2024-2026 Cupra Terramar SUV Opening and closing User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Opening and closing for Your Cupra Terramar SUV First Generation (2024-2026)

98
Opening and closing
1
2
3
4
5
Opening and closing
Set of vehicle keys
Vehicle key
Fig.69 Vehicle key
Fig.70 Centre console: vehicle key housing.
Unlocks the vehicle.
Locks the vehicle.
Unlocks only the rear lid.
Press the button until all the turn signals
on the vehicle ash briey.
You have 2 minutes to open the rear lid.
Once this time has passed, it will lock
again. In addition, the lamp on the key
ashes.
Control lamp.
Alarm button. Only press in the event of
an emergency! When the alarm button is
pressed, the vehicle's horn sounds and the
turn signals light up for a short time. Press
again to disconnect.
The vehicle can be locked and unlocked from a
distance using the vehicle key ›››
page105.
The vehicle key includes an emitter and bat-
tery. The receiver is in the interior of the ve-
hicle. The range of the vehicle key with re-
mote control and new battery is several metres
around the vehicle.
If it is not possible to open or close the vehicle
using the remote control key, this should be
re-synchronised ›››page100 or the battery
changed ›››page100.
Dierent keys belonging to the vehicle may be
used.
Control lamp on the vehicle key
When a button is pressed briey on the vehicle
key, the control lamp
4
›››
Fig.69 ashes
once briey, but if pressed for a long period
of time, it will ash several times, for example,
when using the comfort opening.
If the vehicle key control lamp does not light up
when the button is pressed, replace the key's
battery ›››page100.
Key housing
Depending on the version, there is a housing
for the key close to the start button ›››Fig.70.
Warning! Do not confuse with the location for
the emergency start ›››page169.
Spare key
To obtain a spare key and other vehicle keys,
the vehicle chassis number is required.
Each new key contains a microchip which must
be coded with the data from the vehicle's elec-
tronic immobiliser. A vehicle key will not work
if it does not contain a microchip or the micro-
chip has not been encoded. This is also true
for keys which are specially cut for the vehicle.
The vehicle keys or new spare keys can be
obtained from a specialised CUPRA dealer or
SEAT Oicial Service, a specialised workshop
or an approved key service qualied to create
this kind of key.
Opening and closing
99
Set of vehicle keys
New keys or spare keys must be synchronised
before use ›››page100.
WARNING
●
Never leave children or disabled persons in
the vehicle. In case of emergency, they may
not be able to leave the vehicle or manage on
their own.
●
An uncontrolled use of the key by third
parties could activate a piece of electrical
equipment (e.g. power windows), with the re-
sulting accident hazard. The vehicle doors
can be locked with the remote control key,
making it diicult to get help in an emer-
gency.
●
Never leave the keys inside the vehicle. An
unauthorised use of your vehicle could result
in injury, damage or theft. Therefore always
take the key with you when you leave the ve-
hicle.
NOTICE
Do not leave the key near the Wireless
Charger area as this may cause interference.
NOTICE
All of the vehicle keys contain electronic
components. Protect them from damage,
impacts and humidity.
Note
●
Only use the key button when you re-
quire the corresponding function. Pushing
the button unnecessarily could accidentally
unlock the vehicle or trigger the alarm. It is
also possible even when you are outside the
radius of action.
●
Key operation can be greatly inuenced by
overlapping radio signals close to the vehicle
working in the same range of frequencies,
for example, radio transmitters or mobile tel-
ephones.
●
Obstacles between the remote control and
the vehicle, bad weather conditions and dis-
charged batteries can considerably reduce
the range of the remote control.
●
If the buttons of the vehicle key are
pressed or one of the central locking but-
tons ›››
page106 is pressed repeatedly in
short succession, the central locking briey
disconnects as protection against overload-
ing. The vehicle is then unlocked. Lock it if
necessary.
●
Spare remote control keys are available at
your Technical Service, where they must be
matched to the locking system.
Pulling out the key blade
Fig.71 Vehicle key: remove the key blade.
The central locking remote control has the
key blade inside it for use in case of emer-
gency locking/unlocking of the driver's door
›››
page110.
●
Press the ›››Fig.71
1
button to release the
ring from the key fob and remove the key blade
2
. Pressing lightly on the ring leaves it xed as
a key fob.
●
Press the ›››Fig.71
1
button to unlock.
Press and hold button
1
and at the same time
pull on the ring in the direction of the arrow
›››
Fig.71
2
to completely remove the key
blade.
100
Opening and closing
Changing the battery
Fig.72 Vehicle key: open the battery
compartment cover.
Fig.73 Vehicle key: removing the battery.
CUPRA recommends you ask a specialised
workshop to replace the battery.
The battery is located at the back of the vehi-
cle key, under a cover.
Changing the battery
●
Remove the key blade from the vehicle key
›››page100.
●
Insert the key blade into the slot ›››Fig.72,
press it in the direction of the arrow
1
and
detach the cover by levering it
2
.
●
Remove the battery from the compartment
with a suitable thin object ›››Fig.73.
●
Insert the new battery and press it into the
battery compartment ››› .
●
Place the cover and press it into the vehicle
key housing until it clicks into place.
WARNING
Swallowing a battery with a diameter of 20
mm or any other button battery can cause
serious injuries or even death within a very
short time.
●
Keep the vehicle key and key fobs with bat-
teries out of reach of children.
●
If you suspect that someone may have
swallowed a battery, seek medical attention
immediately.
NOTICE
●
If the battery is not changed correctly, the
vehicle key may be damaged.
●
Use of unsuitable batteries may damage
the vehicle key. For this reason, always re-
place the dead battery with another of the
same voltage, size and specications.
●
When tting the battery, check that the
polarity is correct.
For the sake of the environment
Please dispose of your used batteries cor-
rectly and with respect for the environment.
Synchronize the vehicle key
If the
button is pressed frequently outside of
the vehicle range, it is possible that the vehicle
can no longer be locked or unlocked using the
key. In this case, the key must be resynchron-
ised as described below:
●
Stand next to the vehicle.
●
Briey press the button on the vehicle key
twice.
OR:
●
Remove the emergency key ›››page98.
●
Press the button on the key.
●
Unlock the vehicle with the emergency key.
Opening and closing
101
Keyless Access system
A
B
●
Open the driver’s door. If the vehicle is tted
with an anti-theft alarm, it will trigger immedi-
ately ›››page108.
●
Switch the ignition on. Please note: to turn
on the ignition, place the vehicle key at the
bottom of the central armrest box, as close as
possible to the Kessy logo .
This completes the synchronization.
Keyless Access system
Locking and unlocking with the
Keyless Access system
Fig.74 Keyless Access: proximity zones.
Fig.75 Door handle: sensor surfaces.
