Driving -> DS ConnectedCAM for Your DS 7 Crossback 4 Door First Generation (2017-2022)

117  
Driving  
06  
vehicle and conform to the values written on  
the tyre pressure label.  
Check the pressures of the four tyres before  
performing the reinitialisation.  
The system does not advise if a pressure is  
incorrect at the time of reinitialisation.  
Operation  
To use all camera functions, you must perform the  
following operations:  
►ꢀ Download the DS ConnectedCAM application  
onto a smartphone.  
►ꢀ Pair the smartphone with the camera  
following the instructions given by the  
application.  
Pairing is necessary at the first connection. After  
this it will be automatic.  
The default pairing code is: “ConnectedCAM”.  
With the vehicle stationary, the system is  
reinitialised via the Driving / Vehicle touch  
screen menu..  
►ꢀ In this menu, select the “Vehicle settings” tab.  
►ꢀ In the page, select the "Under-inflation  
initialisation" function.  
►ꢀ Select "Yes" to confirm.  
The reinitialisation is confirmed by the display of  
a message and an audible signal.  
This camera, installed at the top of the  
windscreen and connected wirelessly, allows you  
to:  
– Take photos and videos on demand and share  
them.  
– Send the vehicle's GPS coordinates to a  
smartphone.  
– Record videos automatically in the event of a  
vehicle impact.  
On/Off  
►ꢀ Press and hold this button to switch  
the camera on/off (confirmed by the  
indicator lamp coming on/going off).  
When the camera is switched on, video recording  
is automatic and permanent.  
Malfunction  
As the use of the DS ConnectedCAM is  
under your control and your responsibility,  
you must comply with the regulations for the  
protection of personal data (images of other  
people, vehicle number plates, protected  
buildings, etc.). Check first that your insurance  
company accepts the footage collected from  
the DS ConnectedCAM as evidence.  
These warning lamps come on in  
the event of a malfunction.  
The status of the function is stored when the  
ignition is switched off.  
A message appears, accompanied by an audible  
signal.  
In this case, the tyre under-inflation monitoring  
function is no longer performed.  
Have the system checked by a dealer or a  
qualified workshop.  
Managing photos and videos  
►ꢀ Press this button briefly to take a  
photo.  
An audible signal confirms that the request has  
been acknowledged.  
►ꢀ Press and hold this button to record a  
video.  
A micro USB socket also allows the data from  
the camera to be saved onto other media such as  
computers, tablets, etc.  
Without exception, any action which the  
driver takes concerning the camera must  
be with the vehicle stationary.  
DS ConnectedCAM  
(Depending on country of sale.)  
118  
Driving  
06  
Thanks to the DS ConnectedCAM application, you  
can then automatically and immediately share  
your photos and videos on social networks or by  
email.  
An audible signal confirms that the request has  
been acknowledged.  
the whole manoeuvre, in particular using the  
mirrors.  
Driving and manoeuvring  
aids - General  
Radar  
recommendations  
The operation of the radar as well as the  
associated functions may be impaired through  
the accumulation of dirt (mud, frost, etc.),  
in certain difficult weather conditions (very  
heavy rain, snow) or if the bumper is damaged.  
If the front bumper is to be repainted, contact  
a dealer or a qualified workshop; certain types  
of paint could interfere with the operation of  
the radar.  
Driving and manoeuvring aids cannot, in  
any circumstances, replace the need for  
vigilance on the part of the driver.  
The driver must comply with the Highway  
Code, must remain in control of the vehicle in  
all circumstances and must be able to retake  
control of it at all times. The driver must adapt  
the speed to climactic conditions, traffic and  
the state of the road.  
It is the driver's responsibility to constantly  
check the traffic, to assess the relative  
distances and speeds of other vehicles and to  
anticipate their movements before indicating  
and changing lane.  
Resetting the system  
Pressing and holding these two buttons  
simultaneously resets the system.  
This action erases all data recorded in the camera  
and reinitialises the camera’s default pairing  
code.  
For safety reasons, the driver must not  
use the DS ConnectedCAM application  
from a smartphone while driving. He or she  
must perform any action requiring sustained  
attention when the vehicle is stationary.  
The systems cannot exceed the limits of the  
laws of physics.  
Driving aids camera  
This camera and its associated functions  
may be impaired or not work if the windscreen  
area in front of the camera is dirty, misty,  
frosty, covered with snow, damaged or masked  
by a sticker.  
In humid and cold weather, demist the  
windscreen regularly.  
Poor visibility (inadequate street lighting,  
heavy rain, thick fog, snowfall), dazzle  
(headlamps of an oncoming vehicle, low sun,  
reflections on a damp road, leaving a tunnel,  
Malfunction  
Driving aids  
You should hold the steering wheel  
with both hands, always use the interior and  
exterior rear view mirrors, always keep the feet  
close to the pedals and take a break every two  
hours.  
When a system fault occurs, the indicator  
lamp in the button flashes.  
Have the system checked by a dealer or a  
qualified workshop.  
Manoeuvring aids  
The driver must always check the  
surroundings of the vehicle before and during