126
Driving
06
an obstacle is detected, or by driver action. If the
driver notices a hazard, they may also interrupt
the manoeuvre permanently.
To suspend the manoeuvre, the driver can:
– Release the function control button.
– Depress the brake pedal.
– Resume control of the steering.
– Change the gearbox status (except changing
to P).
The vehicle is immediately immobilised if the
manoeuvre is suspended.
– Activation of the direction indicator lamps on
the opposite side to that of the manoeuvre.
– In certain cases, when a wheel of the vehicle
hits a pavement or a low obstacle.
– Triggering of anti-slip regulation on a slippery
road.
This symbol is displayed, accompanied by
the message "Manoeuvre completed" on
the touch screen.
When the function is deactivated, this
indicator lamp on the instrument panel
goes off and the original display is restored.
– If entering a parking space, the driver may be
required to complete the manoeuvre. The gearbox
changes to P 4 seconds after completion of the
manoeuvre.
– When exiting a parking space, the gearbox
changes to N when the manoeuvre is complete. A
message and symbols prompt the driver to take
back control of the vehicle.
– Engine stalling.
– Sudden appearance in the field of the
manoeuvre of an obstacle not detected by the
system before the manoeuvre was started, with
the obstacle remaining for more than 30 seconds.
– After 10 manoeuvres to enter or exit a "parallel"
parking space and after 7 manoeuvres to enter a
"bay" parking space,
This is confirmed by the display of this
symbol, accompanied by the message
"Manoeuvre suspended".
Resuming the manoeuvre after resolving the
conditions for suspending it:
– System malfunction during the manoeuvre.
Abandoning the manoeuvre immediately
triggers the vehicle’s brakes and automatically
deactivates the function.
This symbol is displayed, accompanied by
the message "Manoeuvre abandoned" on
the touch screen.
A message prompts the driver to take back
control of the vehicle.
The function is deactivated after a few
seconds; this indicator lamp goes off on
the instrument panel and the initial display is
resumed.
The gearbox automatically changes to mode
P if no action is taken by the driver within 30
secondss.
►ꢀ Release all controls (brake pedal, function
control button, steering wheel, etc.).
►ꢀ Press the function control button again.
Permanent interruption after suspending the
manoeuvre:
Operating limits
– The system may suggest an inappropriate
parking space (parking prohibited, work in
progress with damaged road surface, location
alongside a ditch, etc.).
►ꢀ Depress the brake pedal and engage a gear.
Abandoning the manoeuvre
– The system may indicate that a space has
been found but will not offer it because of a fixed
obstacle on the opposite side of the manoeuvre,
which does not allow the vehicle to follow the
trajectory required for parking.
– The system may indicate that a space has been
found but the manoeuvre will not be triggered
because the width of the lane is insufficient.
– The system is not designed to perform parking
manoeuvres on a steep slope or on a sharp curve.
The manoeuvre is abandoned in the following
situations:
– No action by the driver within 30 seconds of the
manoeuvre being suspended.
– Intentional application of the parking brake.
– Gearbox mode P engaged by the driver.
– Driver's seat belt unfastened.
The system automatically engages gearbox mode
P after 4 seconds.
End of manoeuvre
The vehicle stops as soon as the manoeuvre is
completed.
– Opening of a door or the boot.
English 
