107
Driving
06
If the driver no longer wishes to use the system
for a while, they can deactivate it by pressing the
button again.
The indicator lamp in the button goes off and the
symbol disappears from the instrument panel.
state of the road surface require their
Activation/Deactivation
intervention, by moving the steering wheel to
temporarily suspend system operation. Any
action on the brake pedal that results in cruise
control being paused will also cause the
system to be paused.
The system status is saved when the
ignition is switched off.
If the system detects that the driver is not
holding the wheel firmly enough, it
triggers a series of gradual alerts and then
deactivates itself if there is no response from
the driver.
Cruise control
►ꢀ With the Adaptive Cruise Control with Stop &
Go function activated, press this button.
The action is confirmed by:
– The indicator lamp in the button lighting up
green.
– The following symbol being displayed on the
instrument panel.
The colour of the symbol on the instrument panel
depends on the operating status of the system:
(grey colour)
One or more operating conditions is not
met; the system is paused.
(green colour)
All operating conditions are met; the
system is active.
The driver must hold the steering wheel properly.
When cruise control is activated, the symbol is
displayed in green: by small steering actions, the
system directs the vehicle and keeps it in the
position chosen by the driver, in the traffic lane.
This position is not necessarily the centre of the
lane.
If the function is suspended due to the
prolonged release of the force holding the
steering wheel, you must reactivate it by
pressing the button again.
The driver can feel movements in the steering
wheel.
Automatic pause
The driver can change the position of the vehicle
at any time, by turning the steering wheel, which
suspends the function. The driver positions the
vehicle where they wish to in the lane. When
the driver feels that the vehicle’s position is
appropriate, they maintain it until the function
is reactivated. The system regains control by
regulating on the new defined position.
– Triggering of the ESC.
– Prolonged failure to detect one of the lane
limit markings. In this case, the active lane
departure warning function can take over, and the
system will reactivate itself once the operating
conditions are again met.
(orange colour)
System malfunction.
In response to action by the driver: suspension
– Activation of the direction indicators.
– Travelling outside the lane limits.
– Too tight a grip on the steering wheel or
dynamic action on the steering wheel.
For vehicles equipped with a head-up
display, the information is projected onto
the blade.
Pausing/Suspending the
system
– Action on the brake pedal (resulting in a pause
until cruise control is reactivated) or accelerator
The driver must act promptly if they
believe that the traffic conditions or the
English 
