2024-2026 Cupra Terramar SUV Safety -> Seat belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety -> Seat belts for Your Cupra Terramar SUV First Generation (2024-2026)

46
Safety
ting positions substantially reduce the protec-
tive function of seat belts and, therefore, in-
crease the risk of severe or even fatal injuries.
The risk of severe or fatal injuries is especially
heightened when a deploying airbag strikes a
vehicle occupant who has assumed an incor-
rect sitting position. The driver is responsible
for all people, particularly children, inside the
vehicle.
The following list contains examples of incor-
rect sitting positions that could be dangerous
for all vehicle occupants.
When the vehicle is in motion:
●
Never stand in the vehicle.
●
Never stand on the seats.
●
Never kneel on the seats.
●
Never tilt your seat backrest too far to the
rear.
●
Never lean against the dash panel.
●
Never lie on the rear seats.
●
Never sit on the front edge of a seat.
●
Never sit sideways.
●
Never lean out of a window.
●
Never put your feet out of a window.
●
Never put your feet on the dash panel.
●
Never place your feet on the bench or on the
backrest of the seat.
●
Never travel in a footwell.
●
Never sit on the armrests.
●
Never travel without wearing the seat belt.
●
Never travel in the luggage compartment.
WARNING
Sitting in an incorrect position increases the
risk of severe or fatal injuries in the event
of accidents and sudden braking or manoeu-
vres.
●
All occupants must sit correctly during the
journey and wear the seat belt correctly.
●
Vehicle occupants that are not sitting cor-
rectly, not wearing the seat belt or are not at
a proper distance of the airbag risk suering
very serious or fatal injuries, especially if the
airbags deploy and strike them.
Seat belts
Introduction
Fig.19 Drivers with properly worn seat
belts will not be thrown forward in the event
of sudden braking.
Properly worn seat belts hold the occupants
in the proper position. They also help prevent
uncontrolled movements that may result in se-
rious injury and reduce the risk of being thrown
out of the vehicle in case of an accident.
Vehicle occupants wearing their seat belts cor-
rectly benet greatly from the ability of the
belts to absorb kinetic energy. In addition, the
front part of your vehicle and other passive
safety features (such as the airbag system) are
designed to absorb the kinetic energy released
in a collision. Taken together, all these features
reduce the released kinetic energy and conse-
Safety
47
Seat belts
quently, the risk of injury. This is why it is so
important to fasten seat belts before every trip,
even when "just driving around the corner".
Ensure that your passengers wear their seat
belts as well. Accident statistics have shown
that wearing seat belts is an eective means of
substantially reducing the risk of injury and im-
proving the chances of survival when involved
in a serious accident. Furthermore, properly
worn seat belts improve the protection provi-
ded by airbags in the event of an accident. For
this reason, wearing a seat belt is required by
law in most countries.
Although your vehicle is equipped with airbags,
the seat belts must be fastened and worn. The
front airbags, for example, are only triggered in
some cases of head-on collision. The front air-
bags will not be triggered during minor head-
on or side collisions, rear-end collisions, over-
turns or accidents in which the airbag trigger
threshold value in the control unit is not ex-
ceeded.
Important safety instructions for the use of
seat belts
●
Always wear the seat belt as described in this
section.
●
Ensure that the seat belts can be fastened at
all times and are not damaged.
WARNING
●
If seat belts are worn incorrectly or not at
all, the risk of severe or fatal injuries increa-
ses. The optimal protection from seat belts
can be achieved only if you use them prop-
erly.
●
Never allow two passengers (even children)
to share the same seat belt.
●
Never unbuckle a seat belt while the vehi-
cle is in motion. Risk of fatal injury.
●
The seat belt should never lie on hard or
fragile objects (such as glasses or pens, etc.)
because this can cause injuries.
●
Do not allow the seat belt to be damaged or
jammed, or to rub on any sharp edges.
●
Never wear the seat belt under the arm or
in any other incorrect position.
●
Bulky and unfastened clothing (such as an
overcoat over a sweater) impairs the proper
t and function of the seat belts, reducing
their ability to protect.
