Driving -> Hill start assist for Your DS 3 Crossback 4 Door First Generation (2018-2022)

90  
Driving  
06  
The D on the instrument panel is replaced with  
a B.  
The state of the function is not saved when the  
ignition is switched off.  
ECO  
B. Unlock button  
To unlock the selector and come out of P or  
Reduces fuel consumption by optimising the  
operation of the heating and air conditioning and,  
depending on version, the accelerator pedal, the  
automatic gearbox and the gear shift indicator.  
Free-wheeling in ECO mode: depending on  
version, with the EAT8 gearbox, moving into "free-  
wheeling" is encouraged to slow the vehicle down  
without using engine braking. You can save fuel  
by anticipating the need to slow down and lifting  
your foot fully off the accelerator pedal.  
change to R, with the foot on the brake pedal.  
Press and hold this button before pushing the  
selector.  
If the battery is almost fully charged, the  
braking effect when the accelerator pedal  
is released may be limited.  
C. Selector state indicators (R, N, D/B)  
►ꢀ Move the selector by pushing it forwards (N or  
R) or backwards (N or D/B) once or twice, passing  
the point of resistance if necessary.  
The push selector returns to its initial position  
when released.  
For example, to change from P to R, either push  
forwards twice without passing the point of  
resistance or push just once, passing the point of  
resistance:  
– In the first case, the selector goes from P to N,  
then from N to R.  
– In the second case, the selector goes directly  
from P to R.  
Driving modes  
The number and type of driving modes available  
depend on the vehicle’s engine and equipment.  
Driving modes are selected using the following  
control:  
NORMAL  
Restores the vehicle’s original settings.  
SPORT  
Enables more dynamic driving, acting on the  
power steering, accelerator and gear changes  
with an automatic gearbox and the possibility of  
displaying the vehicle’s dynamic settings on the  
instrument panel.  
MANUAL  
Regenerative braking  
The regenerative braking function emulates  
engine braking, slowing the vehicle with no  
need to depress the brake pedal. The vehicle  
slows more quickly when the driver releases the  
accelerator pedal.  
When the accelerator pedal is released,  
mechanical energy is recovered and used to  
partially recharge the battery.  
Permanent "Manual" mode with an automatic  
gearbox and DS PARK PILOT.  
Enables manual gear changing using the steering-  
mounted paddles.  
With an electric motor, you cannot select a mode  
if the READY lamp is off.  
The selected mode is activated immediately.  
Whenever the ignition is switched on, NORMAL  
mode is selected by default.  
Hill start assist  
This system keeps your vehicle briefly stationary  
(for approximately 2 seconds) when making a hill  
start, while you transfer your foot from the brake  
pedal to the accelerator pedal.  
►ꢀ While in mode D/B, pushing the pulse selector  
backwards activates/deactivates the function.  
91  
Driving  
06  
This system is only active when:  
– The vehicle is completely stationary, with your  
foot on the brake pedal.  
– Certain slope conditions are met.  
– The driver’s door is closed.  
On an ascending slope, with the vehicle  
stationary, the vehicle is held for a short time  
when you release the brake pedal:  
– provided you are in first gear or neutral with a  
manual gearbox.  
– provided you are in mode D or M with an  
automatic gearbox.  
– provided you are in mode D or B with a drive  
selector.  
System which reduces fuel consumption by  
recommending the most appropriate gear.  
Operation  
Depending on the driving situation and the  
vehicle's equipment, the system may advise  
skipping one or more gears.  
Gear engagement recommendations are only  
optional. In fact, the configuration of the road,  
the traffic density and safety remain determining  
factors when choosing the best gear. Therefore,  
the driver remains responsible for deciding  
whether or not to follow the system’s advice.  
This function cannot be deactivated.  
Do not leave the vehicle while it is being  
held temporarily by hill start assist.  
If someone needs to get out of the vehicle with  
the engine running, apply the parking brake  
manually. After that, ensure that the parking  
brake indicator lamp and the indicator lamp P  
in the electric parking brake control lever are  
on fixed.  
With an automatic gearbox, the system is  
only active in manual operation.  
The hill start assist function cannot be  
deactivated. However, use of the parking  
brake to immobilise the vehicle interrupts its  
operation.  
The information appears in the instrument  
panel in the form of an arrow and the  
recommended gear.  
On a descending slope, with the vehicle stationary  
and reverse gear engaged, the vehicle is held for a  
short time when you release the brake pedal.  
Operation  
The system adapts its gear shift  
recommendation according to the driving  
conditions (slope, load, etc.) and the driver’s  
requirements (power, acceleration, braking,  
etc.).  
Malfunction  
These warning lamps come on in  
the event of a malfunction.  
Contact a dealer or a qualified workshop to have  
the system checked.  
The system never suggests:  
– engaging first gear,  
– engaging reverse.  
Gear shift indicator  
(Depending on engine.)