Transport and practical equipment
Maximum power consumption
●
●
Do not spill liquids onto the socket.
LED on the power socket
Do not plug adapters or extension cords
Maximum power con-
Steady green
light:
The childproof lock is unlocked.
The socket is ready to operate.
Power socket
into the 230 volt power socket. Otherwise,
the integrated child lock will be unlocked
and the power socket will operate.
sumption
12 Volts
120 Watts
The ignition is switched off, but
there is enough power available
to continue supplying the socket
with current for a maximum of 10
minutes. If the connector is un-
plugged before this time elapses,
the socket is disconnected and
cannot be used again until the ig-
nition is switched on again.
●
Do not insert conductive objects (a knit-
150 watts (300 watts - maximum
2 minutes)
230 Volts
ting needle, for example) into the 230 volt
power socket.
Flashing green
light:
Electrical equipment can be connected to
the 12 volt power socket.
WARNING
Make sure that the maximum power con-
sumption displayed on each outlet is not ex-
ceeded. The power consumption of devices
is shown on the model plate.
The power socket works only when the ig-
nition is on. Improper use may cause seri-
ous injury or even fire. Children should
therefore not be left in the vehicle unatten-
ded if the button is also left behind. Other-
wise there is a possibility that they may be
injured.
There is an anomaly, e.g. discon-
nection due to a current surge or
overheating.
Flashing red light:
When connecting two or more electrical de-
vices at the same time, make sure that their
total consumption never exceeds 190 watts
Disconnection due to overheating
When the temperature exceeds a certain
value, the 230 volt socket inverter is auto-
matically disconnected. The disconnection
prevents overheating when the power con-
sumption of the connected devices is exces-
sive or the ambient temperature is very high.
The 230-volt power supply can be used once
again after a cooling time. First unplug the
connector of the connected device and
then plug it back in again. This prevents the
electrical device from being switched on
again if this is not wanted.
.
›››
CAUTION
230 volt power socket
Always use the correct type of plugs to
avoid damaging the sockets.
With the engine running, the power socket
Fig. 142 activates automatically as soon as
a connector is plugged in. If there is enough
power available, the socket can still be used
while the engine is off
›››
CAUTION
●
230 volt power socket:
›››
–
Do not leave devices or connectors that
are too heavy (e.g. a transformer)
hanging directly from the power sock-
et.
Connect an electrical device: Open the cov-
er and insert the plug into the power socket
as far as possible to unlock the built-in child
lock. The socket only supplies power once
the child lock is unlocked.
–
–
Do not connect neon lamps.
WARNING
Only connect devices to the socket if
the device and socket voltage match.
The electrical system is under high voltage!
»
153
English 