›››
Fig.75
Unlocking sensor surface on the inside of
the door handle.
Locking sensing surface on the outside of
the door handle.
Depending on the equipment, the vehicle may
have the Keyless Access system. This is a key-
less locking and starting system that can un-
lock and lock the vehicle without actively using
its key. For this, it is only necessary that there
is a valid vehicle key in the detection area cor-
responding to the attempted access to the ve-
hicle.
Conguring the Keyless Access system
The behaviour of the Keyless Access system
can be adjusted in the Vehicle settings menu
of the Infotainment system ›››
page39.
If the Keyless Access function is disabled, its
operation is limited.
Unlocks the vehicle
●
Touch the sensor surface on the inside of the
handle
A
. All turn signals ash twice.
If selective opening is tted, touching the sen-
sor's surface twice unlocks the entire vehicle.
If the vehicle is not unlocked for an extended
period, the function is deactivated. The func-
tion will reactivate the next time that the vehi-
cle is unlocked with the remote control.
Locks the vehicle
●
Park the vehicle.
●
Touch the sensor surface
B
›››
Fig.75 on
the outside of the door handle. All turn signals
ash once.
To check that the vehicle is properly locked,
the unlocking function is deactivated for a few
seconds.
Vehicle locking when walking away
The vehicle may lock automatically when you
walk away from it. The following conditions
must be met simultaneously:
●
The function is active in the infotainment
system.
●
All vehicle keys are outside the locking area.
All turn signals ash once when automatic
locking has been performed successfully.
Automatic locking will not occur if there is an-
other vehicle key in the vehicle.
102
Opening and closing
One-time deactivation of automatic locking:
1. Press and hold the button for more than
2 seconds with the door open.
Automatic locking will not be available until
the next time the vehicle is intentionally
locked.
The vehicle is only locked if all doors and
the rear lid are closed. If this option has
been activated in the vehicle settings, an
audible warning may be heard to indicate
that a door is open.
In vehicles tted with the “Safe” security sys-
tem, when the vehicle is locked while walking
away from it, it locks without the “Safe”func-
tion. This is indicated to the user by an audible
signal. The vehicle’s “Safe” system is only acti-
vated after intentionally locking using the door
handle or contact key.
If the key is in the detection zone around the
vehicle for a prolonged period of time, the op-
tions for locking when you walk away from the
vehicle and unlocking when you approach it
may work in a limited manner.
Note
If the vehicle is parked for a prolonged period
of time without being used, it can only be
unlocked via the sensor surface inside the in-
terior of the driver's door handle or with the
contact key.
Unlocking the vehicle on approach
The vehicle can be unlocked by approaching it.
For this to work, the function must be activated
in the infotainment system and the vehicle key
must be in the vehicle's approach area.
●
The vehicle is unlocked when the vehicle key
is detected nearby ›››Fig.74. All turn signals
ash twice.
If the vehicle is not unlocked for an exten-
ded period of time, the “Unlock vehicle when
approaching it” function is deactivated. This
function reactivates when the vehicle is locked
again.
When activating the unlocking function for
certain doors in the central locking settings in
the infotainment system, it is possible that the
“Unlock vehicle when approaching” function
will only work to a limited extent.
Unlocking the rear lid
When the vehicle is locked and the “Keyless
Access” function is active, the rear lid auto-
matically unlocks when it is opened if there is
a vehicle key in its proximity zone. The rear lid
locks again after closing.
If the central locking of all doors and the un-
lock when approaching function in “Keyless
Access” are active, the vehicle remains un-
locked after the rear lid is closed. The vehicle
does not lock automatically
Temporarily deactivating the Keyless Access
system
The “Keyless Access” system’s unlocking func-
tion can be temporarily deactivated:
●
Move the gear lever to position P since oth-
erwise the vehicle cannot be locked.
●
Lock the vehicle using the button on the
vehicle key.
●
Within 5 seconds, touch the sensor on the
outside of the door handle once ›››Fig.75
B
. Do not grip the handle while doing so. This
temporarily deactivates the Keyless Access sys-
tem.
●
Check that it is deactivated by pulling on the
door handle after at least 10 seconds. It should
not be possible to open the door.
The next time, the vehicle can only be un-
locked electronically with the vehicle key. After
being unlocked the next time, the Keyless Ac-
cess system will be activated again ››› .
Permanently disabling the Keyless Access
system
The Keyless Access system can also be perma-
nently deactivated in the infotainment system
››› .
Opening and closing
103
Keyless Access system
Comfort functions
To close all the electric windows and the sun-
roof using the comfort function, keep a nger
for a few seconds on the locking sensor sur-
face
B
of the door handle until the windows
and roof have closed.
How the doors open when touching the sen-
sor surface on the door handle will depend on
the settings that have been activated in the
infotainment system, using the function button
> Vehicle > Exterior > Opening/Closing.
NOTICE
Deactivating the Keyless Access system also
deactivates the sensor controlled opening
and closing of the rear lid, although the func-
tion is shown as “active” in the vehicle menu.
Note
●
Depending on the function set on the info-
tainment system for the mirrors, the exterior
mirrors will unfold and the surround lighting
will come on when unlocking the vehicle us-
ing the sensor surface on the driver and pas-
senger door handles.
●
If the vehicle is tted with an automatic
gearbox, the vehicle can only be locked by
pressing the parking lock button P.
●
To improve the safety of your vehicle, the
system’s remote control is equipped with a
position sensor. If this remote control does
not detect movement for a certain period of
time, the system will understand that you do
not intend to open the vehicle (e.g. on the
table at night) and will therefore be deactiva-
ted.
Troubleshooting
The Keyless Access system does not work
The operation of the sensor surfaces may be
limited if they are soiled.
●
Clean the sensor surfaces.
All turn signals ash four times
The key that was last used is still inside the
vehicle.
●
Remove the key and lock the vehicle.
Automatic deactivation of the sensor surfa-
ces
The sensor surfaces are deactivated in the fol-
lowing cases:
●
If the vehicle is not unlocked or locked for a
long period of time.
●
If any of the sensor surfaces are activated
unusually often.
To reactivate the sensor surfaces:
●
Unlock the vehicle using the button on the
vehicle key.
NOTICE
The sensor surfaces on the door handles may
activate if hit by a jet of water or high pres-
sure steam if there is a valid vehicle key in
the proximity area. If at least one of the win-
dows is open and the sensor surfaces on one
of the handles permanently activates, all of
the windows will close. If the jet of water or
steam is briey moved away from the sensor
surfaces of one of the handles and redirected
towards them, all of the windows may open.
Note
If the message Keyless system faulty is dis-
played on the instrument cluster display, ab-
normalities may occur in the operation of the
Keyless Access system. Contact a specialised
workshop.
