2024-2026 Cupra Terramar SUV Safety User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety for Your Cupra Terramar SUV First Generation (2024-2026)

Safety
43
Safe driving
Safety
Safe driving
Safety rst!
WARNING
●
This manual contains important informa-
tion about the operation of the vehicle,
both for the driver and the passengers. The
other sections of the on-board documenta-
tion also contain further information that
you should be aware of for your own safety
and for the safety of your passengers.
●
Ensure that the on-board documentation
is kept in the vehicle at all times. This is espe-
cially important when lending or selling the
vehicle to another person.
Before driving
For your own safety and the safety of your
passengers, always note the following points
before every trip:
●
Make sure that the vehicle's lights and turn
signals are working properly.
●
Check tyre pressure.
●
Ensure that all windows provide a clear and
good view of the surroundings.
●
Make sure all luggage is secured
›››page314.
●
Make sure that no objects can interfere with
the pedals.
●
Adjust front seat, headrest and mirrors prop-
erly according to your size.
●
Ensure that the passengers in the rear seats
always have the headrests in the in-use posi-
tion ›››page126.
●
Instruct passengers to adjust the headrests
according to their height.
●
Protect children with appropriate child seats
and properly fastened seat belts ›››page62.
●
Assume the correct sitting position. Instruct
your passengers also to assume a proper sit-
ting position ›››page44.
●
Fasten your seat belt securely. Instruct your
passengers also to fasten their seat belts prop-
erly ›››page46.
Factors inuencing safety
As a driver, you are responsible for yourself and
your passengers.
●
Always pay attention to traic and do not get
distracted by passengers or telephone calls.
●
Never drive when your driving ability is im-
paired (e.g. by medication, alcohol, drugs).
●
Observe traic laws and speed limits.
●
Always reduce your speed as appropriate for
road, traic and weather conditions.
●
When travelling long distances, take breaks
regularly - at least every two hours.
●
If possible, avoid driving when you are tired
or stressed.
WARNING
Driving under the inuence of alcohol, drugs,
medication or narcotics may result in severe
accidents and even loss of life.
●
Alcohol, drugs, medication and narcotics
may signicantly alter perception, aect re-
action times and safety while driving, which
could result in the loss of control of the vehi-
cle.
Safety equipment
Never put your safety or the safety of your pas-
sengers in danger. In the event of an accident,
the safety equipment may reduce the risk of
injury. The following points cover part of the
safety equipment in your CUPRA:
●
Optimised seat belts for all seats.
●
Seat belt tensioners on the driver, front pas-
senger and rear side seats.
●
Seat belt force limiters on the driver, front
passenger and rear side seats.
●
Red warning lamp and, if applicable, seat
belt status indication.
●
Belt height adjustment for the front seats.
●
Front airbags for driver and passenger.
44
Safety
1)
The front seats with built-in headrests do not require adjustment.
●
Side airbags for driver and passenger.
●
Head airbags on both sides of the vehicle.
●
Central airbag between the driver and front
passenger.
●
Yellow airbag control lamp .
●
Yellow warning lamp on
the roof console.
●
Yellow warning lamp on
the roof console.
●
Control units and sensors.
●
Optimised and height-adjustable headrests
1)
.
●
Adjustable steering column.
●
ISOFIX/i-Size anchor points for child seats.
●
Child seat top tether attachment points.
The safety equipment mentioned above works
together to provide you and your passengers
with the best possible protection in the event
of an accident. However, these safety systems
can only be eective if you and your passen-
gers are sitting in a correct position and use
this equipment properly.
Safety is everybody's business.
Correct sitting position of
vehicle occupants
Correct position on the seat
Fig.17 The correct distance between the
driver and the steering wheel must be at
least 25 cm (10 inches).
Fig.18 Correct belt web and headrest
positions
The correct sitting positions for the driver and
passengers are shown below.
If your physical constitution prevents you from
maintaining the correct sitting position, con-
tact a specialised workshop for help with
any special devices. The seat belt and airbag
can only provide optimum protection if a cor-
rect sitting position is adopted. CUPRA recom-
mends taking your car in for technical service.
For your own safety and to reduce the risk of
injury in the event of an accident or sudden
braking or manoeuvre, CUPRA recommends
the following positions:
Safety
45
Correct sitting position of vehicle occupants
1)
On seats with adjustable headrests.
Valid for all vehicle occupants:
●
Adjust the head restraint so that its upper
edge is, as far as possible, at the same level
as the top of your head, as close to eye level
as possible
1)
›››
page126. Keep the back of
your neck as close as possible to the headrest
›››Fig.18.
●
Always keep your feet in the footwell while
the vehicle is in motion.
●
Adjust and fasten your seat belt correctly
›››page46.
The following also applies to the driver:
●
Move the seat backrest to an almost upright
position so that your back rests completely
against it.
●
Adjust the steering wheel so that it is at a
distance of at least 25 cm (10 inches) from the
sternum ›››Fig.17 and you can hold it with
both hands on the sides, on the outside, with
your arms slightly exed.
●
The steering wheel must always point to-
wards the chest and never towards the face.
●
Adjust the seat lengthwise so that you can
press the pedals fully down with your knees
slightly bent and there is a distance between
the knee area and the instrument cluster of at
least 10 cm (4 inches) ›››
Fig.18.
●
Adjust the height of the seat so that you can
reach the top of the steering wheel.
●
Always keep both feet in the footwell so that
you have the vehicle under control at all times.
For the passenger, the following applies:
●
Move the seat backrest to an almost upright
position so that your back rests completely
against it.
●
Move the seat as far back as possible (min-
imum 25 cm between the chest and the in-
strument cluster. If you are sitting closer than
25 cm, the airbag system cannot protect you
properly.
Number of seats
The vehicle has 5 seats, 2 in the front and 3 in
the rear. All seats are tted with a safety belt.
Check the oicial documentation for the num-
ber of occupants approved for your vehicle.
WARNING
Sitting in an incorrect position may increase
the risk of severe or fatal injuries in the event
of sudden braking or manoeuvring, in case
of collision or accident and if the airbags de-
ploy.
●
Before starting the car, all passengers must
be sitting in a correct position and stay like
that for the entire journey. This also applies
to a correct use of the seat belt.
●
The maximum number of people in the ve-
hicle is the same as the number of seats with
seat belts.
●
For children, always use a protection sys-
tem that is approved and suited for their
weight and height ›››page62.
●
While driving, always keep your feet in the
footwell. Never place them on the seat or
the dash panel, for example, or outside the
window. Otherwise the airbag and seat belt
may oer insuicient protection and also in-
crease the risk of injury in the event of an
accident.
Risks of sitting in an incorrect posi-
tion
If seat belts are worn incorrectly or not at all,
the risk of severe or fatal injuries increases.
Seat belts can provide optimal protection only
if the belt web is properly worn. Incorrect sit-
46
Safety
ting positions substantially reduce the protec-
tive function of seat belts and, therefore, in-
crease the risk of severe or even fatal injuries.
The risk of severe or fatal injuries is especially
heightened when a deploying airbag strikes a
vehicle occupant who has assumed an incor-
rect sitting position. The driver is responsible
for all people, particularly children, inside the
vehicle.
The following list contains examples of incor-
rect sitting positions that could be dangerous
for all vehicle occupants.
When the vehicle is in motion:
●
Never stand in the vehicle.
●
Never stand on the seats.
●
Never kneel on the seats.
●
Never tilt your seat backrest too far to the
rear.
●
Never lean against the dash panel.
●
Never lie on the rear seats.
●
Never sit on the front edge of a seat.
●
Never sit sideways.
●
Never lean out of a window.
●
Never put your feet out of a window.
●
Never put your feet on the dash panel.
●
Never place your feet on the bench or on the
backrest of the seat.
●
Never travel in a footwell.
●
Never sit on the armrests.
●
Never travel without wearing the seat belt.
●
Never travel in the luggage compartment.
WARNING
Sitting in an incorrect position increases the
risk of severe or fatal injuries in the event
of accidents and sudden braking or manoeu-
vres.
●
All occupants must sit correctly during the
journey and wear the seat belt correctly.
●
Vehicle occupants that are not sitting cor-
rectly, not wearing the seat belt or are not at
a proper distance of the airbag risk suering
very serious or fatal injuries, especially if the
airbags deploy and strike them.
Seat belts
Introduction
Fig.19 Drivers with properly worn seat
belts will not be thrown forward in the event
of sudden braking.
Properly worn seat belts hold the occupants
in the proper position. They also help prevent
uncontrolled movements that may result in se-
rious injury and reduce the risk of being thrown
out of the vehicle in case of an accident.
Vehicle occupants wearing their seat belts cor-
rectly benet greatly from the ability of the
belts to absorb kinetic energy. In addition, the
front part of your vehicle and other passive
safety features (such as the airbag system) are
designed to absorb the kinetic energy released
in a collision. Taken together, all these features
reduce the released kinetic energy and conse-
Safety
47
Seat belts
quently, the risk of injury. This is why it is so
important to fasten seat belts before every trip,
even when "just driving around the corner".
Ensure that your passengers wear their seat
belts as well. Accident statistics have shown
that wearing seat belts is an eective means of
substantially reducing the risk of injury and im-
proving the chances of survival when involved
in a serious accident. Furthermore, properly
worn seat belts improve the protection provi-
ded by airbags in the event of an accident. For
this reason, wearing a seat belt is required by
law in most countries.