●
The slot in the seat belt buckle must not be
blocked with paper or other objects, as this
can prevent the latch plate from engaging
securely.
●
Never use seat belt clips, fastening rings or
similar items to alter the position of the belt
webbing.
●
Frayed or torn seat belts or damage to
the connections, belt retractors or parts of
the buckle could cause severe injuries in the
event of an accident. Therefore, you must
check the condition of all seat belts at regu-
lar intervals.
●
Seat belts which have been worn in an ac-
cident and have been stretched must be re-
placed by a specialised workshop. Renewal
may be necessary even if there is no appa-
rent damage. The belt anchorage should also
be checked.
●
Do not attempt to repair a damaged seat
belt yourself. The seat belts must not be re-
moved or modied in any way.
●
The belts must be kept clean, otherwise
the retractors may not work properly.
Seat belt buckled indication
Lights up red
The driver or one of the passengers have
not fastened their seat belts.
The control lamp
lights up to remind the
driver to fasten their seat belt.
Before starting the vehicle:
●
Fasten your seat belt securely.
●
Instruct your passengers to fasten their seat
belts properly before driving o.
●
Protect children by using a child seat ac-
cording to the child's height and weight
›››page62.
48
Safety
Fig.20 Instrument cluster: indication of the
status of the rear seat seat belts.
When the ignition is switched on, the seatbelt
status display ›››
Fig.20 on the instrument
cluster display informs the driver whether the
occupants of the rear seats have their seat
belts fastened.
Depending on seat occupancy and the status
of the seat belts, the vehicle's seats will light up
in dierent colours:
A white light indicates that the corre-
sponding seat is not occupied.
A green light indicates that the seat’s oc-
cupant is wearing the seat belt.
A red light indicates that the seat is occu-
pied and the occupant is not wearing the
seat belt.
If a speed of 25km/h (15mph) is exceeded
after moving o without the driver or a front
passenger seatbelt being fastened, or if the
seatbelt is unfastened while driving, an audible
signal will sound for 126 seconds. In addition,
the warning lamp on the instrument cluster
display ashes.
The lamp
goes out when the ignition is
on and all occupants have fastened their seat
belts.
Head-on collisions and the laws of
physics
Fig.21 A driver not wearing a seat belt
may be thrown forward violently.
Fig.22 Any rear seat occupants not
wearing a seat belt may be thrown forward
violently, hitting the driver who is wearing
the seat belt.
The eects of the laws of physics in the case
of a head-on collision are easy to explain: the
moment a vehicle starts moving, a type of en-
ergy called “kinetic energy” starts acting on
both the vehicle and its passengers.
The amount of “kinetic energy” depends on
the speed of the vehicle and on the weight
of the vehicle and of its passengers. The taller
they are, the more energy there is to be “ab-
sorbed” in the event of an accident.
The most signicant factor, however, is the
speed of the vehicle. If the speed doubles from
25 km/h (15mph) to 50 km/h (30mph), for
example, the corresponding kinetic energy is
multiplied by four.
Safety
49
Seat belts
Even at speeds of 30 km/h (19 mph) to 50
km/h (30 mph), the forces acting on bodies in
a collision can easily exceed one tonne (1000
kg). At greater speed these forces are even
higher.
Vehicle occupants not wearing seat belts are
not “attached” to the vehicle. In a head-on
collision, they will move forward at the same
speed their vehicle was travelling just before
the impact. This example applies not only to
head-on collisions, but to all accidents and
collisions.
Even at low speeds the forces acting on the
body in a collision are so great that it is not
possible to brace oneself with one's hands. In
the event of a head-on collision, vehicle occu-
pants not wearing a seat belt will be thrown
uncontrollably forward and will collide, for ex-
ample, against the steering wheel, dash panel
or windscreen ›››Fig.21.
It is also important for rear passengers to wear
seat belts properly, as they could otherwise be
thrown forward violently through the vehicle
interior in an accident. If a rear seat occupant
is not wearing a seat belt, they are not only en-
dangering themselves but also the occupants
of the front seats ›››Fig.22.
Fastening and unfastening the seat
belt
Fig.23 Insert the latch plate of the seat
belt into the buckle.