Note
If there is no vehicle key inside the vehicle or
the system fails to detect one, a warning will
display on the instrument cluster screen. This
could happen if another radio frequency sig-
nal (e.g. mobile phone or wireless charger)...
interferes with the key signal or if the key is
covered by another object, e.g. a metal case
104
Opening and closing
Central locking
Introduction
Central locking functions correctly when all the
doors and the rear lid are correctly shut. If the
driver's door is open, the vehicle cannot be
locked with the key.
WARNING
The incorrect use of the central locking sys-
tem may cause serious injuries.
●
The central locking system will lock all
doors. A vehicle locked from the inside can
prevent any non-authorised individual from
opening the doors and accessing the vehicle.
Nevertheless, in case of emergency or acci-
dent, locked doors will complicate access to
the vehicle interior to help the passengers.
●
Never leave children or disabled people
alone in the vehicle. The central locking but-
ton can be used to lock all the doors from
within. Therefore, passengers will be locked
inside the vehicle. Individuals locked in the
vehicle can be exposed to very high or very
low temperatures.
●
Depending on the time of the year, tem-
peratures inside a locked and closed vehicle
can be extremely high or extremely low, re-
sulting in serious injuries and illness or even
death, particularly for young children.
●
Never leave individuals locked in a closed
and locked vehicle. In case of emergency,
they may not be able to exit the vehicle by
themselves or get help.
Description
Central locking allows all doors, the rear lid and
the tank ap to be unlocked centrally:
Hybrid vehicles: the fuel tank ap does not un-
lock with the central locking ›››
page334.
●
From outside, using the vehicle key
›››page105.
●
From outside with the Keyless Access system
›››page101.
●
From inside, by pushing the central locking
button ›››page106.
Self-locking system to prevent involuntary
unlocking
It is an anti-theft system and prevents the un-
intentional unlocking of the vehicle. If the ve-
hicle is unlocked and none of the doors (in-
cluding the luggage compartment) are opened
within 45 seconds, it re-locks automatically.
Automatic locking (Auto Lock)
The vehicle locks automatically at over a speed
of approx. 15 km/h (9 mph). The fuel tank ap
is unlocked so that you can refuel without get-
ting out of the vehicle.
Hybrid vehicles: the fuel tank ap remains
locked ›››page334.
When the vehicle is locked, the control lamp
of the central locking button lights up yellow.
Automatic unlocking (Auto Unlock)
If one of the following conditions is met, all
doors and the rear lid are unlocked automati-
cally:
●
The electronic parking brake is engaged and
the ignition is switched o.
●
EITHER: the inside door handle has been
pulled. This applies when driving at under 15
km/h (9 mph).
●
OR: in the event of an accident and an airbag
has been triggered ›››page107.
Automatic unlocking allows third parties to ac-
cess the interior of the vehicle to provide assis-
tance if necessary.
Turn signals
The turn signals will ash twice when the vehi-
cle is unlocked and once when the vehicle is
locked.
Opening and closing
105
Central locking
If they do not ash, this indicates that one of
the doors, the rear lid or the bonnet is not
closed correctly.
Accidental lock-out
If you have left the key in the vehicle, it cannot
be locked in the following cases:
●
If the driver door is open, the vehicle can-
not be locked with the central locking switch
›››page106.
Lock the vehicle with the remote control key,
when all the doors and the rear lid have been
closed. This prevents the accidental locking of
the vehicle.
Central locking settings
Central locking settings can be changed in the
Infotainment system.
Selective unlocking of the doors
●
Press the function button > Vehicle > Ex-
terior > Opening and closing > Central lock-
ing.
You can decide whether unlocking unlocks all
doors, one door or one side of the vehicle.
One locking action operates all vehicle doors
regardless of the selected unlocking mode.
In all the options, the fuel tank ap is also un-
locked.
With the One door setting, the driver’s door is
unlocked when:
●
The button on the remote control key is
pressed once.
●
OR: It is unlocked once using the key blade.
●
OR: It is unlocked once via Keyless on the
driver’s door handle.
●
OR: It is unlocked by approaching the driv-
er’s door. Automatic unlocking does not occur
when approaching the passenger door.
With the One-side setting, only one side of
the vehicle is unlocked when:
●
The button on the remote control key is
pressed once.
●
OR: It is unlocked once using the key shaft.
●
OR: It is unlocked once via Keyless Access
on the driver’s door handle. If unlocked at the
passenger door, only the passenger side is un-
locked.
●
OR: It is unlocked on the driver’s side by
approaching the driver’s door. It is unlocked
on the passenger side by approaching the pas-
senger door.
Exception: When One door or One side is se-
lected, operating the unlocking point twice in
less than 2 seconds unlocks the whole vehicle.
With the all doors setting, an unlocking action
will unlock all the doors and the rear lid.
Note
●
Never leave any valuable items in the vehi-
cle unattended. Not even a locked vehicle is a
safe.
●
If the LED on the driver door sill lights
up for about 30seconds when the vehicle
is locked, the central locking system or anti-
theft alarm is not working properly. You
should have the fault repaired at a special-
ised CUPRA dealer, SEAT Oicial Service or
specialised workshop.
●
Vehicle interior monitoring by the anti-
theft alarm system will only function as
intended if the windows and sunroof are
closed.
Unlock and lock with the key
Fig.76 Remote control key: buttons.
106
Opening and closing
●
Lock: press the button ›››Fig.76.
●
Locking the vehicle without the “Safe” secur-
ity system: push the button again and hold
for 2 seconds.
●
Unlock: press the button.
●
Unlocking the rear lid: hold down the but-
ton for at least 1 second.
The vehicle will be locked again automatically
if you do not open one of the doors or the
rear lid within 45 seconds after unlocking the
car. This function prevents the vehicle from
remaining unlocked if the unlocking button is
pressed by mistake. This does not apply if you
press the button for at least one second.
Selective unlocking system
The selective unlocking system allows one
door or one side to be unlocked. All other
doors and the rear lid remain locked.
Unlocking the driver's door and tank ap:
●
Press (once) the button on the remote
control key or turn the key once in the opening
direction.
Unlocking all the doors, the rear lid and the
tank ap simultaneously:
●
Within 5 seconds, press (twice) the but-
ton on the remote control key, or turn the key
twice within 5 seconds in the opening direc-
tion.
The “Safe” security system and the anti-theft
alarm deactivate immediately when only the
driver door is opened.
In vehicles with Infotainment system, you can
programme the security central locking system
directly ›››page104.
WARNING
Observe the safety warnings ›››page107,
Safe security system.
Note
●
For safety reasons it is advisable to only ac-
tivate the remote control key when you can
see the vehicle.
