2024-2026 Cupra Terramar SUV Opening and closing -> Set of vehicle keys User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Opening and closing -> Set of vehicle keys for Your Cupra Terramar SUV First Generation (2024-2026)

98
Opening and closing
1
2
3
4
5
Opening and closing
Set of vehicle keys
Vehicle key
Fig.69 Vehicle key
Fig.70 Centre console: vehicle key housing.
Unlocks the vehicle.
Locks the vehicle.
Unlocks only the rear lid.
Press the button until all the turn signals
on the vehicle ash briey.
You have 2 minutes to open the rear lid.
Once this time has passed, it will lock
again. In addition, the lamp on the key
ashes.
Control lamp.
Alarm button. Only press in the event of
an emergency! When the alarm button is
pressed, the vehicle's horn sounds and the
turn signals light up for a short time. Press
again to disconnect.
The vehicle can be locked and unlocked from a
distance using the vehicle key ›››
page105.
The vehicle key includes an emitter and bat-
tery. The receiver is in the interior of the ve-
hicle. The range of the vehicle key with re-
mote control and new battery is several metres
around the vehicle.
If it is not possible to open or close the vehicle
using the remote control key, this should be
re-synchronised ›››page100 or the battery
changed ›››page100.
Dierent keys belonging to the vehicle may be
used.
Control lamp on the vehicle key
When a button is pressed briey on the vehicle
key, the control lamp
4
›››
Fig.69 ashes
once briey, but if pressed for a long period
of time, it will ash several times, for example,
when using the comfort opening.
If the vehicle key control lamp does not light up
when the button is pressed, replace the key's
battery ›››page100.
Key housing
Depending on the version, there is a housing
for the key close to the start button ›››Fig.70.
Warning! Do not confuse with the location for
the emergency start ›››page169.
Spare key
To obtain a spare key and other vehicle keys,
the vehicle chassis number is required.
Each new key contains a microchip which must
be coded with the data from the vehicle's elec-
tronic immobiliser. A vehicle key will not work
if it does not contain a microchip or the micro-
chip has not been encoded. This is also true
for keys which are specially cut for the vehicle.
The vehicle keys or new spare keys can be
obtained from a specialised CUPRA dealer or
SEAT Oicial Service, a specialised workshop
or an approved key service qualied to create
this kind of key.
Opening and closing
99
Set of vehicle keys
New keys or spare keys must be synchronised
before use ›››page100.
WARNING
●
Never leave children or disabled persons in
the vehicle. In case of emergency, they may
not be able to leave the vehicle or manage on
their own.
●
An uncontrolled use of the key by third
parties could activate a piece of electrical
equipment (e.g. power windows), with the re-
sulting accident hazard. The vehicle doors
can be locked with the remote control key,
making it diicult to get help in an emer-
gency.
●
Never leave the keys inside the vehicle. An
unauthorised use of your vehicle could result
in injury, damage or theft. Therefore always
take the key with you when you leave the ve-
hicle.
NOTICE
Do not leave the key near the Wireless
Charger area as this may cause interference.
NOTICE
All of the vehicle keys contain electronic
components. Protect them from damage,
impacts and humidity.
Note
●
Only use the key button when you re-
quire the corresponding function. Pushing
the button unnecessarily could accidentally
unlock the vehicle or trigger the alarm. It is
also possible even when you are outside the
radius of action.
●
Key operation can be greatly inuenced by
overlapping radio signals close to the vehicle
working in the same range of frequencies,
for example, radio transmitters or mobile tel-
ephones.
●
Obstacles between the remote control and
the vehicle, bad weather conditions and dis-
charged batteries can considerably reduce
the range of the remote control.
●
If the buttons of the vehicle key are
pressed or one of the central locking but-
tons ›››
page106 is pressed repeatedly in
short succession, the central locking briey
disconnects as protection against overload-
ing. The vehicle is then unlocked. Lock it if
necessary.
●
Spare remote control keys are available at
your Technical Service, where they must be
matched to the locking system.
Pulling out the key blade
Fig.71 Vehicle key: remove the key blade.
The central locking remote control has the
key blade inside it for use in case of emer-
gency locking/unlocking of the driver's door
›››
page110.
●
Press the ›››Fig.71
1
button to release the
ring from the key fob and remove the key blade
2
. Pressing lightly on the ring leaves it xed as
a key fob.
●
Press the ›››Fig.71
1
button to unlock.
Press and hold button
1
and at the same time
pull on the ring in the direction of the arrow
›››
Fig.71
2
to completely remove the key
blade.
100
Opening and closing
Changing the battery
Fig.72 Vehicle key: open the battery
compartment cover.
Fig.73 Vehicle key: removing the battery.
CUPRA recommends you ask a specialised
workshop to replace the battery.
The battery is located at the back of the vehi-
cle key, under a cover.
Changing the battery
●
Remove the key blade from the vehicle key
›››page100.
●
Insert the key blade into the slot ›››Fig.72,
press it in the direction of the arrow
1
and
detach the cover by levering it
2
.
●
Remove the battery from the compartment
with a suitable thin object ›››Fig.73.
●
Insert the new battery and press it into the
battery compartment ››› .
●
Place the cover and press it into the vehicle
key housing until it clicks into place.
WARNING
Swallowing a battery with a diameter of 20
mm or any other button battery can cause
serious injuries or even death within a very
short time.
●
Keep the vehicle key and key fobs with bat-
teries out of reach of children.
●
If you suspect that someone may have
swallowed a battery, seek medical attention
immediately.
NOTICE
●
If the battery is not changed correctly, the
vehicle key may be damaged.
●
Use of unsuitable batteries may damage
the vehicle key. For this reason, always re-
place the dead battery with another of the
same voltage, size and specications.
●
When tting the battery, check that the
polarity is correct.
For the sake of the environment
Please dispose of your used batteries cor-
rectly and with respect for the environment.
Synchronize the vehicle key
If the
button is pressed frequently outside of
the vehicle range, it is possible that the vehicle
can no longer be locked or unlocked using the
key. In this case, the key must be resynchron-
ised as described below:
●
Stand next to the vehicle.
●
Briey press the button on the vehicle key
twice.
OR:
●
Remove the emergency key ›››page98.
●
Press the button on the key.
●
Unlock the vehicle with the emergency key.

Related Topics

Popular Owner Manuals