Although your vehicle is equipped with airbags,
the seat belts must be fastened and worn. The
front airbags, for example, are only triggered in
some cases of head-on collision. The front air-
bags will not be triggered during minor head-
on or side collisions, rear-end collisions, over-
turns or accidents in which the airbag trigger
threshold value in the control unit is not ex-
ceeded.
Important safety instructions for the use of
seat belts
●
Always wear the seat belt as described in this
section.
●
Ensure that the seat belts can be fastened at
all times and are not damaged.
WARNING
●
If seat belts are worn incorrectly or not at
all, the risk of severe or fatal injuries increa-
ses. The optimal protection from seat belts
can be achieved only if you use them prop-
erly.
●
Never allow two passengers (even children)
to share the same seat belt.
●
Never unbuckle a seat belt while the vehi-
cle is in motion. Risk of fatal injury.
●
The seat belt should never lie on hard or
fragile objects (such as glasses or pens, etc.)
because this can cause injuries.
●
Do not allow the seat belt to be damaged or
jammed, or to rub on any sharp edges.
●
Never wear the seat belt under the arm or
in any other incorrect position.
●
Bulky and unfastened clothing (such as an
overcoat over a sweater) impairs the proper
t and function of the seat belts, reducing
their ability to protect.
●
The slot in the seat belt buckle must not be
blocked with paper or other objects, as this
can prevent the latch plate from engaging
securely.
●
Never use seat belt clips, fastening rings or
similar items to alter the position of the belt
webbing.
●
Frayed or torn seat belts or damage to
the connections, belt retractors or parts of
the buckle could cause severe injuries in the
event of an accident. Therefore, you must
check the condition of all seat belts at regu-
lar intervals.
●
Seat belts which have been worn in an ac-
cident and have been stretched must be re-
placed by a specialised workshop. Renewal
may be necessary even if there is no appa-
rent damage. The belt anchorage should also
be checked.
●
Do not attempt to repair a damaged seat
belt yourself. The seat belts must not be re-
moved or modied in any way.
●
The belts must be kept clean, otherwise
the retractors may not work properly.
Seat belt buckled indication
Lights up red
The driver or one of the passengers have
not fastened their seat belts.
The control lamp
lights up to remind the
driver to fasten their seat belt.
Before starting the vehicle:
●
Fasten your seat belt securely.
●
Instruct your passengers to fasten their seat
belts properly before driving o.
●
Protect children by using a child seat ac-
cording to the child's height and weight
›››page62.
48
Safety
Fig.20 Instrument cluster: indication of the
status of the rear seat seat belts.
When the ignition is switched on, the seatbelt
status display ›››
Fig.20 on the instrument
cluster display informs the driver whether the
occupants of the rear seats have their seat
belts fastened.
Depending on seat occupancy and the status
of the seat belts, the vehicle's seats will light up
in dierent colours:
A white light indicates that the corre-
sponding seat is not occupied.
A green light indicates that the seat’s oc-
cupant is wearing the seat belt.
A red light indicates that the seat is occu-
pied and the occupant is not wearing the
seat belt.
If a speed of 25km/h (15mph) is exceeded
after moving o without the driver or a front
passenger seatbelt being fastened, or if the
seatbelt is unfastened while driving, an audible
signal will sound for 126 seconds. In addition,
the warning lamp on the instrument cluster
display ashes.
The lamp
goes out when the ignition is
on and all occupants have fastened their seat
belts.
Head-on collisions and the laws of
physics
Fig.21 A driver not wearing a seat belt
may be thrown forward violently.
Fig.22 Any rear seat occupants not
wearing a seat belt may be thrown forward
violently, hitting the driver who is wearing
the seat belt.
The eects of the laws of physics in the case
of a head-on collision are easy to explain: the
moment a vehicle starts moving, a type of en-
ergy called “kinetic energy” starts acting on
both the vehicle and its passengers.
The amount of “kinetic energy” depends on
the speed of the vehicle and on the weight
of the vehicle and of its passengers. The taller
they are, the more energy there is to be “ab-
sorbed” in the event of an accident.
The most signicant factor, however, is the
speed of the vehicle. If the speed doubles from
25 km/h (15mph) to 50 km/h (30mph), for
example, the corresponding kinetic energy is
multiplied by four.
Safety
49
Seat belts
Even at speeds of 30 km/h (19 mph) to 50
km/h (30 mph), the forces acting on bodies in
a collision can easily exceed one tonne (1000
kg). At greater speed these forces are even
higher.
Vehicle occupants not wearing seat belts are
not “attached” to the vehicle. In a head-on
collision, they will move forward at the same
speed their vehicle was travelling just before
the impact. This example applies not only to
head-on collisions, but to all accidents and
collisions.
Even at low speeds the forces acting on the
body in a collision are so great that it is not
possible to brace oneself with one's hands. In
the event of a head-on collision, vehicle occu-
pants not wearing a seat belt will be thrown
uncontrollably forward and will collide, for ex-
ample, against the steering wheel, dash panel
or windscreen ›››Fig.21.
It is also important for rear passengers to wear
seat belts properly, as they could otherwise be
thrown forward violently through the vehicle
interior in an accident. If a rear seat occupant
is not wearing a seat belt, they are not only en-
dangering themselves but also the occupants
of the front seats ›››Fig.22.
Fastening and unfastening the seat
belt
Fig.23 Insert the latch plate of the seat
belt into the buckle.
Fig.24 Release the seat belt's latch plate.
Properly worn seat belts hold the vehicle occu-
pants in the position that best protects them
in the event of an accident or sudden braking
›››
.
Fastening the seat belt
Fasten your seat belt before each trip.
●
Adjust the front seat and headrest correctly
›››page44.
●
Engage the seat backrest of the rear seat in
an upright position ››› .
●
Pull the latch plate and place the belt web-
bing evenly across your chest and lap. Do not
twist the seat belt when doing so ››› .
●
Insert the buckle plate in the buckle of the
correct seat ›››Fig.23.
●
Pull the belt to ensure that the latch plate is
securely engaged in the buckle.
Releasing the seat belt
Only unfasten the seat belt when the vehicle
has come to a standstill ››› .
●
Press the red button on the buckle
›››Fig.24. The latch plate is released from
the buckle.
●
Guide the belt back by hand so that it rolls up
easily and does not damage the trim.
50
Safety
WARNING
●
The seat belt cannot oer its full protec-
tion unless the seat backrest is in an upright
position and the seat belt is worn correctly,
according to your size.
●
Unbuckling your seat belt while the vehicle
is in motion can cause severe or fatal injuries
in the event of an accident or sudden brak-
ing.
●
The seat belt itself, or a loose seat belt, can
cause severe injuries if the belt moves from
hard areas of the body to soft areas (e.g. the
stomach).
Correct position of the seat belt
Fig.25 Correct seat belt and headrest
positions, viewed from front and the side.
Fig.26 Position of seat belt during
pregnancy.
Seat belts oer their maximum protection in
the event of an accident and reduce the risk
of sustaining severe or fatal injuries only when
they are properly positioned. Furthermore, if
the webbing is correctly positioned, the seat
belt will hold the vehicle occupants in the op-
timum position to ensure the airbag provides
the maximum protection. The seat belt must
therefore always be worn and the webbing cor-
rectly positioned.
Incorrectly worn seat belts can cause severe or
even fatal injuries ›››
page44, Correct sitting
position of vehicle occupants.
●
The shoulder part of the seat belt must lie
on the centre of the shoulder, never across the
neck or the arm, under the arm or behind the
back.
●
The lap part of the seat belt must lie across
the pelvis, never across the stomach.
●
The seat belt must lie at and t comfortably.
Pull the belt tight if necessary to take up any
slack.
In the case of pregnant women, the seat belt
should pass uniformly over the chest and as
low as possible over the pelvic area with the
strap at so it does not press down on the ab-
domen; in addition, it must be used through-
out the entire pregnancy ›››Fig.26.
Adapting the position of the belt webbing to
your size
The seat belt can be adapted using the follow-
ing equipment:
●
Front seat belts with height adjustment.
●
Front seat height adjustment.
WARNING
An incorrectly worn seat belt web can cause
severe or fatal injuries in the event of an acci-
dent.
●
The shoulder part of the seat belt must lie
on the centre of the shoulder, never under
the arm or across the neck.
●
The seatbelt must lie at and t comforta-
bly across the upper body.
Safety
51
Seat belts
1)
Only if tted with the PreCrash System.
●
The lap part of the seat belt must lie across
the pelvis, never across the stomach. The
seat belt must lie at and t comfortably on
the pelvis. Pull the belt tight if necessary to
take up any slack.
●
In the case of pregnant women, the ab-
dominal strap of the seat belt should pass
as low as possible across the pelvic area,
resting at and “surrounding” the abdomen
›››Fig.26.
●
Do not twist the seat belt while it is fas-
tened.
●
Once the seat belt is positioned correctly,
don't pull it away from your body with your
hand.
●
Do not lie the seat belt across rigid or frag-
ile objects, e.g. glasses, pens or keys.
●
Never use seat belt clips, securing rings or
similar instruments to alter the position of
the belt webbing.
Note
If your physical constitution prevents you
from maintaining the correct position of the
belt webbing, contact a specialised workshop
for help with any special devices to ensure
the optimum protection of the seat belt and
airbag. CUPRA recommends taking your car
in for technical service.
Seat belt height adjustment
Fig.27 Near the front seats: seat belt height
regulator.