●
Other functions of the remote control key
›››
page117, Opening and closing the
windows.
Unlocking and locking from the in-
side
Fig.77 On the centre console: central
locking button
●
Lock: press the button ›››Fig.77.
●
Unlock: Press the button ›››Fig.77 again.
Please note the following when using the cen-
tral locking switch to lock your vehicle:
●
It is not possible to open the doors or the
rear lid from the outside (for safety reasons,
e.g. when stopped at traic lights).
●
The central locking button lamp lights up
when all the doors are closed and locked.
●
You can open the doors individually from the
inside by pulling the inside door handle.
●
The fuel tank ap remains unlocked.
Hybrid vehicles: the fuel cap remains locked
›››
page334.
Opening and closing
107
Central locking
●
In the event of an accident in which the air-
bags inate, doors locked from the inside will
be automatically unlocked to facilitate access
and assistance.
WARNING
●
The central locking button also works with
the ignition switched o, except when the
“Safe” security system is activated.
●
The central locking button does not oper-
ate if the vehicle is locked from the outside
and the security system is switched on.
●
Locked doors could delay assistance in an
emergency. Do not leave anyone, especially
children, in the vehicle.
Note
Your vehicle will lock automatically when it
reaches a speed of approximately 15 km/h
(9 mph) (Auto Lock) ›››page104. You can
unlock the vehicle again using the key of
the central locking button.
“Safe” security system
Depending on its equipment, the vehicle may
be tted with the “Safe” security system.
When the vehicle is locked, the “Safe” security
system puts the door handles out of operation
and hinders possible attempts by people to ac-
cess the vehicle. The doors cannot be opened
from inside ›››
.
The instrument cluster may display an indica-
tion that the “Safe” security system is switched
on.
Disabling the “Safe” security system
The “Safe” security system may be disabled in
any of the following ways:
●
Press the vehicle key button again within 2
seconds.
●
Touch the sensor surface on the outside
of the door handle again within 2 seconds
›››page101.
●
Switch the ignition on.
●
OR: deactivate interior monitoring and the
anti-tow system ›››page109.
Depending on the equipment, before lock-
ing the vehicle temporarily deactivate interior
monitoring and the anti-tow system in the Ve-
hicle settings menu of the infotainment sys-
tem ›››page109.
When the “Safe” security system is deactiva-
ted, the following needs to be taken into ac-
count:
●
The vehicle can be unlocked and opened
from the inside using a door handle.
●
The anti-theft alarm is active ›››page108.
●
The interior monitoring system and the anti-
tow system are disabled ›››page109.
“Safe” status
The ashing frequency of the diode in the
door sill immediately conrms the process. Ini-
tially, the diode ashes in a fast sequence for a
brief period, then it stops for approximately 30
seconds and, lastly continues ashing slowly.
WARNING
Using the “Safe” security system negligently
or without paying due attention can cause
serious injuries in the event of an emergency.
●
Never leave anyone inside the vehicle when
you lock it with the key. When the “Safe” se-
curity system is active the doors cannot be
opened from the inside!
Troubleshooting
The control lamp remains on
The red LED on the driver’s door ashes at
short intervals and then stays on. There is a
fault in the locking system.
●
Contact a specialised workshop. CUPRA rec-
ommends visiting a CUPRA dealership for this
purpose.
108
Opening and closing
The turn signals do not ash
If the turn signals do not ash as a conrma-
tion when the vehicle is locked:
●
At least one door or the rear lid are not
closed or
●
The engine bonnet is not closed.
The vehicle locks automatically
If one of the following conditions is met, the
vehicle re-locks automatically after approx. 45
seconds.
●
The vehicle has been unlocked, but none of
the doors or the rear lid have been opened.
What happens when locking the vehicle with
a second key
They key inside the vehicle is blocked and can-
not be used to start the engine as soon as the
vehicle is locked from the outside with a sec-
ond key. To activate the key inside the vehicle
to allow it to switch on the engine, press its
button.
Locking the vehicle after an airbag is trig-
gered
When an airbag is triggered as a result of
an accident, the vehicle is fully unlocked. De-
pending on the extent of the damage, the ve-
hicle may be relocked after the accident as
described below:
●
Switch the ignition o.
●
Open the driver's door and close it again.
●
Lock the vehicle.
Note
If the 12-volt vehicle battery has little or
no charge, or the vehicle key battery is al-
most or entirely out of charge, you will prob-
ably not be able to lock or unlock the vehi-
cle with the Keyless Access system. The ve-
hicle can be unlocked and locked manually
›››page110.
Note
If there is no vehicle key in the vehicle or
the system does not detect it, a warning will
be displayed on the instrument cluster. This
could happen if any other radio frequency
signal interferes with the key signal or if the
key is covered by another object, e.g. a metal
case.
Anti-theft alarm
Description
Depending on the equipment, the vehicle may
be tted with an anti-theft alarm.
The theft alarm monitors the doors, bonnet
and rear lid.
The anti-theft alarm system activates automat-
ically when the vehicle is locked.
If the vehicle is not opened electronically with
a valid key, the alarm triggers and emits audio
and light signals for a maximum of approx. 5
minutes.
When is the anti-theft alarm triggered?
●
If a mechanically unlocked door is opened
with the vehicle key, you have 15 seconds to
switch on the ignition before the alarm is trig-
gered (depending on markets, the 15 seconds
waiting time disappears and the alarm is trig-
gered immediately when the door is opened).
●
If the bonnet is opened.
●
If the rear lid is opened.
●
If an invalid vehicle key is used.
●
If there are movements inside the ve-
hicle (in vehicles with interior monitoring
›››page109).
●
If the vehicle is lifted or towed (for vehicles
with an anti-tow system ›››page109.
●
If the vehicle is transported on a ferry or by
rail (in vehicles with an anti-tow system or inte-
rior monitoring ›››page109).
●
If the 12-volt battery is disconnected.
●
If the window is broken.
●
When a trailer connected to the theft alarm
system is unhitched.
Opening and closing
109
Anti-theft alarm
Switching o the alarm
●
Unlock the vehicle with the vehicle key un-
locking button .
●
Grip the door handle.
●
Switch the ignition on. Please note: to turn
on the ignition, place the vehicle key in the
area provided for it to perform an emergency
start.
Note
●
After 28 days, the indicator light will be
switched o to prevent the battery from ex-
hausting if the vehicle has been left parked
for a long period of time. The alarm system
remains activated.
●
If, after the audible warning goes o, an-
other monitored area is accessed (e.g. the
rear lid is opened after a door has been
opened), the alarm is triggered again.
●
The anti-theft alarm is not activated when
the vehicle is locked from within using the
central locking button
.
●
If the driver door is unlocked mechanically
with the key, only the driver door is unlocked,
the rest of the doors remain locked. Only
when the ignition has been turned on will the
other doors be available - but not unlocked -
and the central locking button will be activa-
ted.
●
Vehicle monitoring remains active even if
the battery is disconnected or not working
for any reason.
Interior monitoring and anti-tow
system
If movement is detected in the vehicle interior
while the vehicle is locked, the interior moni-
toring triggers the alarm.
If it detects that the vehicle is being lifted, the
anti-tow system triggers the alarm.
Switching on the interior monitoring and the
anti-tow systems
●
Lock the vehicle. When the anti-theft alarm
is activated, the interior monitoring and the
anti-tow system are as well.
Depending on the equipment, the use of a
partition net can aect the operation of the
interior monitoring system.
Temporarily switching o the interior moni-
toring and anti-tow systems
●
Press the button on the remote control
twice. The interior monitoring and the anti-tow
systems will be deactivated. The alarm system
remains activated.
Disconnect through the infotainment sys-
tem
●
Press the function button > Vehicle >
Exterior > Opening/Closing > Central locking
> Interior monitoring.
The interior monitoring and anti-tow system
remain deactivated until the next time the ve-
hicle is locked.
Interior monitoring and the anti-tow system
can also be switched o in the departure
menu. To do this, the ignition must be switched
o ›››
page166.
To avoid false alarms, deactivate interior moni-
toring and the anti-tow system in the following
situations:
●
When people or animals remain inside the
vehicle.
●
When the vehicle is to be loaded onto
another means of transport, transported or
towed.
●
When the vehicle is to be left in a car wash or
is to be parked in a double-decker garage.
Risk of false interior monitoring alarms
The interior monitoring system will only op-
erate correctly if the vehicle is completely
locked. Please bear in mind all legal provisions.
The following situations may cause a false
alarm:
●
If one or more windows are partially or com-
pletely open.
●
If the sliding/tilting roof is partially or fully
open.
110
Opening and closing
●
If light objects are left inside the vehicle, e.g.
loose paper or items hanging from the interior
mirror.
●
If the vibrate function of a mobile left inside
the vehicle is activated.
Note
●
It is not possible to permanently deactivate
the interior monitoring and anti-tow systems.
●
If any doors or the rear lid are open when
the anti-theft alarm is activated, only the
alarm will be activated. The interior monitor-
ing and anti-tow systems will only activate
once all of the doors and the rear lid are
closed.
●
When the interior monitoring and anti-tow
systems are switched o, the “Safe” security
system is also switched o ›››
page107.
Doors
Introduction
The doors and rear lid can be locked manually
and partially opened, for example if the key or
the central locking is damaged.
WARNING
Opening and closing doors carelessly can
cause serious injury.
●
If the vehicle is locked from outside, the
doors and windows cannot be opened from
the inside.
●
Never leave children or disabled people
alone in the car. They could be trapped in the
car in an emergency and will not be able to
get themselves to safety.
●
Depending on the time of the year, tem-
peratures inside a locked and closed vehicle
can be extremely high or extremely low, re-
sulting in serious injuries and illness or even
death, particularly for young children.
WARNING
Getting in the way of the doors and the rear
lid is dangerous and can lead to serious in-
jury.
●
Open and close the doors and the rear lid
only when there is nobody in the way.
NOTICE
In certain weather conditions, ice or snow
may accumulate on the lower front part of
the doors between the door frame and the
door; do not force the doors open until you
are sure that there is no ice or snow.
NOTICE
When opening and closing in an emergency,
carefully disassemble components and then
reassemble them carefully to avoid damage
to the vehicle.
Emergency unlocking or locking of
the driver’s door
Fig.78 Driver’s door handle: hidden lock
cylinder.
Opening and closing
111
Doors
Fig.79 Driver's door handle: pry the cover
open.
If the central locking system should fail to op-
erate, the driver's door can still be locked and
unlocked by turning the key in the lock.
As a general rule, when the driver's door is
locked manually all other doors are locked.
When it is unlocked manually, only the driv-
er's door opens. Please observe the instruc-
tions relating to the anti-theft alarm system
›››
page108.
●
Remove the key blade from the vehicle key
›››page99.
●
Insert the key blade into the lower opening
in the cover on the driver's door handle then
lever in the direction of the arrow ›››
Fig.79.
●
Insert the key blade into the lock cylinder to
unlock or lock the vehicle.
The key blade is inserted by pointing the grip
towards the rear door (the entire key blade en-
ters the cylinder in this position).
Special characteristics
●
The anti-theft alarm will remain active when
vehicles are unlocked ›››page108.
●
After the driver's door is opened, you have 15
seconds to switch on the ignition (depending
on the market). Once this time has elapsed,
the alarm is triggered.
●
Switch the ignition on. The electronic immo-
bilizer recognises a valid vehicle key and deac-
tivates the anti-theft alarm system.
Note
The anti-theft alarm is not activated when
the vehicle is locked manually using the key
blade ›››page104.
Emergency lock of doors without
lock cylinders
Fig.80 Locking the door manually.
If the central locking system fails or the vehi-
cle's battery goes at, doors with no lock cylin-
der will have to be locked separately.
The emergency lock is located on the front of
the front passenger's door and the rear doors.
It can only be seen if the door is open.
●
If necessary, remove the rubber seal from
the front of the door ›››Fig.80.
●
Insert the key in the inside slot and turn it to
the right as far as it will go (if the door is on the
right side) or to the left (if the door is on the
left side).
●
Replace the cap.
112
Opening and closing
Once the door has been closed it can no lon-
ger be opened from the outside. Pull the inte-
rior door handle once to unlock and open the
door.
Child lock
Fig.81 Left door child lock.
The child lock prevents the rear doors being
opened from the inside. Its function is to pre-
vent children from inadvertently opening a sin-
gle door while the vehicle is in motion.
This function is separate from the vehicle's
electronic unlocking/locking systems. It only
works on the rear doors. It can only be acti-
vated and deactivated manually, as described
below.
Activating the child lock
●
Unlock the vehicle and open the door on
which the child safety lock is to be activated.
●
With the door open, turn the slot with
the vehicle key clockwise for the left doors
›››Fig.81 and anticlockwise for the right
doors.
When the child lock is activated, the doors can
only be opened from the outside.
Deactivating the child lock
●
Unlock the vehicle and open the door from
which you want to remove the child lock.
●
With the door open, turn the slot with the
vehicle key anticlockwise for the left doors
›››Fig.81 and clockwise for the right doors.
WARNING
The doors cannot be opened from the inside
when the child lock is activated. This means
that people may be locked inside the vehi-
cle. In an emergency, they may not be able
to leave the vehicle independently or save
themselves.
●
Never leave children or persons in need of
assistance unattended in the vehicle when
the doors are locked.