Fig.24 Release the seat belt's latch plate.
Properly worn seat belts hold the vehicle occu-
pants in the position that best protects them
in the event of an accident or sudden braking
›››
.
Fastening the seat belt
Fasten your seat belt before each trip.
●
Adjust the front seat and headrest correctly
›››page44.
●
Engage the seat backrest of the rear seat in
an upright position ››› .
●
Pull the latch plate and place the belt web-
bing evenly across your chest and lap. Do not
twist the seat belt when doing so ››› .
●
Insert the buckle plate in the buckle of the
correct seat ›››Fig.23.
●
Pull the belt to ensure that the latch plate is
securely engaged in the buckle.
Releasing the seat belt
Only unfasten the seat belt when the vehicle
has come to a standstill ››› .
●
Press the red button on the buckle
›››Fig.24. The latch plate is released from
the buckle.
●
Guide the belt back by hand so that it rolls up
easily and does not damage the trim.
50
Safety
WARNING
●
The seat belt cannot oer its full protec-
tion unless the seat backrest is in an upright
position and the seat belt is worn correctly,
according to your size.
●
Unbuckling your seat belt while the vehicle
is in motion can cause severe or fatal injuries
in the event of an accident or sudden brak-
ing.
●
The seat belt itself, or a loose seat belt, can
cause severe injuries if the belt moves from
hard areas of the body to soft areas (e.g. the
stomach).
Correct position of the seat belt
Fig.25 Correct seat belt and headrest
positions, viewed from front and the side.
Fig.26 Position of seat belt during
pregnancy.
Seat belts oer their maximum protection in
the event of an accident and reduce the risk
of sustaining severe or fatal injuries only when
they are properly positioned. Furthermore, if
the webbing is correctly positioned, the seat
belt will hold the vehicle occupants in the op-
timum position to ensure the airbag provides
the maximum protection. The seat belt must
therefore always be worn and the webbing cor-
rectly positioned.
Incorrectly worn seat belts can cause severe or
even fatal injuries ›››
page44, Correct sitting
position of vehicle occupants.
●
The shoulder part of the seat belt must lie
on the centre of the shoulder, never across the
neck or the arm, under the arm or behind the
back.
●
The lap part of the seat belt must lie across
the pelvis, never across the stomach.
●
The seat belt must lie at and t comfortably.
Pull the belt tight if necessary to take up any
slack.
In the case of pregnant women, the seat belt
should pass uniformly over the chest and as
low as possible over the pelvic area with the
strap at so it does not press down on the ab-
domen; in addition, it must be used through-
out the entire pregnancy ›››Fig.26.
Adapting the position of the belt webbing to
your size
The seat belt can be adapted using the follow-
ing equipment:
●
Front seat belts with height adjustment.
●
Front seat height adjustment.
WARNING
An incorrectly worn seat belt web can cause
severe or fatal injuries in the event of an acci-
dent.
●
The shoulder part of the seat belt must lie
on the centre of the shoulder, never under
the arm or across the neck.
●
The seatbelt must lie at and t comforta-
bly across the upper body.
Safety
51
Seat belts
1)
Only if tted with the PreCrash System.
●
The lap part of the seat belt must lie across
the pelvis, never across the stomach. The
seat belt must lie at and t comfortably on
the pelvis. Pull the belt tight if necessary to
take up any slack.
●
In the case of pregnant women, the ab-
dominal strap of the seat belt should pass
as low as possible across the pelvic area,
resting at and “surrounding” the abdomen
›››Fig.26.
●
Do not twist the seat belt while it is fas-
tened.
●
Once the seat belt is positioned correctly,
don't pull it away from your body with your
hand.
●
Do not lie the seat belt across rigid or frag-
ile objects, e.g. glasses, pens or keys.
●
Never use seat belt clips, securing rings or
similar instruments to alter the position of
the belt webbing.
Note
If your physical constitution prevents you
from maintaining the correct position of the
belt webbing, contact a specialised workshop
for help with any special devices to ensure
the optimum protection of the seat belt and
airbag. CUPRA recommends taking your car
in for technical service.