Using the height adjusters for the front seats,
the position of the seat belts can be adjusted
in the shoulder area according to the height
of the occupant, so that the seatbelt can be
fastened correctly:
●
Keep the guide device pressed down in the
direction of the arrow ›››Fig.27.
●
Move the guide device up or down until the
seat belt lies over the centre of your shoulder
›››page50, Correct position of the seat
belt.
●
Release the guide device.
●
Pull the belt sharply to check that the device
is engaged securely.
WARNING
Never adjust the belt height while the vehicle
is in motion.
Automatic retractor, tensioner and
belt force limiter
Vehicle seat belts are part of the vehicle’s
safety system ›››
page44. This system has the
following important functions:
Automatic belt retractor
The seat belt shoulder straps on the driver's
and front passenger seats, as well as those on
the rear side seats (and, depending on equip-
ment, also the seat belt of the central rear
seat) are tted with automatic retractors. This
device ensures complete freedom of move-
ment when the shoulder strap is pulled gently
or during normal driving. However, during sud-
den braking, when driving in the mountains,
around bends and when accelerating, the re-
tractor locks the seat belt if it extends rapidly.
In critical driving situations, e.g. in the event
of emergency braking or in the case of over-
steer and understeer, the proactive occupant
protection can tension the front seat belts au-
tomatically if they are worn
1)
. The two belts are
loosened again if an accident does not happen
52
Safety
1)
Only if tted with the PreCrash System.
or when the critical situation passes. Proactive
occupant protection is ready to operate again
›››
page53.
Seat belt tensioner
The seat belts on the front seats and side rear
seats are tted with tensioners.
The tensioners are activated by sensors in the
event of severe head-on, side and rear colli-
sions (in hybrid vehicles they are also activated
in the event of a roll-over), and they tension
the seat belts in a direction opposite their ex-
tension.
If the seat belt is slack, the tensioner tightens
it. This cushions the forward movement of oc-
cupants towards the impact.
The belt pre-tensioners work in combination
with the airbag system. The belt pre-tensioners
activate in combination with some of the air-
bags, depending on the collision type.
When activated, a ne powder may be re-
leased. This is completely normal and it is not
an indication of re in the vehicle.
WARNING
The seatbelt pre-tensioners are only activa-
ted once and the system must be replaced if
they are triggered.
●
Have any triggered pretensioners and af-
fected parts of the system replaced immedi-
ately with new parts approved by CUPRA for
this vehicle.
●
Repairs and modications to the vehicle
should only be made by qualied special-
ist workshops. They have the necessary di-
agnostic equipment, repair information and
tools, as well as qualied personnel. CUPRA
recommends a CUPRA dealership.
●
Never t belt pretensioner parts removed
from vehicles at the end of their useful life,
or pretensioners from recycling plants to the
vehicle.
●
Never modify any component of the belt
pretensioners.
Reversible belt tensioning (proactive occu-
pant protection)
A reversible tensioning of the seat belts
may occur in certain driving situations
›››page53. For example:
●
in the event of sudden braking
●
in the event of oversteering or understeering
●
in the event of minor collisions
Belt force limiter
Depending on the equipment and the country
in question, in the event of an accident, the
seat belt force limiter reduces the force the
seat belt exerts on the body.
Note
●
After certain driving situations, the reversi-
ble belt tensioners may be left permanently
tensioned
1)
. In this case, to loosen the belt, it
must be removed manually while the vehicle
is stationary and then replaced correctly.
●
The relevant safety requirements must be
observed if the vehicle or any components
of the system are to be scrapped. Specialised
workshops are aware of these requirements.
Maintenance and disposal of seat
belt tensioners
The belt tensioners are components of the
seat belts that are installed in the seats of your
vehicle. If you work on the belt tensioners or
remove and install parts of the system when
performing other repair work, the seat belt
may be damaged. The consequence may be
that, in the event of an accident, the belt ten-
sioners function incorrectly or may not func-
tion at all.
Safety
53
PreCrash system
Regulations, which are known to the special-
ised workshops, must be observed to ensure
that the eectiveness of the seat belt ten-
sioner is not reduced and that removed parts
do not cause any injuries or environmental
pollution.
WARNING
Improper handling and home repairs to seat
belts, automatic retractors and belt tension-
ers may increase the risk of serious or fa-
tal injuries. The tensioners may not activate,
even though they should, or they may acti-
vate unexpectedly.
●
Never repair, adjust, or disassemble and re-
assemble seat belt components or tension-
ers. Always have this work carried out by a
specialist workshop.
●
Seat belts, tensioners and their automatic
retractors cannot be repaired and have to be
replaced.
For the sake of the environment
Airbag modules and belt tensioners may con-
tain perchlorate.
Observe the legal requirements for their dis-
posal.
PreCrash system
How it works
The PreCrash system is an assistance system
that actives a series of measures to protect
the vehicle occupants in potentially risky situa-
tions, but which cannot prevent a collision.
It only works completely if no special drive pro-
le is selected and if there are no operating
anomalies.
At the start of each journey and depending on
the time of use and the speed of the vehicle,
the seatbelt is automatically pretensioned in
order to reduce slack in the driver's and front
passenger's seatbelts, provided they are buck-
led.
Basic features
Depending on the legal provisions of the coun-
try and the features of the vehicle, in critical
situations (e.g. in certain cases of emergency
braking or loss of control of the vehicle by the
driver) the following functions can be activated
separately or at the same time when the vehi-
cle is travelling faster than approximately 30
km/h (20 mph).
●
Reversible tensioning of front seat belts that
are fastened.
●
Operation of the hazard warning lights.
●
Automatic closing of the windows until they
are just cracked open and, depending on the
equipment, of the sunroof.
●
In the event of overturning, depending on
the equipment, activation of the belt tension-
ers.
Depending on how critical the driving situation
is, the belts are either tightened individually, or
both belts at the same time.
In addition to Front Assist
In vehicles with Front Assist ›››page211,
within the limits of the system, information is
assessed on the risk of collision with the ve-
hicle in front. The functions of the PreCrash
system may also be activated if there is a high
likelihood of a rear-end collision, or during the
activation of Front Assist.
In addition to Side Assist
In vehicles with Side Assist,›››page222,
within the limitations of this system, informa-
tion is assessed on the risk of collision with
traic to the rear of the vehicle. If a rear-end
collision is highly likely, the functions of the
PreCrash system may also be activated. In this
situation, the hazard warning lights are turned
on with a higher frequency of ashes.
54
Safety
In addition to the Emergency Assist system
In vehicles with emergency assist, driver status
information is assessed within the limitations
of this system. The following PreCrash systems
may be activated if a lack of activity is detec-
ted:
●
Reversible seat belt tensioning of the driver's
seat belt.
●
Automatic closing of the windows until they
are just cracked open and, depending on the
equipment, of the sunroof.
Activating the PreCrash system
The PreCrash system can be partially deactiva-
ted by deactivating the traction and/or stability
control, depending on the equipment. When
these vehicle safety controls are switched on
(by default, every time the ignition is turned
on), the system is fully activated.
Drive prole selection settings
In vehicles with drive prole selection, Pre-
Crash adapts to suit the special vehicle
conguration of the corresponding prole
›››page185.
Limited operation
The PreCrash system is not available or only
has limited availability in the following situa-
tions:
●
When the TCS and/or ESC is o.
●
When driving in reverse.
●
When the airbag control unit is not operating
properly.
●
When there is a fault in the system itself, in
the ESC or in Front Assist.
Troubleshooting
If the PreCrash is not working correctly, the
message System unavailable or System with
limited functions is shown permanently on
the instrument cluster display. Go to a speci-
alized CUPRA Service or SEAT Oicial Service
and ask for the system to be checked.
WARNING
The PreCrash system cannot overcome the
limits imposed by the laws of physics; it only
works within the limits of the system. Risks
that compromise safety are never justied by
the use of this system. The system is not a
replacement for driver awareness and cannot
prevent a collision.
●
Adapt your speed and safe distance to the
vehicle in front of you at all times to suit
the visibility, weather, road and traic condi-
tions.
●
The system is not always able to recognise
objects.
●
The system may not react to people or ani-
mals or objects crossing the path of the vehi-
cle or that are hard to detect.
●
Metallic objects (e.g. fences) or other ele-
ments of the public road or adverse weather
conditions can hinder its operation and thus
its ability to detect collision risk.
●
Never ignore the warning lamps that light
up or the messages shown on the dashboard.
WARNING
Distracting the driver in any way can lead to
an accident and cause injuries.
●
Never change settings on the Infotainment
System while driving.
Airbag system
Why is it so important to wear a
seat belt and to sit correctly?
For the inating airbags to achieve the best
protection, the seat belt must always be worn
properly and the correct sitting position must
be assumed.
The airbag system is not a substitute for seat
belts, but it is an integral part of the vehicle's
overall passive safety system. Please bear in
mind that the airbag system can only work ef-
fectively when the vehicle occupants are wear-
ing their seat belts correctly and have adjusted
the headrests properly. Therefore, it is most
important to properly wear the seat belts at
Safety
55
Airbag system
all times, not only because this is required by
law in most countries, but also for your safety
›››page46, Seat belts.
The airbag inates in a matter of seconds, so if
you are not properly seated when the airbag is
triggered, you may sustain fatal injuries. There-
fore, it is essential that all vehicle occupants
assume a correct sitting position while travel-
ling.
Sharp braking before an accident may cause a
passenger not wearing a seat belt to be thrown
forward into the area of the deploying airbag.
