Get Operation -> Seat functions Guide for Cupra Leon 4 Door First Generation (2020-2026)

Operation

●

The headrest must lock correctly in one

Unlock the backrest page 135 .

›››

Seat functions

position.

Move the headrest upwards until it arrives

to the top.

Memory function

●

Press button Fig. 109

, while simulta-

›››

Removing and fitting the headr-

ests

neously pressing on the security hole

with

a flat screwdriver a maximum of 5 mm wide,

and remove the headrest.

●

Move the backrest until it engages properly

in Folding down and raising the rear

›››

seat backrest on page 136.

Fitting the rear headrests

Fig. 110 On the outer side of the driver's

seat: memory buttons.

To mount the external headrests, the corre-

sponding backrest must be partially folded

forward.

Memory buttons

●

Unlock the backrest page 135 .

›››

The memory buttons can be used to save

and turn on settings for the driver seat and

the exterior mirrors.

Fig. 109 Rear headrest: removal.

Insert the headrest bars into the guides

until they perceptibly engage. It should not

be possible to remove the headrest from the

backrest.

Removing and fitting the front headrests

●

Move the headrest upwards until it arrives

to the top.

Save the settings of the driver seat and the

exterior mirrors while driving forward

●

Move the backrest until it engages properly

●

Press the side button Fig. 107

and

›››

in Folding down and raising the rear

›››

●

Apply the electronic parking brake.

remove the headrest.

seat backrest on page 136.

●

Move the gearshift to the neutral position.

Switch the ignition on.

●

To refit, insert the headrest into the holes

in the backrest, pushing it down until it en-

gages.

WARNING

Adjust the driver seat and the exterior mir-

Remove the rear headrests only when it is

necessary to fit a child seat. After removing

a child seat, refit the headrest immediately.

rors.

Removing the rear headrests

●

Press  for longer than 1 second

Fig. 110.

›››

To remove the headrest, the corresponding

backrest must be partially folded forward.

●

Press the memory button in which to store

the settings within approx. 10 seconds. A

134

Seats and headrests

warning sound will confirm they have been

stored.

changed to a position other than R

Folding down and raising the rear

seat backrest

page 128.

›››

Storing the passenger rear view mirror set-

tings while driving in reverse

Initialising the seat position memory

The position memory system must be restar-

ted if, for example, the driver seat has been

changed.

●

Apply the electronic parking brake.

Move the gearshift to the neutral position.

Switch the ignition on.

Restarting deletes all memories and assign-

ments for the seat with position memory.

The memory keys can then be programmed

again.

Press the required memory button.

Select reverse gear.

Adjust the front passenger exterior mirror

●

Open the driver door and do not get into

the vehicle.

so that you can see, for example, the kerb

area well.

Fig. 111 Rear seat: clip to hold the seatbelt

in place.

●

Operating the seat settings from outside

the vehicle.

●

The new position of the mirror will be stor-

ed automatically and allocated to the vehicle

key that was used to unlock the vehicle.

●

Move the angle of the seat backrest com-

pletely forwards.

Activating settings

●

Release the control to set the angle and

then press again until an audible warning is

heard.

●

With the vehicle stopped and the ignition

switched on, press and hold the correspond-

ing memory button until the saved position is

reached.

WARNING

●

Adjust the memory function only when the

vehicle is stationary.

OR: With the ignition switched off and the

driver's door open, briefly press the corre-

sponding button.

Fig. 112 Rear seat: folding the backrest.

●

Note

The front passenger side exterior mirror

The rear seat backrest is split and each part

be lowered separately to extend the luggage

compartment.

automatically changes from the position

stored for reversing as soon as the vehicle

moves forward at a speed of at least 15 km/h

(10 mph) or when the gear selection lever is

If the driver door is opened approx. 10 mi-

nutes after the vehicle was unlocked or lat-

er, the driver seat and the exterior mirrors

do not move automatically.

135

Operation

Folding the backrest forwards

Unlock the seat backrest with the

cord

centre rear seat. If someone is seated in a

seat whose backrest is not properly engag-

ed they will fly forward, along with the

backrest, during an accident or a sudden

driving or braking manoeuvre.

●

Place the side seat belts in the trim clip

Fig. 111.

›››

●

3 Valid for: LEON Sportstourer

Completely lower the rear headrests

page 133.

›››

●

A red signal on the button

warns that

Press the unlock button Fig. 112

wards and at the same time fold the backrest

for-

›››

the backrest is not engaged. Always check

that the red marking is not visible when the

backrest is in the upright position.

down. The rear seat backrest is not engaged

when the red marking of the button

visible.

●

When the rear seat backrest is lowered or

is not properly engaged nobody else can

travel in the corresponding seats (not even

a child).

Converting the table to a seat

●

Raise and lock in the back rest. The red

marking on the tab

should no longer be

CAUTION

Fig. 113 In the luggage compartment: lev-

ers to unlock the rear backrest.

visible when the backrest is properly se-

cured.

Serious damage can be caused to the vehi-

cle and other objects if the rear seat back-

rest is lowered or lifted without due care

and attention.

●

Lower the head restraint properly.

Open the rear lid.

WARNING

Serious injuries can be caused if the rear

seat backrest is lowered or lifted without

due care and attention.

●

Before lowering the rear seat backrest,

Pull the remote release lever of the left

always adjust the front seats so that neither

the head restraints nor the cushions of the

rear backrest can hit them.

part Fig. 113

or right part

of the

›››

backrest in the direction of the arrow. The

released part of the rear seat backrest is fol-

ded automatically down and forwards.

●

Never lower or lift the rear seat backrest

while driving.

●

Do no trap or damage the seat belt when

●

If this occurs, close the rear lid.

raising the rear seat backrest.

●

When lowering or lifting the rear seat

The rear seat backrest is not engaged when

backrest, keep your hands, fingers, feet and

other body parts out of its path.

the red marking of the button Fig. 112

›››

is visible.

●

For the rear seat belts to offer the neces-

sary protection all the parts of the rear

backrest must be properly engaged. This is

particularly important in the case of the

136

Operation -> Seat functions for Your Cupra Leon 4 Door First Generation (2020-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals