre and serious injury.  
In the vehicle, there are more fuses than  
those indicated in this chapter. These should  
only be replaced by a specialist workshop.  
●
Never use a fuse with a higher value. Only  
replace fuses with a fuse of the same amper-  
age (same colour and markings) and size.  
Rescue cut-oꢂ point (high voltage system)  
Fuses inside the vehicle  
Under the right rear tail light there is a loop  
also identiꢂed with a yellow ꢀag which, if nec-  
essary, can be cut by the emergency services.  
Warning! To access this loop, remove the  
tail light’s lower rubber waterproof seal, or  
remove the tail light or, in extreme cases,  
break it.  
●
Never replace a fuse by a metal strip, staple  
or similar.  
NOTICE  
●
To prevent damage to the vehicle’s elec-  
trical system, before replacing a fuse always  
turn oꢂ the ignition, the lights and all electri-  
cal elements.  
WARNING  
●
When replacing fuses, make sure that it is  
The high voltages in the electrical system can  
give serious electrical shocks, causing burns  
and even death!  
not possible to switch on the drive system.  
Fig. 185 On the dashboard on the driver  
●
Protect the fuse boxes when open to pre-  
vent the entry of dust or humidity as they can  
damage the electrical system.  
side: lid of the fuse box.  
●
Never touch the electrical wiring of the ig-  
nition system.  
●
Take care not to cause short circuits in the  
NOTICE  
electrical system.  
Never remove the high-voltage fuse marked  
with a special ꢁag in the dash panel fuse box.  
This fuse is used exclusively by the emer-  
gency services to de-energise the vehicle as  
quickly as possible.  
The high voltage system's fuse loop (rescue  
cut-oꢂ point) is only designed for use by  
qualiꢀed emergency services. If damaged,  
the high voltage system is deactivated.  
277  
Miscellaneous situations  
Identifying fuses below the dashboard by  
colours  
Fuses in the front compartment  
Current intensity in  
Colour  
amps  
Orange  
Brown  
Red  
5
7.5  
10  
15  
Blue  
Fig. 186 Right-hand drive vehicles: fuse  
box cover under the passenger side dash  
panel.  
Yellow  
20  
25  
White or transpar-  
ent  
Fig. 187 In the front compartment: fuse  
box cover.  
Vehicles with the steering wheel on the left:  
open the fuse box cover under the dash  
panel  
Green  
30  
40  
Orange  
Opening the fuse box in the front compart-  
ment  
●
Grasp the back of the cover and remove it in  
the direction of the arrow ››› Fig. 185.  
NOTICE  
●
Open the front bonnet ›››  
on page 282.  
●
To ꢂt the cover, place it on the opposite side  
●
Always carefully remove the fuse box cov-  
ers and reꢀt them correctly to avoid prob-  
lems with your vehicle.  
●
Press the locking tabs to unlock the fuse box  
and close it in the opposite direction to the  
arrow until it audibly clicks into place.  
1
cover ››› Fig. 187  
●
.
Then lift the cover out.  
●
Protect the fuse boxes when open to avoid  
Right-hand drive vehicles: opening the fuse  
box inside the glove compartment  
the entry of dust or humidity. Dirt and hu-  
midity inside fuse boxes can cause damage to  
the electrical system.  
●
To ꢀt the cover, place it on the fuse box.  
Push the locking tabs down until they click au-  
dibly into place.  
●
Open the glove compartment and, if neces-  
In the fuse box there may be plastic tweezers  
sary, empty it.  
2
for removing fuses ››› Fig. 187  
.
●
1
Remove the cover from above ››› Fig. 186  
.
●
To ꢂt the cover, put it in place and snap on  
the top. Close the glove compartment  
278  
Fuses
To replace a fuse  
Replace a blown fuse  
No. Consumers/Amps  
●
●
Remove the fuse.  
18  
Access and start system /  
Steering column locking / Anti-  
theft protection control unit  
Replace the blown fuse by one with an iden-  
5
5
tical amperage rating (same colour and mark-  
ings) and identical size.  
19  
Instrument cluster / Navigation  
system OCU4  
●
lid.  
Replace the cover again or close the fuse box  
20 Transmission and reception  
stabilisation control unit / Mo-  
bile interface / Media device  
interface  
7.5  
Fuse placement  
Fuses in the vehicle interior  
No. Consumers/Amps  
21  
22  
23  
25  
26  
Top view camera  
7.5  
10  
5
Fig. 188 Image of a blown fuse.  