In this case, the inating airbag may inict criti-
cal or fatal injuries on the occupant. This also
applies to children.
Always maintain the greatest possible distance
between yourself and the front airbag. This
way, the front airbags can completely deploy
when triggered, providing their maximum pro-
tection.
The most important factors for triggering the
airbag are the type of accident, the angle of
impact and the vehicle speed.
Whether or not the airbags are activated de-
pends primarily on the vehicle deceleration
rate resulting from the collision and detected
by the control unit. If the vehicle deceleration
occurring during the collision and measured by
the control unit remains below the specied
reference values, the front, side and/or curtain
airbags will not be triggered. Take into account
that the visible damage in a vehicle involved
in an accident, no matter how serious, is not
a factor that determines whether or not the
airbags are activated.
WARNING
Wearing the seat belt incorrectly or assuming
an incorrect sitting position can lead to criti-
cal or fatal injuries
●
All vehicle occupants, including children,
who are not properly strapped in can sustain
critical or fatal injuries if the airbag is trig-
gered. Children up to 12 years old should
always travel on the rear seat. Never trans-
port children in the vehicle if they are not
restrained or the restraint system is not ap-
propriate for their age, size or weight.
●
To reduce the risk of injury from an inat-
ing airbag, always wear the seat belt properly
›››page46.
Description of the airbag system
The airbag system oers additional protection
for the occupants in combination with the seat
belts.
The airbag system comprises the following
modules (depending on the vehicle equip-
ment):
●
Electronic control unit
●
Front airbags for driver and passenger
●
Side airbags
●
Central airbag for the driver
●
Head airbag
●
Airbag control lamp on the instrument
cluster ›››page56
●
Key-operated switch for front passenger air-
bag
●
Control lamp for disabled/enabled status of
the front passenger airbag.
The airbag system operation is monitored
electronically. The airbag control lamp will illu-
minate for a few seconds every time the igni-
tion is switched on (self-diagnosis).
There is a fault in the system if the control
lamp :
●
does not light up when the ignition is
switched on ›››page56,
●
turns o after 4 seconds after the ignition is
switched on,
●
turns o and then lights up again after the
ignition is switched on,
●
illuminates or ashes while the vehicle is
moving.
The airbag system is not triggered if:
●
the ignition is switched o
●
there is a minor head-on collision
●
there is a minor side collision
●
there is a minor head-on collision,
56
Safety
●
in the event of the vehicle overturning if the
dynamic characteristics measured by the con-
trol unit are too low,
●
the impact speed is lower than the reference
value programmed in the control unit.
WARNING
●
The seat belts and airbags can only provide
maximum protection if the occupants are
seated correctly ›››page44.
●
If a fault has occurred in the airbag sys-
tem, have the system checked immediately
by a specialised workshop. Otherwise there is
a danger that during a collision, the system
may fail to trigger, or not trigger correctly.
Airbag activation
The airbags deploy extremely rapidly, within
thousandths of a second, to provide additional
protection in the event of an accident. A ne
dust may develop when the airbag deploys.
This is normal and it is not an indication of re
in the vehicle.
The airbag system is only ready to function
when the ignition is on.
In special accidents instances, several airbags
may activate at the same time.
In the event of minor head-on and side col-
lisions, rear-end collisions, overturning or roll-
over of the vehicle, airbags do not activate.
Airbags only activate if the vehicle overturns in
the hybrid plug-in version of the vehicle.
Activation factors
The conditions that lead to the airbag system
activating in each situation cannot be general-
ised. Some factors play an important role, such
as the properties of the object the vehicle hits
(hard/soft), angle of impact, vehicle speed,
etc.
Deceleration trajectory is key for airbag activa-
tion.
The control unit analyses the collision trajec-
tory and activates the respective restraint sys-
tem.
If the deceleration rate is below the predened
reference value in the control unit the airbags
will not be triggered, even though the accident
may cause extensive damage to the car.
The following airbags are triggered in serious
head-on collisions:
●
Driver airbag.
●
Front passenger airbag.
●
Head airbags.
In the event of serious side collisions, some
(or all) of the following airbags can be acti-
vated (depending on the severity of the col-
lision):
●
Head airbags on both sides.
●
Front side airbag on the side of the accident.
●
Central airbag.
In an accident with airbag activation:
●
the interior lights switch on (if the interior
light switch is in the courtesy light position);
●
the hazard warning lights turn on;
●
all doors are unlocked;
●
the fuel supply to the engine is cut;
●
in hybrid vehicles, the high voltage system is
switched o;
●
an emergency call is started.
Airbag system control lamps
Lights up on the instrument cluster
Fault in the airbag system and seat belt
tensioners. Have the system checked im-
mediately by a specialised workshop.
Lights up on the roof console
Front passenger airbag deactivated.
Check if the airbag should be kept deacti-
vated.
Safety
57
Airbag system
Lights up on the roof console
Front passenger airbag activated. The
control lamp turns o automatically 60
seconds after the ignition is switched on.
Several warning and control lamps light up for a
few seconds when the ignition is switched on,
signalling that the function is being veried.
They will switch o after a few seconds.
If the airbag and seat belt tensioner system
control lamp remains on or ashes, it in-
dicates a malfunction in the airbag and seat
belt tensioner system ››› . Have the system
checked immediately by a specialised work-
shop.
If the front passenger airbag has been deacti-
vated, the warning lamp remains lit on
the roof console to remind you that the airbag
is deactivated. If, with the front passenger air-
bag deactivated, this lamp does not remain
lit or if it is lit along with the control lamp
on the instrument cluster, there is a fault in
the airbag system ››› . If the control lamp is
ashing, there is a fault in the disabling of the
airbag system ››› . Have the system checked
immediately by a specialised workshop.
WARNING
In the event of a fault in the airbag and seat
belt tensioner system, the airbags and seat
belts may not trigger correctly, may fail to
trigger or may even trigger unexpectedly.
●
The vehicle occupants run the risk of sus-
taining severe or fatal injuries. Have the sys-
tem checked immediately by a specialised
workshop.
●
Do not mount a child seat in the front pas-
senger seat or remove the mounted child
seat! The front passenger airbag may deploy
during an accident in spite of the fault.
NOTICE
Always pay attention to any lit control lamps
and to the corresponding descriptions and
instructions to avoid damage to the vehicle
or harm to the occupants.
Front airbags
Fig.28 Driver’s airbag in the steering wheel.
Fig.29 Front passenger airbag located in
dash panel.
The driver's front airbag is housed in the steer-
ing wheel and that of the front passenger, on
the dash panel. Airbags are identied by the
word “AIRBAG”.
58
Safety
1)
Not available in all markets.
The airbag covers open and remain attached
to the steering wheel and instrument panel
when the driver and front passenger air-
bags are triggered, respectively ›››
Fig.28 ,
›››Fig.29.
In conjunction with the seat belts, the front
airbag system gives the front occupants addi-
tional protection for the head and chest in the
event of a severe frontal collision ››› .
Their special design allows the controlled es-
cape of the propellant gas when an occupant
puts pressure on the bag. Thus, the head and
chest are protected by the airbag. After the
collision, the airbag deates suiciently to al-
low visibility.
WARNING
●
The deployment space between the front
passengers and the airbags must not in any
case be occupied by other passengers, pets
and objects.
●
The airbags provide protection for just one
accident; replace them once they have de-
ployed.
●
It is also important not to attach any ob-
jects such as drink holders or telephone
mountings to the surfaces covering the air-
bag units.
Activate and deactivate front pas-
senger airbag
Fig.30 Switch for activating and
deactivating the front passenger airbag.
Fig.31 On the roof console: passenger
airbag deactivation control lamp.
Deactivate the front passenger airbag only if
you have to use a rear-facing child seat in the
front passenger seat.
CUPRA recommends tting the child seat in
the rear seat to avoid having to deactivate the
front passenger airbag.
When the front passenger airbag is deactiva-
ted, this means that only the front passenger
airbag is deactivated. All the other airbags in
the vehicle remain activated.
Deactivate and activate the front passenger
airbag
1)
●
Switch the ignition o.
●
Open the passenger side door.
●
Remove the key blade from the vehicle key.
●
Insert the key blade into the slot provided
in the front passenger airbag disconnection
switch ›››Fig.30. About 3/4 of the key should
enter; this is as far as it will go.
●
Turn the key gently to change its position to
(deactivate) or to (activate). If you have
diiculty, ensure that you have inserted the key
as far as it will go.
●
Close the front passenger door.
●
When deactivating the airbag, switch the ig-
nition on and check that the control lamp
remains lit ›››Fig.31.
Safety
59
Airbag system
●
When reactivating the airbag, check that
when the ignition is switched on, the
control lamp does not light up and the 
lamp lights up for 60 seconds and then turns
o.
WARNING
●
The driver of the vehicle is responsible for
disabling or switching on the airbag.
●
Always switch o the ignition before disa-
bling the front passenger airbag! Failure to do
so could result in a fault in the airbag deacti-
vation system.
●
Never leave the key in the airbag disabling
switch as it could get damaged or enable or
disable the airbag during driving.
●
If for any reason an airbag is deactivated,
reactivate it as soon as possible so that it can
full its protective function.
Central airbag
Fig.32 In the inner padding of the driver's
seat backrest: central airbag.
Fig.33 Fully inated central airbag
(deployment zone).
The central airbag is installed for the front
seats and is located in the inner padding of the
driver's seat backrest.
The location of the central airbag is indicated
by the inscription “AIRBAG” ›››
Fig.32.
