48V battery charge low. Start the engine or
refer to the owner's manual.
48V Battery state of charge warning.
1. Start the engine.
2. Stand in a safe place and leave the engine
running for a few minutes.
If the lamp remains on, seek professional assis-
tance. CUPRA recommends going to a CUPRA
dealer or any SEAT dealership for this.
If the engine cannot be started:
1. Switch the ignition o.
2. Use the Jump start ›››page340.
If the vehicle still won’t start, seek professio-
nal assistance. CUPRA recommends going to a
CUPRA dealer or any SEAT dealership for this.
Energy management
Optimisation of the starting ca-
pacity
Energy management controls the electrical
power distribution so that there is always
enough electrical power to start the engine.
If a vehicle with a conventional energy system
remains stationary for a long period of time,
the electrical devices, for example in the elec-
tronic ignition lock, discharge the battery. Un-
der certain circumstances, this can lead to a
lack of electrical power to start the engine.
In your vehicle, a smart energy management
system is responsible for distributing the elec-
trical energy. This clearly improves the starting
performance and service life of the battery.
The main functions incorporated in the power
management system are battery diagnosis,
residual current management and a dynamic
power management system.
Battery diagnostics
Battery diagnostics determine the status of the
battery on an ongoing basis. The battery volt-
age, current and temperature are monitored
for this purpose. This is used to determine the
battery's charge level and eiciency.
Residual current management system
The residual current management reduces en-
ergy consumption while the vehicle is station-
ary. When the ignition is switched o, it man-
ages the power supply to the various electrical
devices. In doing so, it takes into account the
battery diagnostic data.
With the ignition on and depending on the
battery's charge level, it disconnects electrical
devices one after the other to avoid over-dis-
charging the battery and to maintain starting
capacity.
Dynamic energy management system
Energy generated while driving is distributed
by the dynamic energy management system to
the electrical devices according to their energy
requirements. It also ensures that no more en-
ergy is consumed than is generated, thus en-
suring an optimal battery charge level.
Note
●
The energy management system cannot
override the limits imposed by the laws of
physics. Please note that the capacity and
service life of the battery are limited.
●
When there is a risk that the vehicle will not
start, the low battery charge level warning
lamp will be shown
›››page369.
Discharged battery
Maintaining starting capacity has top priority.
Battery strain is considerable on short jour-
neys, city driving and in the cold season of the
year.
In these situations, a lot of energy is required
but very little is generated. If the engine is
stopped and at the same time the electrical
devices are switched on, the battery can be-
come discharged to a critical point. In this case
energy is consumed without being generated
at the same time.