2024-2026 Cupra Terramar SUV Opening and closing -> Keyless Access system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Opening and closing -> Keyless Access system for Your Cupra Terramar SUV First Generation (2024-2026)

102
Opening and closing
One-time deactivation of automatic locking:
1. Press and hold the button for more than
2 seconds with the door open.
Automatic locking will not be available until
the next time the vehicle is intentionally
locked.
The vehicle is only locked if all doors and
the rear lid are closed. If this option has
been activated in the vehicle settings, an
audible warning may be heard to indicate
that a door is open.
In vehicles tted with the “Safe” security sys-
tem, when the vehicle is locked while walking
away from it, it locks without the “Safe”func-
tion. This is indicated to the user by an audible
signal. The vehicle’s “Safe” system is only acti-
vated after intentionally locking using the door
handle or contact key.
If the key is in the detection zone around the
vehicle for a prolonged period of time, the op-
tions for locking when you walk away from the
vehicle and unlocking when you approach it
may work in a limited manner.
Note
If the vehicle is parked for a prolonged period
of time without being used, it can only be
unlocked via the sensor surface inside the in-
terior of the driver's door handle or with the
contact key.
Unlocking the vehicle on approach
The vehicle can be unlocked by approaching it.
For this to work, the function must be activated
in the infotainment system and the vehicle key
must be in the vehicle's approach area.
●
The vehicle is unlocked when the vehicle key
is detected nearby ›››Fig.74. All turn signals
ash twice.
If the vehicle is not unlocked for an exten-
ded period of time, the “Unlock vehicle when
approaching it” function is deactivated. This
function reactivates when the vehicle is locked
again.
When activating the unlocking function for
certain doors in the central locking settings in
the infotainment system, it is possible that the
“Unlock vehicle when approaching” function
will only work to a limited extent.
Unlocking the rear lid
When the vehicle is locked and the “Keyless
Access” function is active, the rear lid auto-
matically unlocks when it is opened if there is
a vehicle key in its proximity zone. The rear lid
locks again after closing.
If the central locking of all doors and the un-
lock when approaching function in “Keyless
Access” are active, the vehicle remains un-
locked after the rear lid is closed. The vehicle
does not lock automatically
Temporarily deactivating the Keyless Access
system
The “Keyless Access” system’s unlocking func-
tion can be temporarily deactivated:
●
Move the gear lever to position P since oth-
erwise the vehicle cannot be locked.
●
Lock the vehicle using the button on the
vehicle key.
●
Within 5 seconds, touch the sensor on the
outside of the door handle once ›››Fig.75
B
. Do not grip the handle while doing so. This
temporarily deactivates the Keyless Access sys-
tem.
●
Check that it is deactivated by pulling on the
door handle after at least 10 seconds. It should
not be possible to open the door.
The next time, the vehicle can only be un-
locked electronically with the vehicle key. After
being unlocked the next time, the Keyless Ac-
cess system will be activated again ››› .
Permanently disabling the Keyless Access
system
The Keyless Access system can also be perma-
nently deactivated in the infotainment system
››› .
Opening and closing
103
Keyless Access system
Comfort functions
To close all the electric windows and the sun-
roof using the comfort function, keep a nger
for a few seconds on the locking sensor sur-
face
B
of the door handle until the windows
and roof have closed.
How the doors open when touching the sen-
sor surface on the door handle will depend on
the settings that have been activated in the
infotainment system, using the function button
> Vehicle > Exterior > Opening/Closing.
NOTICE
Deactivating the Keyless Access system also
deactivates the sensor controlled opening
and closing of the rear lid, although the func-
tion is shown as “active” in the vehicle menu.
Note
●
Depending on the function set on the info-
tainment system for the mirrors, the exterior
mirrors will unfold and the surround lighting
will come on when unlocking the vehicle us-
ing the sensor surface on the driver and pas-
senger door handles.
●
If the vehicle is tted with an automatic
gearbox, the vehicle can only be locked by
pressing the parking lock button P.
●
To improve the safety of your vehicle, the
system’s remote control is equipped with a
position sensor. If this remote control does
not detect movement for a certain period of
time, the system will understand that you do
not intend to open the vehicle (e.g. on the
table at night) and will therefore be deactiva-
ted.
Troubleshooting
The Keyless Access system does not work
The operation of the sensor surfaces may be
limited if they are soiled.
●
Clean the sensor surfaces.
All turn signals ash four times
The key that was last used is still inside the
vehicle.
●
Remove the key and lock the vehicle.
Automatic deactivation of the sensor surfa-
ces
The sensor surfaces are deactivated in the fol-
lowing cases:
●
If the vehicle is not unlocked or locked for a
long period of time.
●
If any of the sensor surfaces are activated
unusually often.
To reactivate the sensor surfaces:
●
Unlock the vehicle using the button on the
vehicle key.
NOTICE
The sensor surfaces on the door handles may
activate if hit by a jet of water or high pres-
sure steam if there is a valid vehicle key in
the proximity area. If at least one of the win-
dows is open and the sensor surfaces on one
of the handles permanently activates, all of
the windows will close. If the jet of water or
steam is briey moved away from the sensor
surfaces of one of the handles and redirected
towards them, all of the windows may open.
Note
If the message Keyless system faulty is dis-
played on the instrument cluster display, ab-
normalities may occur in the operation of the
Keyless Access system. Contact a specialised
workshop.
Note
If there is no vehicle key inside the vehicle or
the system fails to detect one, a warning will
display on the instrument cluster screen. This
could happen if another radio frequency sig-
nal (e.g. mobile phone or wireless charger)...
interferes with the key signal or if the key is
covered by another object, e.g. a metal case

Related Topics

Popular Owner Manuals