Seat belt height adjustment
Fig.27 Near the front seats: seat belt height
regulator.
Using the height adjusters for the front seats,
the position of the seat belts can be adjusted
in the shoulder area according to the height
of the occupant, so that the seatbelt can be
fastened correctly:
●
Keep the guide device pressed down in the
direction of the arrow ›››Fig.27.
●
Move the guide device up or down until the
seat belt lies over the centre of your shoulder
›››page50, Correct position of the seat
belt.
●
Release the guide device.
●
Pull the belt sharply to check that the device
is engaged securely.
WARNING
Never adjust the belt height while the vehicle
is in motion.
Automatic retractor, tensioner and
belt force limiter
Vehicle seat belts are part of the vehicle’s
safety system ›››
page44. This system has the
following important functions:
Automatic belt retractor
The seat belt shoulder straps on the driver's
and front passenger seats, as well as those on
the rear side seats (and, depending on equip-
ment, also the seat belt of the central rear
seat) are tted with automatic retractors. This
device ensures complete freedom of move-
ment when the shoulder strap is pulled gently
or during normal driving. However, during sud-
den braking, when driving in the mountains,
around bends and when accelerating, the re-
tractor locks the seat belt if it extends rapidly.
In critical driving situations, e.g. in the event
of emergency braking or in the case of over-
steer and understeer, the proactive occupant
protection can tension the front seat belts au-
tomatically if they are worn
1)
. The two belts are
loosened again if an accident does not happen
52
Safety
1)
Only if tted with the PreCrash System.
or when the critical situation passes. Proactive
occupant protection is ready to operate again
›››
page53.
Seat belt tensioner
The seat belts on the front seats and side rear
seats are tted with tensioners.
The tensioners are activated by sensors in the
event of severe head-on, side and rear colli-
sions (in hybrid vehicles they are also activated
in the event of a roll-over), and they tension
the seat belts in a direction opposite their ex-
tension.
If the seat belt is slack, the tensioner tightens
it. This cushions the forward movement of oc-
cupants towards the impact.
The belt pre-tensioners work in combination
with the airbag system. The belt pre-tensioners
activate in combination with some of the air-
bags, depending on the collision type.
When activated, a ne powder may be re-
leased. This is completely normal and it is not
an indication of re in the vehicle.
WARNING
The seatbelt pre-tensioners are only activa-
ted once and the system must be replaced if
they are triggered.
●
Have any triggered pretensioners and af-
fected parts of the system replaced immedi-
ately with new parts approved by CUPRA for
this vehicle.
●
Repairs and modications to the vehicle
should only be made by qualied special-
ist workshops. They have the necessary di-
agnostic equipment, repair information and
tools, as well as qualied personnel. CUPRA
recommends a CUPRA dealership.
●
Never t belt pretensioner parts removed
from vehicles at the end of their useful life,
or pretensioners from recycling plants to the
vehicle.
●
Never modify any component of the belt
pretensioners.
Reversible belt tensioning (proactive occu-
pant protection)
A reversible tensioning of the seat belts
may occur in certain driving situations
›››page53. For example:
●
in the event of sudden braking
●
in the event of oversteering or understeering
●
in the event of minor collisions
Belt force limiter
Depending on the equipment and the country
in question, in the event of an accident, the
seat belt force limiter reduces the force the
seat belt exerts on the body.
Note
●
After certain driving situations, the reversi-
ble belt tensioners may be left permanently
tensioned
1)
. In this case, to loosen the belt, it
must be removed manually while the vehicle
is stationary and then replaced correctly.
●
The relevant safety requirements must be
observed if the vehicle or any components
of the system are to be scrapped. Specialised
workshops are aware of these requirements.
Maintenance and disposal of seat
belt tensioners
The belt tensioners are components of the
seat belts that are installed in the seats of your
vehicle. If you work on the belt tensioners or
remove and install parts of the system when
performing other repair work, the seat belt
may be damaged. The consequence may be
that, in the event of an accident, the belt ten-
sioners function incorrectly or may not func-
tion at all.

Related Topics

Popular Owner Manuals