2024-2026 Cupra Terramar SUV Safety -> In case of emergency User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety -> In case of emergency for Your Cupra Terramar SUV First Generation (2024-2026)

72
Safety
Fitting a child seat using the seat belt
Fig.47 On rear seats: installing a child seat.
●
Set the height of the seat belt such that
it adapts to the child seat naturally, without
twisting. The lowest position of the seat belt
height regulator must be used with rear-facing
child seats.
●
Put the seat belt in place and pass it through
the child seat according to the instructions of
the child seat manufacturer.
●
Make sure that the seat belt is not twisted.
●
Insert the latch plate into the seat's buckle
until you hear the engagement click.
WARNING
When travelling, children must be secured in
the vehicle with a restraint system suitable
for age, weight and size.
●
Always read and observe information and
warnings concerning the use of child seats
›››page64.
In case of emergency
Hazard warning lights
Fig.48 Centre console: hazard warning
lights button.
The hazard warning lights are used to draw the
attention of other road users to your vehicle in
emergencies.
If your vehicle is stationary:
1. Park the vehicle at a safe distance from
road traic.
2. Press the button to switch on the hazard
warning lights ›››
.
3. Apply the electronic parking brake.
4. Stop the engine.
5. Press the parking lock button P.
6. Follow the legal provisions of each coun-
try (reective vest, warning triangles, light
beacon, etc.).
7. Always carry the key with you when leaving
the vehicle.
All turn signals ash simultaneously when the
hazard warning lights are switched on. The two
turn signal lamps and the turn signal lamp
in the switch will ash at the same time. The
simultaneous hazard warning lights also work
when the ignition is switched o.
While the hazard warning lights are on, you can
signal a direction or lane change, e.g. during
towing, by operating the turn signal lever. The
hazard warning lights remain switched o dur-
ing this time.
Emergency braking warning
If the vehicle brakes suddenly and continu-
ously at a speed of more than 80 km/h (50
mph), the brake light ashes several times per
second to warn the vehicles driving behind.
If you continue braking, the hazard warning
lights will come on automatically when the
Safety
73
In case of emergency
vehicle comes to a standstill. They switch o
automatically when the vehicle starts to move
again.
WARNING
●
The risk of an accident increases if your
vehicle breaks down. Always use the hazard
warning lights and a warning triangle (or light
beacon, depending on the country) to draw
the attention of other road users to your sta-
tionary vehicle.
●
Never leave anybody inside the vehicle,
particularly children or anybody who may
need help. This is especially important when
the doors are locked. Individuals locked in
the vehicle can be exposed to very high or
very low temperatures.
●
Due to the high temperatures that the
catalytic converter can reach, never park in
an area where the catalytic converter could
come into contact with highly inammable
materials, for example dry grass or spilt pet-
rol. This could start a re.
Note
●
The 12-volt vehicle battery will run down
if the hazard warning lights are left on for a
long time (even if the ignition is switched o).
●
The use of the hazard warning lights de-
scribed here is subject to the relevant statu-
tory requirements.
Behaviour in the event of an acci-
dent or re
Actions to take in the event of a re or acci-
dent
For your own safety and that of other passen-
gers, the following points should be observed
in the order given ›››
:
●
Switch o the engine.
●
If possible, switch on the hazard warning
lights ›››page72.
●
Follow the legal provisions of each country
(reective vest, warning triangles, light beacon,
etc.).
●
If necessary, get any people out of the haz-
ard area and apply rst aid.
●
Notify the emergency services.
●
Wait at a safe distance from the scene of the
accident for the emergency services to arrive.
●
In case of re, do not attempt to extinguish
the re yourself or remain near the vehicle.
WARNING
For your own safety, do not ignore this im-
portant check list, otherwise accidents and
serious injuries could occur.
●
Always complete the operations on the
check list and always bear in mind the gen-
eral safety measures.
WARNING
In the event of re, an explosion may occur
and substances harmful to health may be re-
leased, which can cause serious injury.
●
Never stay near the burning vehicle.
Information call, Assistance call
and Emergency call service
Fig.49 On the roof console: controls for
voice services.
74
Safety
Fig.50 Emergency call button.
Depending on the equipment, an emergency
call system may be located on the roof con-
sole.
The following voice services can be run by
pressing the buttons
, and ›››Fig.49:
●
Information call.
●
Assistance call.
●
Emergency call service.
A built-in control unit establishes the connec-
tion.
When a voice service is activated, a connec-
tion is established with a phone line.
Control lamp.