WARNING
If children, persons requiring assistance or
animals are left unattended inside the vehi-
cle, they could be exposed to very high or
very low temperatures. There is a risk of seri-
ous or fatal injuries.
●
Never leave children, persons in need of
assistance or animals unattended in the vehi-
cle.
Rear lid
Introduction
The rear lid unlocks and locks together with
the doors.
On vehicles with the Keyless Access start/lock-
ing system, the rear lid automatically unlocks
when it is opened ›››
page101.
WARNING
Careless and unsuitable locking, opening and
closing of the rear lid can cause accidents
and serious injury.
●
Do not close the rear lid by pushing it down
with your hand on the rear window. The glass
could smash. Risk of injury!
●
Ensure the rear lid is locked after closing it.
If not, it may open unexpectedly while driv-
ing.
Opening and closing
113
Rear lid
●
Never open or close the rear lid carelessly
or in an uncontrolled manner, as this could
cause serious injuries to you or third parties.
Make sure that no person or object is in the
way of the rear lid as it closes or opens.
●
Never drive with the rear lid open or half-
closed, exhaust gases may penetrate into the
interior of the vehicle. Danger of poisoning!
●
Never open the rear lid if there is cargo,
e.g. bicycles, attached to it. The rear lid may
close by itself due to the additional weight. If
necessary, remove the cargo rst or hold the
rear lid.
●
Never leave the vehicle unattended or al-
low children to play inside or next to it, espe-
cially if the rear lid is open. Children could
enter the luggage compartment, close the
rear lid and become trapped. A locked vehi-
cle can reach extremely high and low tem-
peratures, depending on the time of year,
thus causing serious injuries, illness or even
death.
NOTICE
●
Before opening or closing the rear lid,
make sure that there is enough space to
open or close it, e.g. when pulling a trailer or
in a garage.
●
Never use the rear wiper or rear spoiler to
secure cargo or as a handhold. This could
cause damage that could lead to the break-
age of the rear wiper or spoiler.
Note
Before closing the rear lid, make sure that
the key has not been left inside the luggage
compartment.
Opening and closing the rear lid
Fig.82 Rear lid: opening from the outside.
To lock or unlock the rear lid, press the
or
buttons on the vehicle key.
Manual opening and closing
●
Open: place slight pressure on the handle.
The rear lid opens automatically ›››Fig.82.
●
Close: grip the rear lid by one of the handles
on the interior trim and move it downwards to
close.
If the doors are locked, the rear lid is also
locked.
A warning appears on the instrument cluster
display if the rear lid is open or not properly
closed.
The rear lid locks automatically while driving.
When the outside temperature is around
freezing, the opening mechanism cannot al-
ways raise the rear lid. Lift the rear lid by hand.
Note
If the rear lid is not opened within a few mi-
nutes of being unlocked, it re-locks automat-
ically.
Rear lid with electric opening and
closing
Fig.83 Rear lid: button for closing the rear
lid.
114
Opening and closing
Fig.84 On the driver’s door: button to
open and close the rear lid.
Opening the rear lid
●
Unlock the vehicle and briey press the han-
dle of the rear lid. On vehicles with Keyless Ac-
cess you can directly press the handle of the
rear lid. The rear lid is unlocked if an authorised
key is recognised in the vicinity of the vehicle.
●
EITHER: pull the button on the driver's
door upwards for approx. 1 second ›››Fig.84.
The button also works when the ignition is
switched o.
●
OR: press and hold the button of the vehi-
cle key for approx. 1 second. If the vehicle is
locked, only the rear lid is unlocked (the doors
remain locked).
●
OR: on vehicles with Keyless Access and
sensor-controlled opening you can open the
rear lid by moving one foot in the area of the
sensors located below the rear bumper (Easy
Open ›››
page115). The rear lid will open
automatically.
Closing the rear lid
●
Briey press the button on the rear
lid ›››Fig.83, ››› in Introduction on
page112.
●
OR: pull up and hold the button on the
driver’s door until the rear lid is fully closed
›››Fig.84 (only with the ignition switched on).
●
EITHER: press and hold the button of the
vehicle key until the rear lid closes.
●
OR: on vehicles with Keyless Access and sen-
sor-controlled opening, move a foot in the
area of the sensors located below the rear
bumper (Easy Open ›››page115). The vehi-
cle key must be in the Keyless Access system
detection zone at the rear outside the vehicle.
●
OR: hold the rear lid by one of the handles
tted to the inner lining and close it by moving
it downwards.
●
The rear lid lowers automatically to the nal
position and also locks automatically ››› in
Introduction on page112.
Interrupting opening or closing
After beginning to open or close the rear lid,
the action can be halted by pressing one of the
buttons.
If you press one of the
buttons again, the
rear lid will move again in the original direction.
If the rear lid meets with resistance or an ob-
stacle during the automatic opening or closing,
opening or closing will be interrupted imme-
diately. For the closing process, the rear lid
opens again slightly.
●
Check why it has not been possible to open
or close the rear lid.
●
Try to open or close the rear lid again.
●
If necessary, the rear lid can be opened or
closed by hand using reasonable force.
Particular features if towing a trailer
If the factory-tted towing bracket is electri-
cally connected to a trailer ›››page322, the
electric rear lid can only be opened or closed
with the buttons on the rear lid itself.
Audible warnings
Throughout the process of opening or closing
the rear lid, audible warnings can be heard. Ex-
ception: when the rear lid is opened manually
using the handle or the Easy Open function
with a foot movement or closed using the but-
ton on the rear lid itself ›››Fig.83.
Modifying and saving the opening angle
If the space behind or above the vehicle is less
than the travel area of the rear lid, you can
change the opening angle of the rear lid.
Opening and closing
115
Rear lid
To save a new opening angle, the rear lid must
be open at least halfway.
●
Interrupt the opening process in the desired
position.
●
Press the button ›››Fig.83 on the rear lid
for at least 3 seconds.
The opening angle is saved. The saving proc-
ess is indicated by blinking of the hazard warn-
ing lights and an audible warning.
Resetting and saving the opening angle
For the rear lid to reopen completely, the
opening angle must be reset and resaved.
●
Release the rear lid and open it to the saved
height.
●
Lift the rear lid by hand as far as it goes. To do
this, some force will have to be used.
●
Press the button ›››Fig.83 on the rear lid
for at least 3 seconds.
●
This resets and saves the factory-set opening
angle. The saving process is indicated by blink-
ing of the hazard warning lights and an audible
warning.
Automatic protection against overheating
If the system is operated repeatedly in a short
space of time, it automatically switches o to
prevent overheating.
Once the system is cool again, the function
can be reused. Until then, the rear lid can only
be opened and closed by hand using reasona-
ble force.