Motor control unit  
Internet access control unit  
Driver’s seat belt  
2
4
5
6
7
Airbag control unit  
15  
7.5  
25  
30  
30  
15  
Preparations  
●
Front camera  
Switch oꢁ the ignition, lights and all electrical  
25  
30  
equipment.  
On-board network control unit  
On-board network control unit  
Seat heating control unit  
Sunroof  
Right rear window control  
unit / Right-hand door control  
unit  
●
Open the corresponding fuse box  
››› page 277, ››› page 278.  
27  
Passenger seat belt  
25  
10  
Recognise a blown fuse  
8
9
28  
Rescue and high-voltage sys-  
tem manual disconnection  
point. Identiꢁed by a yellow la-  
bel  
A blown fuse can be recognised if the metal  
Rear left window control / left  
hand door control unit  
30  
strip is melted ››› Fig. 188.  
●
Point a lamp at the fuse to see if it has blown.  
13  
14  
17  
On-board network control unit  
Digital sound ampliꢁer  
40  
30  
30 ICAS3 control unit  
25  
25  
15  
Exterior mirrors / Park assist  
control unit / Blind spot con-  
trol unit  
32  
34  
On-board network control unit  
5
Heating and air-conditioning  
control unit  
36  
Fan  
40  
279  
Miscellaneous situations  
No. Consumers/Amps  
No. Consumers/Amps  
No. Consumers/Amps  
61  
Inverter for the rear axle drive  
motor  
5
10  
11  
Left front wiper motor  
Air conditioning relay  
30  
30  
38  
Control unit for front seats with  
massage function  
7.5  
66 Rear window wiper  
15  
39  
Steering column control unit  
15  
7.5  
5
12  
Actuator 1 for engine sound  
generation  
7.5  
67  
Rear window heating / Filter for  
frequency modulation  
30  
40 Alarm horn  
13  
15  
16  
23  
24  
25  
ABS control unit  
ABS control unit  
Cooling fan  
25  
40  
50  
10  
5
41  
43  
Diagnostics for the data bus  
Relay R3_LVI / Vehicle interior  
temperature sensor / Vehicle  
interior carbon dioxide sensor  
7.5  
Individual fuses  
No. Consumers/Amps  
Engine control unit  
Cooling fan  
44 Diagnosis / Power window  
control unit / Anti-theft alarm  
system sensor / Roof module  
(LINDA) / Air humidity, rain  
and light sensor / warning light  
switch / Lighting control unit  
[LiSi]  
7.5  
SITR B-rack slot Front right hand  
15  
15  
10  
SITR A-Frame Slot - Front left hand  
seat adjustment control panel  
seat settings control panel  
High-voltage heating (PTC) /  
HV battery heating / Cooling  
pump for thermal manage-  
ment  
10  
2
Fuses in the front compartment  
No. Consumers/Amps  
26  
32  
Jalouise radiator / Water pump  
(HV heater)  
10  
50  
45  
Steering column control unit  
5
46 Screen control unit / Front  
projection (head-up display)  
control unit  
7.5  
Brake servo  
2
3
ABS control unit  
7.5  
10  
On-board charger / Power and  
control electronics for the  
electric drive / Voltage trans-  
former  
Note  
47  
Suspension control unit (DSTG)  
10  
7.5  
20  
●
In the vehicle, there are more fuses than  
48 Rear USB  
those indicated in this chapter. These should  
only be changed by a specialised workshop.  
52  
59  
12V socket in luggage com-  
partment  
4
5
6
7
Front left LED headlight  
Front right LED headlight  
Distance control unit (MRR)  
Right front wiper motor  
Horn relay  
30  
30  
7.5  
30  
15  
●
Positions not containing a fuse do not ap-  
Electrochromic mirror / Relay  
R1_LVI  
7.5  
7.5  
pear in the following tables.  
60 Diagnosis  
9
280  
Changingbulbs
●
Some of the equipment listed in the tables  
below pertain only to certain versions of the  
model or are optional extras.  
●
Please note that the above lists, while cor-  
rect at the time of printing, are subject to  
change.  
Changing bulbs  
Change a bulb  
LED technology lights  
Full-LED headlights handle all light functions  
(daylight, side light, turn signal, dipped beam  
and route light) with light emitting diodes  
(LEDs) as a light source.  
Full-LED headlights are designed to last the  
lifetime of the car and light bulbs cannot be  
replaced. In case of headlight failure, go to an  
authorised workshop to have it replaced.  
The tail lights, number plate light, side turn sig-  
nals and additional brake light are all LED bulbs.  
With this in mind, they should be replaced by a  
technical service.  
281  

Related Topics

Popular Owner Manuals