When triggered, the central airbag lls the
marked zone (deployment zone) ›››Fig.33.
For this reason, never place or x objects in
this zone ››› .
The central airbag triggers in the case of a side
collision or if the vehicle overturns, reducing
the risk of vehicle occupants suering injuries.
WARNING
When triggered, the airbag inates at high
speed in milliseconds.
●
Always keep the central airbag deployment
zone clear.
●
Never attach objects to the central airbag
cover or the deployment zone.
●
Do not allow other people, animals or ob-
jects to get between the occupants of the
front seats and the airbag deployment zone.
Make sure that all vehicle occupants, includ-
ing children, follow this rule.
●
Never use upholstery or seat covers that
have not been explicitly authorised for the
seats of the vehicle. Otherwise, the central
airbag will not be able to deploy if triggered.
60
Safety
WARNING
Improper manipulation of the driver and
front passenger seats can prevent the central
airbag from operating correctly and cause
serious injuries.
●
Never remove the front seats from the ve-
hicle or modify their components.
●
If the backrest side bolsters are subjected
to a lot of force, the central airbag may not
trigger correctly,it may not trigger at all or if
may trigger unexpectedly.
●
Have a specialised repair shop immediately
repair any damage to the original seat up-
holstery or seams in the area of the central
airbag module.
Side airbags
Fig.34 Side airbag in driver's seat.
Fig.35 Illustration of completely inated
side airbags on the left side of the vehicle.
The side airbags are located in the front seat
backrests ›››
Fig.34 , ›››Fig.35.
Its location is indicated with the word “AIR-
BAG” at the top of the backrest.
In conjunction with the seat belts, the side air-
bag system provides additional protection for
the upper body in the event of a severe side
collision ››› .
In a side collision, the side airbags reduce the
risk of injury to passengers to the areas of the
body facing the impact. In addition to their
normal protection, the seat belts also hold the
passengers in the event of a side collision; this
is how these airbags provide maximum protec-
tion.
WARNING
●
If you do not wear a seat belt, if you lean
forward, or are not seated correctly while the
vehicle is in motion, you are at a greater risk
of injury if the side airbag system is triggered
in an accident.
●
In order for the side airbags to provide their
maximum protection, the prescribed sitting
position must always be maintained with seat
belts fastened while travelling.
●
In a side-on collision the side airbags will
not work if the sensors do not correctly
measure the pressure increase on the inte-
rior of the doors, due to air escaping through
the areas with holes or openings in the door
panel.
●
Never drive if the interior door panels have
been removed or if the panels have not been
correctly tted.
●
Occupants of the outer seats must never
carry any objects or pets in the deployment
space between them and the airbags, or al-
low children or other passengers to travel in
this position. It is also important not to attach
any accessories (such as drink holders) to
the doors. This would impair the protection
oered by the side airbags.
●
Ensure that children are correctly seated
in their seats and that their heads are not
in the deployment zone of the side airbags
›››
Fig.35, as deploying airbags could hit
them and cause serious injury.
Safety
61
Airbag system
●
The built-in coat hooks should be used
only for lightweight clothing. Do not leave
any heavy or sharp-edged objects in the
pockets.
●
The backrest bolster must not be hit or
kicked hard, as this could damage the sys-
tem. In this case, the side airbags would not
be triggered.
●
Under no circumstances should protective
covers be tted over seats with side airbags
unless the covers have been approved for use
in your vehicle. Because the airbag deploys
from the side of the backrest, the use of con-
ventional seat covers would obstruct the side
airbag, seriously reducing the airbag's eec-
tiveness.
●
Any damage to the original seat upholstery
or around the seams of the side airbag units
must be repaired immediately by a special-
ised workshop.
●
The airbags provide protection for just one
accident; replace them once they have de-
ployed.
●
Any work on the side airbag system or re-
moval and installation of the airbag compo-
nents for other repairs (such as removal of
the front seat) should only be performed by a
specialised workshop. Otherwise, faults may
occur during the airbag system operation.
Head-protection airbags
Fig.36 Location of head-protection
airbags.
Head-protection airbags are on both sides of
the passenger compartment, above the doors
›››
Fig.36 and their location is indicated with
the word “AIRBAG”.
In combination with the seat belts, the Side
Curtain Protection® airbags provide additional
protection for the upper part of the body of
vehicle occupants in the event of serious side
collisions or the vehicle overturning ››› .
The framed area is covered by the head-pro-
tection airbag when it is deployed (deployment
area) ›››Fig.36. Therefore, objects should
never be placed or mounted in this area ›››
.
In the event of a side impact, both head air-
bags are deployed, irrespective of the side of
the impact.
The head-protection airbags reduce the risk of
injury to passengers in the front and rear side
seats facing the impact.
WARNING
●
In order for the head-protection airbags to
provide their maximum protection, the pre-
scribed sitting position must always be main-
tained with seat belts fastened while travel-
ling.
●
For safety reasons, the curtain airbag must
be disabled in those vehicles tted with a
screen dividing the interior of the vehicle.
See your technical service to make this ad-
justment.
●
There must be no other persons, animals
or objects between the occupants of the
outer seats and the deployment space of the
head-protection airbags so that the head-
protection airbag can deploy completely
without restriction and provide the greatest
possible protection. Therefore, sun blinds
which have not been expressly approved for
use in your vehicle may not be attached to
the side windows.
●
Ensure that children are correctly seated
in their seats and that their heads are not
in the deployment zone of the head airbags
›››
Fig.36, as deploying airbags could hit
them and cause serious injury.
62
Safety
●
The built-in coat hooks should be used
only for lightweight clothing. Do not leave
any heavy or sharp-edged objects in the
pockets. Please, do not hang clothes on coat
hangers.
●
The airbags provide protection for just one
accident; replace them once they have de-
ployed.
●
Any work on the head-protection airbag
system or removal and installation of the air-
bag components for other repairs (such as
removal of the roof lining) should only be
performed by a specialised workshop. Other-
wise, faults may occur during the airbag sys-
tem operation.
●
The side and head airbags are managed
through sensors located in the interior of the
front doors. To ensure the correct operation
of the side and curtain airbags neither the
doors nor the door panels should be modi-
ed in any way (e.g. tting loudspeakers). If
the front door is damaged, the airbag system
may not work correctly. All work carried out
on the front door must be done in a special-
ised workshop.
Transporting children
safely
Introduction
For safety reasons, as we have learned from
accident statistics, we recommend that chil-
dren under 12 years of age travel in the rear
seats. Depending on their age, height and
weight, children travelling in rear seats must
use a child seat or a seat belt. For safety rea-
sons, the child seat should be installed in the
rear seat, behind the front passenger seat or in
the centre back seat.
The laws of physics involved and the forces
acting in a collision also apply to children
›››
page48. But unlike adults, children do not
have fully developed muscle and bone struc-
tures. This means that children are subject to a
greater risk of injury.
To reduce the risk of injuries, children must
always use special child restraint systems when
travelling in the vehicle.
We recommend the use of child safety prod-
ucts from the Genuine Accessories Catalogue,
which includes systems for all ages (see
).
These systems have been especially de-
signed and approved and comply with the
UNECER129 (i-Size) regulation.
CUPRA recommends securing the child seats
shown on the website as described below:
●
Rear facing child seat (group 0+ / child
height 40-83cm):
–
ISOFIX and support leg (Britax Römer
Baby-Safe 3 i-SIZE + Flex Base i-SENSE).
●
Rear facing child seat (group 1 / child height
76-105cm):
–
ISOFIX AND Top Tether (Britax Römer TRI-
FIX 2 i-Size).
●
Forward facing child seat (group 2 / child
height 100-135cm):
–
Seat belt and ISOFIX (Britax Römer KIDFIX
i-Size).
You must also use the seat’s “Secure-Guard”
seatbelt connection point and adjust the
side impact protection system “SICT” (avail-
able on certain models), located in the seat
backrest. Adjust only the “SICT” closest to
the door. Please follow the child seat manu-
facturer's usage instructions.
●
Forward facing child seat (group 3 / child
height 125-150cm):
–
Seat belt and ISOFIX (Britax Römer KIDFIX
i-Size).
Group 3 can use the seat with backrest
or only the seat base without the backrest
(booster). The backrest of the child seat
has an adult seat belt guide and a headrest,
meaning that the seat with the backrest of-
fers better protection than boosters without
backrests. In addition, the child seat attach-
Safety
63
Transporting children safely
ment point for the “Secure-Guard” lap belt
must be used. CUPRA recommends the use
of child seats with backrests.
Follow the manufacturer's instructions and ob-
serve any statutory requirements when instal-
ling and using child seats. Always read and note
›››page64.
We recommend you always carry the manufac-
turer's Child Seat Instruction Manual together
with the on-board documentation.
Classication of child seats
Fig.37 Examples of child seats.
Use only child seats that are oicially approved
and suitable for the child.
These seats are subject to the ECE-R44 or
ECE-R129 standards. ECE-R stands for: Eco-
nomic Commission for Europe Regulation.
Child seats by weight group as per ECE-R44
and height as per ECE-R129
The child seats are grouped into 5 categories:
Group as per ECE-R44
Group 0 Up to 10 kg
Group 0+ Up to 13 kg
Group 1 From 9 to 18 kg
Group 2 From 15 to 25 kg
Group 3 From 22 to 36 kg
Child height as per ECE-R129
45-75 cm From birth to approx. 12
months.
45-87 cm From birth to approx. 4 years.