If the vehicle battery is disconnected
›››page367 or the corresponding fuse burns
out ›››page348while the rear lid is open,
the system will have to be reset. This requires
closing the rear lid completely once.
WARNING
If a lot of snow builds up on the rear lid or it
is heavily loaded, the rear lid may not open
or, after opening, it may lower by itself due to
the extra weight and cause serious injury.
●
Do not open the rear lid when there is a lot
of snow on it or when carrying a load (e.g. on
a rack).
●
Before opening the rear lid, remove the
snow or the load.
Rear lid with sensor-controlled
opening and closing (Easy Open)
Fig.85 Rear lid with sensor-controlled
opening (EasyOpen).
Fig.86 Lower sensor detection area.
If there is a valid vehicle key in the proximity of
the rear lid, it is possible to unlock and open
or close it moving one foot in the area of the
sensors located under the rear bumper.
116
Opening and closing
●
Switch the ignition o.
●
Stand in front of the rear bumper, in the mid-
dle.
●
With a brisk movement, bring your foot and
lower leg as close as you can to the bumper.
The lower part of the leg needs to be close
to the upper sensor area and your foot to the
lower sensor area ›››Fig.85
1
.
●
Quickly remove your foot and lower leg from
the sensor areas ›››Fig.85
2
. The rear lid will
open automatically.
●
If the rear lid fails to open, repeat the pro-
cedure after a few seconds. The detection
zone of the lower sensor may not have been
reached ›››Fig.86.
The rear lid can be closed with another foot
movement similar to the opening one (provi-
ded a valid vehicle key is in the proximity of the
rear lid).
When closed, the rear lid automatically locks
if the vehicle has been locked beforehand and
there is no valid key inside.
While the rear lid is in motion (either opening
or closing), it can be stopped with another foot
movement similar to the opening one (provi-
ded a valid vehicle key is in the proximity of the
rear lid).
The Easy Open feature is not available or only
has limited availability in the following situa-
tions (examples):
●
If the rear bumper is very dirty.
●
If the rear bumper is wet with salt water, e.g.
after having driven on gritted roads.
●
If the vehicle has been equipped at a later
time with a tow bracket.
In the event of heavy rain, the EasyOpen fea-
ture may take a little longer to open the boot
or may deactivate automatically, to avoid the
boot opening by accident, e.g. because of the
running water.
The Easy Open function can be switched on
and o permanently in the infotainment sys-
tem using the button > Vehicle > Exterior >
Opening/Closing > Central locking.
WARNING
If there is a valid key in the proximity of the
rear lid, in some cases the Easy Open func-
tion may be accidentally activated and the
rear lid will open, for example, when sweep-
ing under the rear bumper, when directing a
water jet or high pressure steam to the area
or when carrying out maintenance work or
repairs in that area. If accidentally opened,
the rear lid could injure somebody situated in
its area of operation or cause material dam-
age.
●
Therefore, always make sure that there is
no unsupervised valid key in the area near
the rear lid.
●
Before carrying out any maintenance or re-
pair work on the vehicle, always disable the
Easy Open feature via the infotainment sys-
tem.
●
Before washing the vehicle, always disable
the Easy Open function via the infotainment
system.
●
Before attaching a bike rack or hitching a
trailer ›››page322, always disable the Easy
Open function via the infotainment system.
Opening and closing
117
Window controls
1
2
3
4
5
Window controls
Opening and closing the windows
Fig.87 Detail of the driver's door: window
controls.
●
Open the window: press button
●
Close the window: pull button
Buttons on the driver’s door
Left-hand front door window
Right-hand front door window
Left-hand rear door window
Right-hand rear door window
Safety control for deactivating the window
control buttons on the rear doors
Both front and rear windows can be operated
from the controls on the driver's door. The
other doors have a separate control for each
window.
Always close the windows completely when the
vehicle is parked or out of sight ››› .
You can use the electric windows for approx.
10 minutes after switching o the ignition if
neither the driver’s door nor the front passen-
ger door have been opened and the ignition
key has not been removed (depending on the
equipment).
Safety switch
The safety control ›››Fig.87
5
on the driv-
er's door can be used to disable the electric
window buttons on the rear doors.
Safety control not pressed: the buttons on the
rear doors are activated.
Safety control pressed: the buttons on the rear
doors are deactivated.
The safety control symbol
lights up in yellow
if the buttons on the rear doors are switched
o.
Comfort opening and closing
The windows can be opened and closed from
the outside using the vehicle key:
Convenience opening:
●
Press and hold the button on the remote
control key until all the windows and the sun-
roof have reached the desired position.
●
OR: First unlock the vehicle using the but-
ton on the remote control key and then keep
the key in the driver's door lock until all the
windows and the sunroof have reached the re-
quired position.
Convenience closing:
●
Press and hold button on the remote con-
trol key until all the windows and the sunroof
are closed ››› .
●
OR: Keep the key in the driver's door in the
"lock" position until all the windows and the
sunroof are closed.
●
OR: using the Keyless Access system (only
locking): Press and hold the locking sensor sur-
face ›››Fig.89 (arrow) on the door handle
for several seconds to close the windows and
the sunroof. If you stop touching the sensing
surface, the locking function is interrupted.
Comfort locking closes the windows rst and
then the panoramic sunroof.
In the infotainment system dierent settings
can be adjusted using the function button >
Vehicle > Exterior > Windows > Convenience
opening.
118
Opening and closing
One-touch opening and closing
Automatic raising and lowering fully opens and
closes the windows. It is not necessary to press
and hold the appropriate window button for
this purpose.
For the automatic raising function: pull the
button for the corresponding window upwards
until it reaches the second position.
For the automatic lowering function: push the
button for the corresponding window down-
wards until it reaches the second position.
Stop automatic movement: push or pull on the
button of the corresponding window.
Resetting the automatic raising/lowering
function
If the 12-volt battery is disconnected or dis-
charged when the windows are not completely
closed, the electric window automatic raising
and lowering function deactivates and has to
be reset:
●
Switch the ignition on.
●
Close all doors and windows.
●
Pull the corresponding window button up-
wards and hold it in this position for a few sec-
onds.
●
Release the button, pull it up again and hold
it in this position. This resets the automatic
raising and lowering function.
The function can be reset for a single window
or for several windows at the same time.
WARNING
Observe the safety warnings ››› in Intro-
duction on page110.
●
Improper use of the power windows can
cause injury.
●
Never close windows carelessly or in an un-
controlled manner, as this could cause seri-
ous injuries to you or third parties. Therefore,
make sure that no one is in the way of the
moving windows.
●
If the ignition is switched on, electrical
equipment such as the power windows could
activate, which can cause injury.
●
The vehicle doors can be locked with the
remote control key, making it diicult to get
help in an emergency.