There is a control lamp on the control
›››
Fig.49 (arrow). It shows the following sta-
tuses:
●
O: the eCall service is not available.
●
Flashes in red, approx. 20 seconds after
switching on the ignition: the eCall service is
deactivated.
●
Lights up red: system failure. The eCall serv-
ice is available with certain restrictions. CUPRA
suggests going to a specialised workshop.
●
Lights up green: the eCall service is availa-
ble. The system is ready to work in the vehicle.
●
Flashes green: There is an ongoing voice
connection.
Assistance call
With the breakdown call you can directly re-
quest specialised help in the event of a break-
down.
Parallel to the voice call, some vehicle data is
transmitted, e.g. your current location.
Information call
With an information call, a call is placed to
CUPRAS.A. customer care service.
Note
Breakdown service and information calls can
incur an additional cost on your telephone
bill.
Types of emergency call
●
Public (mandatory by law): emergency call
made to the emergency services of the coun-
try you are driving in, in the language of that
country. ›››page76.
●
Private: an emergency call that is made to
a “CUPRA call centre”, which oers improved
customer service, such as service in the lan-
guage selected in the infotainment system. At
any time, the user can choose to cancel the
private emergency call in order to be attended
by the country's emergency services.
Private emergency call
If the private emergency call service is availa-
ble in the vehicle's service portfolio, the emer-
gency call service is activated by default for a
limited period of time.
●
The emergency call service can be used
to organise help as quickly as possible in an
emergency situation.
●
When the emergency call service is activa-
ted, a connection is made to the CUPRA emer-
gency call centre.
●
If an emergency call is made manually or,
in the event of an accident, when the airbag
or seatbelt pretensioner is triggered, the data
relevant to the emergency call will be transmit-
ted automatically, for example, the current lo-
cation of the vehicle ›››
page401.
Safety
75
In case of emergency
●
The telephone contact person communi-
cates in the language set in the vehicle's Info-
tainment system. If this language is not availa-
ble at the location where the emergency call is
currently being made, English will be used.
●
Additional components such as an emer-
gency call microphone, an emergency loud-
speaker and an integrated battery which is sep-
arate from the integrated power supply, are in-
stalled to ensure operation even after a serious
accident.
●
The emergency call service can be deacti-
vated permanently by a qualied specialist.
CUPRA recommends that you contact an oi-
cial CUPRA service or a SEAT oicial service.
●
If the public emergency call system is avail-
able in the vehicle, the private emergency
call service can be deactivated via the web
or app, or by preventing data transmission in
the Infotainment system, via the privacy mode
›››page273.
Starting an emergency call manually
1. Briey press the button cover and open
the cover ›››Fig.49.
2. Press and hold the emergency call button
for a few seconds ›››Fig.50
1
.
The emergency call is activated and a voice
connection is established with the emer-
gency coordination centre.
The emergency call can also be activa-
ted manually via the Infotainment system
›››
page307.
If you press the emergency call button inadver-
tently, hang up the call immediately:
1. Press the emergency call button again until
the control light stays green.
Note
Only press the emergency call button
›››Fig.50 in the event of an emergency.
Automatic activation of an emergency call
The automatic emergency call is only activated
if the ignition is switched on.
The connection to the CUPRA emergency
centre is automatically established in the fol-
lowing situations:
●
Immediately after the airbags are triggered.
●
Immediately after activation of the seatbelt
pretensioner.
●
Depending on equipment, in the event of
intervention of the Emergency Assist system.
The automatic emergency call cannot be in-
terrupted by pressing the emergency call but-
ton ›››
Fig.50.
If enquiries from the CUPRA emergency call
centre remain unanswered, rescue measures
are dispatched automatically.
Integrated battery
The integrated battery ensures that the emer-
gency call system remains available for some
time even if the 12-volt battery has been dis-
connected or has failed.
If the integrated battery discharges or is de-
fective, a message stating this is displayed on
the instrument cluster display. Go to a special-
ised workshop and ask for the battery to be
replaced.
EDR data transmission ›››
page401
When an emergency call is made, the available
data are transmitted to the CUPRA emergency
call centre so that the necessary rescue meas-
ures can be determined.
Vehicle location data is continuously overwrit-
ten. This means that the vehicle is not subject
to permanent monitoring.
The data related to the emergency call is only
processed to ensure the correct operation of
the emergency call system (eCall). The system
will automatically delete the data related to the
call a few hours after the call is activated.
The sent data includes:
●
The vehicle's current position at the time the
emergency call is activated.
●
Vehicle identication number (VIN)
●
Type of vehicle and type of drive.
