Driving -> Gear shift indicator for Your DS 3 Crossback 4 Door First Generation (2018-2022)

91  
Driving  
06  
This system is only active when:  
– The vehicle is completely stationary, with your  
foot on the brake pedal.  
– Certain slope conditions are met.  
– The driver’s door is closed.  
On an ascending slope, with the vehicle  
stationary, the vehicle is held for a short time  
when you release the brake pedal:  
– provided you are in first gear or neutral with a  
manual gearbox.  
– provided you are in mode D or M with an  
automatic gearbox.  
– provided you are in mode D or B with a drive  
selector.  
System which reduces fuel consumption by  
recommending the most appropriate gear.  
Operation  
Depending on the driving situation and the  
vehicle's equipment, the system may advise  
skipping one or more gears.  
Gear engagement recommendations are only  
optional. In fact, the configuration of the road,  
the traffic density and safety remain determining  
factors when choosing the best gear. Therefore,  
the driver remains responsible for deciding  
whether or not to follow the system’s advice.  
This function cannot be deactivated.  
Do not leave the vehicle while it is being  
held temporarily by hill start assist.  
If someone needs to get out of the vehicle with  
the engine running, apply the parking brake  
manually. After that, ensure that the parking  
brake indicator lamp and the indicator lamp P  
in the electric parking brake control lever are  
on fixed.  
With an automatic gearbox, the system is  
only active in manual operation.  
The hill start assist function cannot be  
deactivated. However, use of the parking  
brake to immobilise the vehicle interrupts its  
operation.  
The information appears in the instrument  
panel in the form of an arrow and the  
recommended gear.  
On a descending slope, with the vehicle stationary  
and reverse gear engaged, the vehicle is held for a  
short time when you release the brake pedal.  
Operation  
The system adapts its gear shift  
recommendation according to the driving  
conditions (slope, load, etc.) and the driver’s  
requirements (power, acceleration, braking,  
etc.).  
Malfunction  
These warning lamps come on in  
the event of a malfunction.  
Contact a dealer or a qualified workshop to have  
the system checked.  
The system never suggests:  
– engaging first gear,  
– engaging reverse.  
Gear shift indicator  
(Depending on engine.)