●
Therefore always take the key with you
when you leave the vehicle.
●
The power windows are only deactivated
when the ignition is switched o and one of
the front doors is opened.
●
If necessary, deactivate the rear power
windows with the safety control. Make sure
that they have actually been deactivated.
●
For safety reasons, you should only unlock
and lock the vehicle with the remote control
key when you are approximately 2 metres
away from the vehicle. When pressing the
lock button, always monitor the movement
of the windows to avoid accidents. Releasing
the button immediately interrupts the clos-
ing process.
Note
If the window is not able to close because
it is sti or because of an obstruction,
the window will automatically open again
›››page118. In this case, check why the
window could not be closed before trying
again.
Window anti-trap function
The roll-back function reduces the risk of in-
jury when the power windows close.
If a window encounters resistance or an obsta-
cle when closing, it will reopen immediately
›››
.
●
Check why the window does not close.
●
Try closing the window again.
●
If the closing process is interrupted again,
the anti-trap function stops working for a few
seconds.
●
If the window still cannot be closed, it will
stop in the corresponding position. Pulling
the button again within a few seconds closes
the window without the anti-trap function
››› .
Opening and closing
119
Sunroof
Closing the windows without the anti-trap
function
●
Try to close the window again by pulling the
button without releasing it, within a few sec-
onds. The anti-trap function will be deacti-
vated!
●
If the closing process takes longer than a
few seconds, the anti-trap function is activated
again. The window will stop again if it encoun-
ters resistance or an obstacle, and will reopen
automatically.
●
If the window will still not close, visit a speci-
alised workshop.
WARNING
Observe the safety warnings ››› in Open-
ing and closing the windows on page118.
●
The roll-back function does not prevent
ngers or other parts of the body getting
pinched against the window frame. Risk of
accident.
Note
The anti-trap function also works when the
windows are closed with the comfort func-
tion using the vehicle key.
Sunroof
Introduction
The sunroof consists of two glass parts. The
rear part is xed and cannot be opened. It also
has a sun blind.
The sunroof only works when the ignition
is switched on. Once the ignition has been
switched o, you can still open or close the
sunroof for a few minutes provided the driver
door and the front passenger door are not
opened.
WARNING
If the sunroof is used negligently or without
paying due attention, it can cause serious in-
jury.
●
Open or close the sunroof and the sun
blind only when no one is in their path of
movement.
●
Never leave any key inside the vehicle
when exiting.
●
Never leave a child or any other person
who may need help in the vehicle, especially
if they have access to the vehicle key. If using
they key unattended, they could lock the ve-
hicle, start the engine, switch on the ignition
and activate the sunroof.
●
After switching o, it is still possible to
open or close the sunroof during a short
space of time provided that neither the
driver nor passenger door is opened.
NOTICE
●
To prevent damage, during winter temper-
atures remove any ice or snow that might be
on the car roof before opening the sunroof
or adjusting the tilt position.
●
Before leaving the vehicle or in case of
rainfall, always close the sunroof. With the
sunroof open or in a tilted position, water can
enter the interior and can cause considera-
ble damage to the electrical system. As a re-
sult, other damage can occur in the vehicle.
Note
●
Leaves and other loose objects that accu-
mulate on the sunroof rails should be regu-
larly cleaned away either by hand or with a
vacuum.
●
If the sunroof does not work correctly, the
anti-trap function will not work either. Con-
tact a specialised workshop.
120
Opening and closing
Operating the sunroof
Fig.88 On the headliner: glass roof
button.
The functional area
can be operated in two
ways: by sliding and pressing.
●
Sliding: The roof is opened or closed totally
or partially.
●
Pressing: The roof is raised, opened or
closed totally or partially. Press again to stop
the automatic movement.
Raising, opening and closing the sunroof
Opening the sunroof:
●
Automatic movement: slide your nger back
over the functional area ›››Fig.88
A
.
●
Manual movement: slide back over the func-
tional area and hold it there.
Closing the sunroof:
●
Automatic movement: slide your nger for-
ward over the functional area
A
.
●
Manual movement: slide forward over the
functional area and hold it there.
Raise the sunroof (it is only possible to raise the
sunroof if it is closed):
●
Automatic movement: press briey in the
centre of the functional area
B
Closing the sunroof when raised:
●
Automatic movement: slide your nger for-
ward over the functional area
A
.
●
Or press briey in the centre of the func-
tional area
B
.
Stop the automatic opening or closing move-
ment:
●
Press the functional area again
A
.
Convenience function to open or
close the sunroof
Fig.89 Door handle: sensor surface.
The sunroof can be opened and closed with
the convenience function, just like the win-
dows.
Using the door lock
●
Hold the key in the door lock of the driver
door in either the unlocking or locking position
to open or close the roof in the tilted position.
Release the key to interrupt this function.
Using the remote control
●
Keep the locking or unlocking button
pressed to open or close the roof. If you re-
lease the button is the opening or closing will
stop.
Opening and closing
121
Sunroof
Using the Keyless Access system (only lock-
ing)
Press and hold the locking sensor surface
›››Fig.89 (arrow) on the door handle to close
the sunroof. If you stop touching the sensing
surface, the locking function is interrupted.
Anti-trap function of the panor-
amic sunroof
The anti-trap function can reduce the risk of
injury when closing the sunroof ›››
. If the
sunroof encounters resistance or an obstacle
when closing, it reopens immediately.
●
Check why the sunroof did not close.
●
Try to close the sunroof again.
●
If the sunroof cannot be closed due to an
obstacle or some resistance, it stops at the
corresponding position and then reopens. For
automatic closing, a new closing attempt might
take place.
●
If the sunroof is still unable to close, close it
without the anti-trap function.
Closing the sunroof without the anti-trap
function
●
Before approx. 5 seconds after activation of
the anti-trap function, slide your nger forward
over the functional area ›››Fig.88
A
and
keep pressed until the sunroof is fully closed.
●
The sunroof closes without the anti-trap
function intervening!
●
If the sunroof will still not close, visit a speci-
alised workshop.
WARNING
Closing the sunroof without the anti-trap
function can cause serious injuries.
●
Always be careful when closing the sun-
roof.
●
No person should ever remain in the way of
the sunroof, especially when closing without
the anti-trap function.
●
The anti-trap function does not prevent
ngers or other parts of the body from be-
coming trapped against the roof frame and
injuries occurring.
Glass roof sun blind
Fig.90 On the headliner: operate the sun
blind.
Opening or closing the sun blind
Automatic movement:
●
Swipe backwards or forward over the func-
tional area ›››Fig.90.
Manual movement:
●
Swipe backwards or forward over the func-
tional area and press and hold.

Related Topics

Popular Owner Manuals