102
Driving
06
►ꢀ Pressing button 4 temporarily pauses the
function.
►ꢀ Pressing button 4 again restores operation of
the cruise control (ON).
►ꢀ Press button 5 to display the memorised speed
settings.
►ꢀ Press the touch screen button for the desired
speed setting.
The selection screen closes after a few moments.
This setting becomes the new cruise speed.
To modify the cruise speed setting using the
speed suggested by the Speed Limit Recognition
and Recommendation shown on the instrument
panel:
Memorising speeds
This function, used only for the speed limiter and
programmable cruise control, lets you save speed
settings that will subsequently be proposed for
the purpose of configuring these two systems.
You can memorise multiple speed settings for
each of the two systems.
Operation of the cruise control can also be
paused temporarily:
– by pressing the brake pedal.
– automatically, if the electronic stability
control (ESC) system is triggered.
By default, some speed settings are already
memorised.
►ꢀ Press button 5 once; a message is displayed to
confirm the memorisation request.
►ꢀ Press button 5 again to save the suggested
speed.
The speed is immediately shown on the
instrument panel as the new speed setting.
As a safety measure, the driver must only
change speed settings when stationary.
Modifying the cruise speed
setting
Cruise control must be active.
Changing a speed setting
Speed settings can be activated,
deactivated, selected and changed in the
Driving / Vehicle touch screen menu.
To modify the cruise speed setting, based on the
current speed of the vehicle:
►ꢀ Briefly press button 2 or 3 to change the value
in steps of + or - 1 mph (km/h).
►ꢀ Press and hold button 2 or 3 to change the
value in steps of + or - 5 mph (km/h).
Switching off
►ꢀ Turn the thumbwheel 1 to the "OFF" position:
the cruise control information disappears from
the screen.
"MEM" button
Pressing and holding button 2 or 3 results
in a rapid change in the speed of the
vehicle.
Malfunction
As a precaution, we recommend setting a
cruise speed fairly close to the current
speed of your vehicle, to avoid any sudden
acceleration or deceleration of the vehicle.
The display of dashes (flashing then fixed)
indicates a malfunction with the cruise control
system.
Have it checked by a dealer or a qualified
workshop.
With this button, you can select a memorised
speed setting to use with the speed limiter or the
programmable cruise control.
For more information on the Speed limiter or
Cruise control, refer to the corresponding section.
To change the cruise speed setting using
memorised speed settings and from the touch
screen:
English 