61-105 cm approx. 4 months to 4 years
100-135 cm approx. 4 to 8 years
125-150 cm approx. 4 years to 12 years
Child seats that have been tested and ap-
proved under the ECE R44 or ECE-R129 stand-
ards bear the ECE-R44 or ECE-R129 test marks
on the seat (the letter E in a circle with the test
number below it).
Follow the manufacturer's instructions and ob-
serve any statutory requirements when instal-
ling and using child seats.
We recommend that you always include the
manufacturer's Child Seat Instruction Manual
together with the on-board documentation.
CUPRA recommends you use child seats from
the Original Accessories Catalogue. These
child seats have been designed and tested for
use in our vehicles. You can nd the right child
seat for your model and age group at our deal-
ers.
Child seats by approval category
Child seats may have the approval category of
universal, semi-universal, vehicle specic (all
according to the ECE-R44 standard) or i-Size
(according to the ECE-R129 standard).
●
Universal: child seats with universal approval
can be installed in all vehicles. There is no need
to consult any list of models. In the case of
universal approval for ISOFIX, the child seat is
additionally provided with a Top Tether belt.
●
Semi-universal: semi-universal approval, in
addition to the standard requirements of uni-
versal approval, requires safety devices to lock
the child seat, which require additional test-
ing. Child seats with semi-universal approval
include a list of vehicle models for which they
can be installed.
64
Safety
●
Vehicle-specic: vehicle-specic approval
requires a dynamic test of the child seat for
each vehicle model separately. Child seats with
vehicle-specic approval also include a list of
vehicle models for which they can be installed.
●
i-Size: child seats with i-Size approval must
meet the requirements prescribed in the ECE-
R 129 standard in relation to installation and
safety. Child seat manufacturers can tell you
which seats have i-Size approval for this vehi-
cle.
Fitting and using child seats
Fig.38 Airbag sticker: on the passenger
side sunshade blind.
Fig.39 Airbag sticker: on the rear frame of
the passenger side door.
Warnings about tting a child seat
Take the following general warnings into ac-
count if you are going to t a child seat. They
are valid for all child seats regardless of their
attachment system.
●
Please read and follow the child seat manu-
facturer's operating instructions.
●
The child seat should preferably be tted to
the rear seat behind the front passenger seat
so that the child can exit the vehicle on the
pavement side.
●
Set the height of the seat belt such that
it adapts to the child seat naturally, without
twisting. The lowest position of the seat belt
height regulator must be used with rear-facing
child seats.
●
To correctly use a child seat in the back, the
front backrest must be adjusted so that there
is no contact with the child seat in the back if
it is rear facing. In the case of forward-facing
restraint systems, the front backrest must be
adjusted so that there is no contact with the
child's feet.
●
For a correct assembly of the child's seat on
the rear seats, adjust or dismount the head-
rest, in order to prevent contact with the seat.
●
If a semi-universal type seat is to be installed,
in which the method of attachment to the car
is through the seat belt and support bracket,
it should never be installed in the central rear
seat as the ground clearance is lower than in
other places and the support bracket will not
allow the seat to remain suiciently stable.
Important information about the front pas-
senger airbag
A sticker with important information about the
passenger airbag is located on the passenger's
sunshade blind and/or on the passenger side
door frame ›››Fig.38.
Read and always observe the safety informa-
tion included in the following chapters:
●
Safety distance with respect to the passenger
airbag ›››
page54.
●
Objects between the passenger and the pas-
senger side airbag ››› in Front airbags on
page58.
Safety
65
Transporting children safely
The passenger side front airbag, when ena-
bled, is a serious risk for a rear-facing child
since the airbag can strike the seat with such
force that it can cause serious or fatal injuries.
Children up to 12 years old should always travel
on the rear seat.
Therefore we strongly recommend that you
transport children on the rear seats. This is the
safest location in the vehicle. Alternatively, the
front passenger airbag can be disabled with a
key-operated switch ›››page58. When trans-
porting children, use a child seat suitable for
the age and size of each child ›››page63.
WARNING
●
If a child seat is secured to the front pas-
senger seat, the risk to the child of sustaining
critical or fatal injuries in the event of an ac-
cident increases.
●
An inating front passenger airbag can
strike the child seat and throw it with great
force against the door, the roof or the back-
rest.
●
Never install a rear-facing child seat on the
front passenger seat unless the front passen-
ger airbag has been disabled. Risk of poten-
tially fatal injuries to the child! However, if
necessary, the front passenger airbag must
be deactivated›››
page58.
●
For those vehicles that do not include a key
lock switch to deactivate the airbag, the vehi-
cle must be taken to a technical service. Do
not forget to reconnect the airbag when an
adult wants to sit in the front passenger seat.
●
Never allow a child to be transported in a
vehicle without being properly secured, or
to stand up or kneel on a seat while travel-
ling. In an accident, the child could be ung
through the vehicle, causing possibly fatal in-
juries to themselves and to the other vehicle
occupants.
●
Never leave a child alone in the child seat
or in the vehicle.
●
Children who are less than 1.50m tall must
not wear a normal seat belt without a child
seat, as this could cause injuries to the ab-
dominal and neck areas during a sudden
braking manoeuvre or in an accident.
●
When a child seat is mounted in the rear
seats, the door's child lock should be activa-
ted ›››page112.
Attachment systems
Depending on the country, dierent attach-
ment systems are used for safely installing child
seats.
Attachment systems overview
●
ISOFIX: ISOFIX is a standardised attachment
system allowing quick and safe attachment of
child seats in the vehicle. ISOFIX attachment
establishes a rigid connection between the
child seat and the car body.
The child seat has two rigid attachment clips,
called connectors. These connectors are t-
ted into the ISOFIX attachment rings found
between the seat cushion and the backrest
of the vehicle's back seat (on the sides). ISO-
FIX attachment systems are used mainly in Eu-
rope ›››page66. If necessary, ISOFIX at-
tachment may have to be supplemented with a
Top Tether belt or a support bracket.
●
Automatic three-point seat belt. Whenever
possible, it is preferable to attach the child
seats with the ISOFIX system rather than at-
taching them with an automatic three-point
seat belt ›››page71.
Additional attachment:
●
Top Tether: the Top Tether belt is guided
over the back of the rear seat and attached to
an anchor point with a hook. Anchor points are
located at the back of the rear seat backrest on
the luggage compartment side ›››page69.
The rings for retaining the Top Tether belt are
marked with an anchor symbol.
●
Support bracket: some child seats rest on
the oor of the vehicle with a support bracket.
The support bracket prevents the child seat
from tipping forward in the event of impact.
Child seats tted with a support bracket should
66
Safety
only be used in the passenger seat and side
rear seats ››› . For the assembly of this type
of seat you should also consult the list of ap-
proved vehicles for this assembly, available in
the instructions for child restraint systems.
Recommended systems for attaching child
seats
CUPRA recommends attaching child seats as
follows:
●
Baby carriers or rear facing child seats:
ISOFIX and support bracket or i-Size.
●
Forward-facing child seats: ISOFIX and Top
Tether.
WARNING
Incorrect use of the support bracket can
cause serious or fatal injury.
●
Make sure the support bracket is correctly
and safely installed.
●
When the child seat base is supporting the
weight of the child, the support leg must not
be in the air or propped up with objects. Also
ensure that the base of the child seat rests
permanently on the surface of the vehicle's
seat. The support leg of the child seat must
not lift the base of the child seat o the sur-
face of the vehicle's seat.
Securing a child seat with the ISO-
FIX or i-Size system
The marking of ISOFIX or i-Size anchor points
depends on the equipment and the country in
question.
To understand the compatibility of the ISOFIX
or i-Size systems in the vehicle, check the table
below.
Safety
67
Transporting children safely
Vehicle ISOFIX/i-Size positions
Child seat Child seat orientation
Size class /
ISOFIX class
Front passenger seat
Rear side
seat
Rear cen-
tral seat
airbag ena-
bled
a)
airbag disabled
b)
Group 0: up to 10kg Rear facing E / R1 X IL IL X
Group 0+: up to 13kg Rear facing
E / R1 X IL IL X
D / R2 X IL IL X
C / R3 X IL IL X
Group I: 9 to 18kg
Rear facing
D / R2 X IL IL X
C / R3 X IL IL X
Forward-facing
B / F2 IL, IUF X IL, IUF X
B1 / F2X IL, IUF X IL, IUF X
A / F3 IL, IUF X IL, IUF X
Group II: 15 to 25kg
c)
Forward-facing -- / -- IL X IL X
Group III: 22 to 36kg
c)
Forward-facing -- / -- IL X IL X
i-Size child seat
Rear facing -- / R2 X IUF IUF X
Forward-facing -- / B2, F2X IUF X IUF X
Booster Forward-facing -- / B2, B3 IB X IB X
a)
For forward-facing child seats with the airbag activated, the passenger seat must be positioned as far away from the airbag as possible, while ensuring that the
upper attachment point of the vehicle seatbelt is behind the child seat.
b)
For rear-facing child seats with the airbag deactivated, seats without height adjustment should be moved to their rearmost position, and seats with height
adjustment should be moved to their rearmost and lowest position.
c)
Installation in front seats requires reclining the backrest.
●
Size class: The indication of class according to size corresponds to the authorised body weight for the child seat. In child seats with universal or
semi-universal approval, the class according to size is indicated on the ECE approval label. The indication of class according to size is stated on the
corresponding child seat.
68
Safety
1)
Not available in all markets.
