2024-2026 Cupra Terramar SUV Checking and refilling levels -> 48-volt battery User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Checking and refilling levels -> 48-volt battery for Your Cupra Terramar SUV First Generation (2024-2026)

370
Checking and relling levels
12-V power supply limited. Drive with extra
caution.
The 12-volt power supply is limited because
the 12V battery is discharged or not working
at full performance, for example due to very
cold outside temperatures. The 12-volt battery
can be charged while driving. Until the warning
disappears, you should drive with care.
12-volt battery
The indicator lamp lights up YELLOW. One of
the following messages is displayed:
Error: 12-V supply. Please visit workshop.
Error: 12-V battery. Please visit workshop.
There is a fault in the 12-volt power supply:
●
Contact a specialised workshop.
●
Have the electrical system checked.
12-volt battery
The indicator lamp lights up YELLOW. The fol-
lowing message is displayed:
The 12V battery is being discharged. Switch
on the engine.
With the engine o, this message may appear
a few seconds after turning on the ignition.
However, this is normal. It simply alerts you
that the 12-volt battery is discharging. As soon
as the engine is started, the lamp will switch o.
48-volt battery
General information
✓ Valid for: Mild Hybrid vehicles (MHEV)
Fig.235 48-volt battery: hazard warning
1
Never expose the 48 volt battery to sour-
ces of re, sparks or unprotected ames.
2
The instruction manual and the workshop
documentation contain further informa-
tion and warnings in this regard.
3
Always keep children away from the 48 volt
battery.
4
If the 48-volt battery is damaged, uid can
leak and very corrosive acids can form.
The battery should only be handled by
qualied personnel.
5
All maintenance works involving the 48
volt battery should only be performed by
duly qualied and trained technical sta .
6
Take care when handling ammable sub-
stances.
In addition to a 12-volt battery, the vehicle may
be tted with a 48-volt battery located under-
neath the front passenger seat.
The works that are to be carried out on the 48
volt battery should be performed exclusively
by a specialised workshop with duly qualied
technical sta, trained according to CUPRA
guidelines.
Overview of the 48 volt system
The 48 volt system consists of the following
components, among others:
●
48-volt battery
●
12V/48V voltage converter
●
48 volt alternator/starter motor
●
Purple 48 volt cables
48 volt battery warnings
There is a hazard warning sign on the 48 volt
battery ›››Fig.235.
Checking and relling levels
371
48-volt battery
WARNING
Inappropriate handling of the 48 volt battery
can cause serious injuries or death.
●
All maintenance works involving the 48 volt
battery should only be performed by duly
qualied and trained technical sta .
●
Never make any changes to the 48 volt bat-
tery.
WARNING
Make sure the 48 volt battery does not come
into contact with water or other uids.
●
Liquids may cause short circuits, electrical
shocks and burns.
Troubleshooting
✓ Valid for: Mild Hybrid vehicles
Control lamps and driver messages on the in-
strument cluster display or infotainment sys-
tem:
48-volt battery
The indicator lamp lights up red. The following
message is displayed:
Battery: Risk of re! Stop safely and get out
quickly. Call the emergency services.
The 48V battery temperature is too high
.
If this message is displayed on the instrument
cluster, follow the steps below:
●
Stop driving! Stop the vehicle immedi-
ately, taking into account the traic situation.
●
Choose a safe place outdoors, away from
buildings or vehicles, canopies, covered car
parks or similar places.
●
If possible, switch on the hazard warning
lights.
●
Before leaving the vehicle, make sure it is im-
mobilised (parking brake, parking lock P).
●
Switch o the ignition and leave the ignition
key on the dash panel or in a visible place so
that the emergency services can use it (for ex-
ample to recover the vehicle from a hazardous
area).
●
Exit the vehicle and make sure that there are
no other people or animals left inside.
●
Make sure that you leave the danger zone
together with all other vehicle occupants and
that everyone remains in an area that is protec-
ted from traic (e.g. behind the guard rail).
●
Notify the emergency services.
48-volt battery
The indicator lamp lights up red while driving.
The following message is displayed:
Error: 48V power supply. Stop safely! Please
refer to the instruction manual.
There is a error in the 48V power supply.
1. Park the vehicle in a safe place.
2. Stop the engine and turn o the ignition.
3. Wait for a few seconds.
4. Switch ignition back on.
5. Start the engine.
If the lamp remains on, seek professional assis-
tance. CUPRA recommends going to a CUPRA
dealer or any SEAT dealership for this.
48-volt battery
When the vehicle is stopped, the warning lamp
lights up yellow and the following message is
displayed:
Error: 48V power supply. Do not start driv-
ing. Please refer to the instruction manual.
There is a error in the 48V power supply.
1. Park the vehicle in a safe place.
2. Stop the engine and turn o the ignition.
3. Wait for a few seconds.
4. Switch ignition back on.
5. Start the engine.
If the lamp remains on, seek professional assis-
tance. CUPRA recommends going to a CUPRA
dealer or any SEAT dealership for this.
48-volt battery
When the vehicle is stopped, the warning lamp
lights up yellow and the following message is
displayed:

Related Topics

Popular Owner Manuals