●
Type of activation (automatic or manual).
●
Type of call.
76
Safety
●
Direction in which the vehicle was travelling
at the time the emergency call was activated.
●
Moment of the collision.
●
Estimated number of vehicle occupants.
●
Language selected in the infotainment sys-
tem.
WARNING
The following conditions may mean that it
is not possible to make a public or private
emergency call, either manually or automat-
ically, or that it is only possible to a limited
extent:
●
The emergency call is made in an area with
little or no mobile or GPS coverage.
●
In areas with suicient mobile and GPS sig-
nal reception, the mobile network of the tel-
ecommunication providers is not available. In
this case, the emergency call, if available in
the vehicle, uses the legally required emer-
gency call system.
●
In areas with suicient mobile and satellite
signal reception, a 2G/3G mobile telecom-
munication provider network is not available.
●
In some countries, the emergency call
service may not be available and depending
on the location of the vehicle, the control
lamp LEDs, and even the operation of the dif-
ferent types of calls, could behave in a spe-
cic way.
●
There is no valid licence for the use of the
emergency call service.
●
The components of the vehicle required
for the emergency phone call are damaged
or do not get enough power.
●
The emergency call service function has
been deactivated via the web or the App. In
this case, the emergency call, if available in
the vehicle, is forwarded to the public emer-
gency call service automatically.
●
The emergency call service function has
been deactivated by preventing the trans-
mission of data (privacy mode). In this case,
the emergency call, if available in the vehi-
cle, calls the public emergency call system. If
the private emergency call system cannot be
executed for technical reasons, calls are for-
warded to the public emergency call service
automatically.
●
The vehicle’s ignition is not on.
Note
The operation of the emergency call system,
which is required by law, may be limited if an
infotainment system is retrotted
Note
The emergency call, breakdown call and in-
formation service are only available in certain
countries.
eCall emergency call service, re-
quired by law
Depending on the equipment and the country,
the vehicle may be tted with an emergency
call system. In some countries, the free public
emergency call system is activated by default.
The control element is located on the roof
console ›››
Fig.49.
With the emergency call, help can be organ-
ised as quickly as possible in emergency situa-
tions. A voice connection is established with
a public rescue coordination centre. The tele-
phone contact person communicates in the
language of the country in which the vehicle is
located. In addition, any legally required data
relevant to emergency calls is automatically
transmitted to the public rescue control cen-
tre, such as the vehicle's current location.
The required connection is made via a factory-
installed control unit. Additional components
such as an emergency call microphone, an
emergency loudspeaker and an integrated bat-
tery which is independent of the integrated
power supply, are required to ensure operation
even after a serious accident.
Activating an emergency call manually
1. Briey press the button cover
and open
the cover ›››Fig.49.
2. Press and hold the emergency call button
for a few seconds ›››Fig.50
1
.
Safety
77
In case of emergency
The emergency call is activated and a voice
connection is established with the emer-
gency coordination centre.
If you press the emergency call button inadver-
tently, hang up the call immediately:
1. Press the emergency call button again until
the control light stays green.
Note
Only press the emergency call button
›››Fig.50 in the event of an emergency.
Automatic activation of an emergency call
The automatic emergency call is only activated
if the ignition is switched on.
A connection to the public rescue coordina-
tion centre is automatically established in the
following situations:
●
Immediately after the airbags are triggered.
●
Immediately after activation of the seatbelt
pretensioner.
●
Depending on equipment, in the event of
intervention of the Emergency Assist system.
The automatic emergency call cannot be in-
terrupted by pressing the emergency call but-
ton ›››
Fig.50.
If the public rescue control centre's questions
remain unanswered, the rescue response be-
gin automatically.
Troubleshooting
Fault in the emergency call service.
The control lamp of the emergency call button
lights up in red and stays on. In addition, the
following message may appear on the instru-
ment cluster display:
Error: Emergency call function. Work-
shop!
There is a fault in the emergency call service.
In this case, you will not be able to make any
emergency calls.
1. Immediately visit a qualied specialist
workshop and have the fault repaired.
CUPRA recommends a CUPRA dealership.
Limited emergency call service
The control lamp of the emergency call button
lights up in red and stays on. In addition, the
following message may appear on the instru-
ment cluster display:
Emergency call function limited. Work-
shop!
The Emergency Call Service is only available
with limitations. E.g. no voice connection to
the CUPRA emergency call centre can be es-
tablished.
1. Immediately visit a qualied specialist
workshop and have the fault repaired.
CUPRA recommends a CUPRA dealership.

Related Topics

Popular Owner Manuals