●
IUF: Suitable for ISOFIX / i-Size child restraint systems with “universal” approval, approved for use in this weight group.
●
IL: Suitable for certain ISOFIX child restraint systems that can be for the specic vehicle, restricted or semi-universal categories. Take the child seat
manufacturer's vehicle list into account.
●
IB: Seat suitable for installing an ISOFIX forward-facing group 2/3 booster seat as well as an i-size forward-facing child seat for children with a height
of 100 to 150cm.
●
X: Position not suitable for ISOFIX or i-Size child restraint systems in this weight group or size class.
Securing the child seat with the ISOFIX or
i-Size system
Fig.40 Rear seat: location of the ISOFIX or
i-Size securing rings.
Fig.41 Front passenger seat: location of
the i-Size securing rings.
Fig.42 Rear seats: tting a child seat with
the ISOFIX system.
You must follow the child seat manufacturer's
instructions.
The location of the ISOFIX or i-Size anchor
points is indicated by a symbol ›››
Fig.40 ,
›››
Fig.41
1)
. In some vehicles, the rings are
secured to the seat frame and, in others, they
are secured to the rear oor.
Safety
69
Transporting children safely
1)
Not available in all markets/versions.
●
If necessary, remove the protective caps
from the ISOFIX or i-Size anchor points.
●
Press the child seat onto the ISOFIX or iSize
securing rings until it is heard to engage se-
curely ›››Fig.42. If the child seat is equipped
with Top Tether anchor points, secure it to the
corresponding ring ›››page69. Follow the
child seat manufacturer’s instructions.
●
Pull on both sides of the child seat to ensure
that it is properly anchored.
Child seats with the ISOFIX or i-Size and Top
Tether attachment system can be purchased
from technical services.
WARNING
The securing rings are designed only for use
with ISOFIX or i-Size and Top Tether system
child seats.
●
Never secure other child seats that do not
have ISOFIX, i-Size or Top Tether systems, or
safety belts or any other objects to the secur-
ing rings – as this can result in potentially
fatal injuries.
●
Ensure that the child seat is correctly se-
cured to the ISOFIX or i-Size rings and the
Top Tether.
Top Tether securing belts
Fig.43 Rear part of the rear seats: Top
Tether belt anchor.
Fig.44 Rear of front passenger seat
backrest: Top Tether belt anchor (not
available in all markets/versions).
Child seats with a Top Tether system are tted
with an additional belt for fastening to an an-
chor point in the vehicle. This anchor point
is located on the rear of the rear seat back-
rest and of the front passenger seat backrest
1)
(identied with the symbol
) and provides
better retention ›››Fig.43, ›››Fig.44.
The objective of this system is to reduce for-
ward movements of the child seat in a head-on
collision, to reduce the risk of injuries that may
be caused to the child’s head by impacting
against any element of the inside of the vehi-
cle.
Use of Top Tether on rear-facing child re-
straints
Currently, there are very few rear-facing child
restraints with Top Tether. The car seat manu-
facturer's instructions for proper installation of
the Top Tether should be read carefully and
followed.
70
Safety
Locking the tether belt
Fig.45 Rear seats: adjustment and
assembly according to the Top Tether belt.
Fig.46 Front passenger seat: adjustment
and assembly according to the Top Tether
belt.
●
Follow the manufacturer's instructions to de-
ploy the child seat Top Tether retaining belt
●
Rear seats: position the belt under the head-
rest (according to the instructions of the seat
itself, lift or remove the headrest if necessary)
›››Fig.45.
Passenger seat: pass the belt over the built-in
headrest ›››Fig.46.
●
Slide the belt and secure it properly with the
anchor on the rear seat backrest ›››Fig.43 ,
›››Fig.44.
●
Tighten the belt securely according to the
manufacturer’s instructions.
Release the tether belt
●
Loosen the belt according to the manufac-
turer’s instructions.
●
Press the lock and release it from the anchor
bracket.
WARNING
Installing safety seats incorrectly will increase
the risk of injury in the event of a collision.
●
Never attach the tether belt to a fastening
hook in the luggage compartment.
●
Never attach or secure luggage or other
items to the lower anchor points (ISOFIX) or
Top Tether anchor points.
WARNING
Child restraint anchors are designed to sup-
port the loads of properly adjusted child
restraint systems. Under no circumstances
should they be used to attach adult seat
belts, harnesses or other items or equipment
to the vehicle.
Safety
71
Transporting children safely
Fitting a child seat using the seat
belt
If you want to t a universal approval category
(U) child seat in your vehicle, you must check
that the seat is approved for your vehicle.
You will nd any necessary information on the
child seat’s orange ECE approval label.
The following table shows the dierent tting
options:
Child seat Child seat orientation
Front passenger seat
Rear side seat
Rear central
seat
a)
Airbag enabled
b)
Airbag deactivated
c)
Group 0 up to 10kg Rear facing X U U U
Group 0+ up to 13kg Rear facing X U U U
Group I 9 to 18kg
Rear facing X U U U
Forward-facing U X U U
Group II 15 to 25kg Forward-facing U X U U
Group III 22 to 36kg Forward-facing U X U U
Child seats as per ECE-
R129
Rear facing X U U U
Forward-facing U X U U
X: Position not compatible for the installation of seats in this conguration.
U: Position suitable for the installation of seats in this conguration.
a)
Do not use semi-universal seats that use the vehicle’s seat belt and a support leg as a securing system on the centre rear seat.
b)
Move the front passenger seat as far as possible from the airbag. Ensure that the upper attachment point of the vehicle’s seat belt remains behind the child seat.
c)
Seats without height adjustment should be placed in their rearmost position. Seats with height adjustment should be placed in their rearmost and highest
position.
72
Safety
Fitting a child seat using the seat belt
Fig.47 On rear seats: installing a child seat.
●
Set the height of the seat belt such that
it adapts to the child seat naturally, without
twisting. The lowest position of the seat belt
height regulator must be used with rear-facing
child seats.
●
Put the seat belt in place and pass it through
the child seat according to the instructions of
the child seat manufacturer.
●
Make sure that the seat belt is not twisted.
●
Insert the latch plate into the seat's buckle
until you hear the engagement click.
WARNING
When travelling, children must be secured in
the vehicle with a restraint system suitable
for age, weight and size.
●
Always read and observe information and
warnings concerning the use of child seats
›››page64.
In case of emergency
Hazard warning lights
Fig.48 Centre console: hazard warning
lights button.
The hazard warning lights are used to draw the
attention of other road users to your vehicle in
emergencies.
If your vehicle is stationary:
1. Park the vehicle at a safe distance from
road traic.
2. Press the button to switch on the hazard
warning lights ›››
.
3. Apply the electronic parking brake.
4. Stop the engine.
5. Press the parking lock button P.
6. Follow the legal provisions of each coun-
try (reective vest, warning triangles, light
beacon, etc.).
7. Always carry the key with you when leaving
the vehicle.
All turn signals ash simultaneously when the
hazard warning lights are switched on. The two
turn signal lamps and the turn signal lamp
in the switch will ash at the same time. The
simultaneous hazard warning lights also work
when the ignition is switched o.
While the hazard warning lights are on, you can
signal a direction or lane change, e.g. during
towing, by operating the turn signal lever. The
hazard warning lights remain switched o dur-
ing this time.
Emergency braking warning
If the vehicle brakes suddenly and continu-
ously at a speed of more than 80 km/h (50
mph), the brake light ashes several times per
second to warn the vehicles driving behind.
If you continue braking, the hazard warning
lights will come on automatically when the
Safety
73
In case of emergency
vehicle comes to a standstill. They switch o
automatically when the vehicle starts to move
again.
WARNING
●
The risk of an accident increases if your
vehicle breaks down. Always use the hazard
warning lights and a warning triangle (or light
beacon, depending on the country) to draw
the attention of other road users to your sta-
tionary vehicle.
●
Never leave anybody inside the vehicle,
particularly children or anybody who may
need help. This is especially important when
the doors are locked. Individuals locked in
the vehicle can be exposed to very high or
very low temperatures.
●
Due to the high temperatures that the
catalytic converter can reach, never park in
an area where the catalytic converter could
come into contact with highly inammable
materials, for example dry grass or spilt pet-
rol. This could start a re.
Note
●
The 12-volt vehicle battery will run down
if the hazard warning lights are left on for a
long time (even if the ignition is switched o).
●
The use of the hazard warning lights de-
scribed here is subject to the relevant statu-
tory requirements.
Behaviour in the event of an acci-
dent or re
Actions to take in the event of a re or acci-
dent
For your own safety and that of other passen-
gers, the following points should be observed
in the order given ›››
:
●
Switch o the engine.
●
If possible, switch on the hazard warning
lights ›››page72.
●
Follow the legal provisions of each country
(reective vest, warning triangles, light beacon,
etc.).
●
If necessary, get any people out of the haz-
ard area and apply rst aid.
●
Notify the emergency services.
●
Wait at a safe distance from the scene of the
accident for the emergency services to arrive.
●
In case of re, do not attempt to extinguish
the re yourself or remain near the vehicle.
WARNING
For your own safety, do not ignore this im-
portant check list, otherwise accidents and
serious injuries could occur.
●
Always complete the operations on the
check list and always bear in mind the gen-
eral safety measures.
WARNING
In the event of re, an explosion may occur
and substances harmful to health may be re-
leased, which can cause serious injury.
●
Never stay near the burning vehicle.
Information call, Assistance call
and Emergency call service
Fig.49 On the roof console: controls for
voice services.
74
Safety
Fig.50 Emergency call button.
Depending on the equipment, an emergency
call system may be located on the roof con-
sole.
The following voice services can be run by
pressing the buttons
, and ›››Fig.49:
●
Information call.
●
Assistance call.
●
Emergency call service.
A built-in control unit establishes the connec-
tion.
When a voice service is activated, a connec-
tion is established with a phone line.
Control lamp.
There is a control lamp on the control
›››
Fig.49 (arrow). It shows the following sta-
tuses:
●
O: the eCall service is not available.
●
Flashes in red, approx. 20 seconds after
switching on the ignition: the eCall service is
deactivated.
●
Lights up red: system failure. The eCall serv-
ice is available with certain restrictions. CUPRA
suggests going to a specialised workshop.
●
Lights up green: the eCall service is availa-
ble. The system is ready to work in the vehicle.
●
Flashes green: There is an ongoing voice
connection.
Assistance call
With the breakdown call you can directly re-
quest specialised help in the event of a break-
down.
Parallel to the voice call, some vehicle data is
transmitted, e.g. your current location.
Information call
With an information call, a call is placed to
CUPRAS.A. customer care service.
Note
Breakdown service and information calls can
incur an additional cost on your telephone
bill.
Types of emergency call
●
Public (mandatory by law): emergency call
made to the emergency services of the coun-
try you are driving in, in the language of that
country. ›››page76.
●
Private: an emergency call that is made to
a “CUPRA call centre”, which oers improved
customer service, such as service in the lan-
guage selected in the infotainment system. At
any time, the user can choose to cancel the
private emergency call in order to be attended
by the country's emergency services.
Private emergency call
If the private emergency call service is availa-
ble in the vehicle's service portfolio, the emer-
gency call service is activated by default for a
limited period of time.
●
The emergency call service can be used
to organise help as quickly as possible in an
emergency situation.
●
When the emergency call service is activa-
ted, a connection is made to the CUPRA emer-
gency call centre.
●
If an emergency call is made manually or,
in the event of an accident, when the airbag
or seatbelt pretensioner is triggered, the data
relevant to the emergency call will be transmit-
ted automatically, for example, the current lo-
cation of the vehicle ›››
page401.
Safety
75
In case of emergency
●
The telephone contact person communi-
cates in the language set in the vehicle's Info-
tainment system. If this language is not availa-
ble at the location where the emergency call is
currently being made, English will be used.
●
Additional components such as an emer-
gency call microphone, an emergency loud-
speaker and an integrated battery which is sep-
arate from the integrated power supply, are in-
stalled to ensure operation even after a serious
accident.
●
The emergency call service can be deacti-
vated permanently by a qualied specialist.
CUPRA recommends that you contact an oi-
cial CUPRA service or a SEAT oicial service.
●
If the public emergency call system is avail-
able in the vehicle, the private emergency
call service can be deactivated via the web
or app, or by preventing data transmission in
the Infotainment system, via the privacy mode
›››page273.
Starting an emergency call manually
1. Briey press the button cover and open
the cover ›››Fig.49.
2. Press and hold the emergency call button
for a few seconds ›››Fig.50
1
.
The emergency call is activated and a voice
connection is established with the emer-
gency coordination centre.
The emergency call can also be activa-
ted manually via the Infotainment system
›››
page307.
If you press the emergency call button inadver-
tently, hang up the call immediately:
1. Press the emergency call button again until
the control light stays green.
Note
Only press the emergency call button
›››Fig.50 in the event of an emergency.
Automatic activation of an emergency call
The automatic emergency call is only activated
if the ignition is switched on.
The connection to the CUPRA emergency
centre is automatically established in the fol-
lowing situations:
●
Immediately after the airbags are triggered.
●
Immediately after activation of the seatbelt
pretensioner.
●
Depending on equipment, in the event of
intervention of the Emergency Assist system.
The automatic emergency call cannot be in-
terrupted by pressing the emergency call but-
ton ›››
Fig.50.
If enquiries from the CUPRA emergency call
centre remain unanswered, rescue measures
are dispatched automatically.
Integrated battery
The integrated battery ensures that the emer-
gency call system remains available for some
time even if the 12-volt battery has been dis-
connected or has failed.
If the integrated battery discharges or is de-
fective, a message stating this is displayed on
the instrument cluster display. Go to a special-
ised workshop and ask for the battery to be
replaced.
EDR data transmission ›››
page401
When an emergency call is made, the available
data are transmitted to the CUPRA emergency
call centre so that the necessary rescue meas-
ures can be determined.
Vehicle location data is continuously overwrit-
ten. This means that the vehicle is not subject
to permanent monitoring.
The data related to the emergency call is only
processed to ensure the correct operation of
the emergency call system (eCall). The system
will automatically delete the data related to the
call a few hours after the call is activated.
The sent data includes:
●
The vehicle's current position at the time the
emergency call is activated.
●
Vehicle identication number (VIN)
●
Type of vehicle and type of drive.
●
Type of activation (automatic or manual).
●
Type of call.
76
Safety
●
Direction in which the vehicle was travelling
at the time the emergency call was activated.
●
Moment of the collision.
●
Estimated number of vehicle occupants.
●
Language selected in the infotainment sys-
tem.
WARNING
The following conditions may mean that it
is not possible to make a public or private
emergency call, either manually or automat-
ically, or that it is only possible to a limited
extent:
●
The emergency call is made in an area with
little or no mobile or GPS coverage.
●
In areas with suicient mobile and GPS sig-
nal reception, the mobile network of the tel-
ecommunication providers is not available. In
this case, the emergency call, if available in
the vehicle, uses the legally required emer-
gency call system.
●
In areas with suicient mobile and satellite
signal reception, a 2G/3G mobile telecom-
munication provider network is not available.
●
In some countries, the emergency call
service may not be available and depending
on the location of the vehicle, the control
lamp LEDs, and even the operation of the dif-
ferent types of calls, could behave in a spe-
cic way.
●
There is no valid licence for the use of the
emergency call service.
●
The components of the vehicle required
for the emergency phone call are damaged
or do not get enough power.
●
The emergency call service function has
been deactivated via the web or the App. In
this case, the emergency call, if available in
the vehicle, is forwarded to the public emer-
gency call service automatically.
●
The emergency call service function has
been deactivated by preventing the trans-
mission of data (privacy mode). In this case,
the emergency call, if available in the vehi-
cle, calls the public emergency call system. If
the private emergency call system cannot be
executed for technical reasons, calls are for-
warded to the public emergency call service
automatically.
●
The vehicle’s ignition is not on.
Note
The operation of the emergency call system,
which is required by law, may be limited if an
infotainment system is retrotted
Note
The emergency call, breakdown call and in-
formation service are only available in certain
countries.
eCall emergency call service, re-
quired by law
Depending on the equipment and the country,
the vehicle may be tted with an emergency
call system. In some countries, the free public
emergency call system is activated by default.
The control element is located on the roof
console ›››
Fig.49.
With the emergency call, help can be organ-
ised as quickly as possible in emergency situa-
tions. A voice connection is established with
a public rescue coordination centre. The tele-
phone contact person communicates in the
language of the country in which the vehicle is
located. In addition, any legally required data
relevant to emergency calls is automatically
transmitted to the public rescue control cen-
tre, such as the vehicle's current location.
The required connection is made via a factory-
installed control unit. Additional components
such as an emergency call microphone, an
emergency loudspeaker and an integrated bat-
tery which is independent of the integrated
power supply, are required to ensure operation
even after a serious accident.
Activating an emergency call manually
1. Briey press the button cover
and open
the cover ›››Fig.49.
2. Press and hold the emergency call button
for a few seconds ›››Fig.50
1
.
Safety
77
In case of emergency
The emergency call is activated and a voice
connection is established with the emer-
gency coordination centre.
If you press the emergency call button inadver-
tently, hang up the call immediately:
1. Press the emergency call button again until
the control light stays green.
Note
Only press the emergency call button
›››Fig.50 in the event of an emergency.
Automatic activation of an emergency call
The automatic emergency call is only activated
if the ignition is switched on.
A connection to the public rescue coordina-
tion centre is automatically established in the
following situations:
●
Immediately after the airbags are triggered.
●
Immediately after activation of the seatbelt
pretensioner.
●
Depending on equipment, in the event of
intervention of the Emergency Assist system.
The automatic emergency call cannot be in-
terrupted by pressing the emergency call but-
ton ›››
Fig.50.
If the public rescue control centre's questions
remain unanswered, the rescue response be-
gin automatically.
Troubleshooting
Fault in the emergency call service.
The control lamp of the emergency call button
lights up in red and stays on. In addition, the
following message may appear on the instru-
ment cluster display:
Error: Emergency call function. Work-
shop!
There is a fault in the emergency call service.
In this case, you will not be able to make any
emergency calls.
1. Immediately visit a qualied specialist
workshop and have the fault repaired.
CUPRA recommends a CUPRA dealership.
Limited emergency call service
The control lamp of the emergency call button
lights up in red and stays on. In addition, the
following message may appear on the instru-
ment cluster display:
Emergency call function limited. Work-
shop!
The Emergency Call Service is only available
with limitations. E.g. no voice connection to
the CUPRA emergency call centre can be es-
tablished.
1. Immediately visit a qualied specialist
workshop and have the fault repaired.
CUPRA recommends a CUPRA dealership.

Related Topics

Popular Owner Manuals