Get Access Guide for DS 7 4 Door First Generation (2017-2026)

27

Access

02

Built-in key

Selective unlocking (driver’s door, boot) is

configured in the Driving/Vehicle touch

screen menu.

Electronic key with remote

control function and

built-in key,

Depending on version, using the remote control

built-in key, you can perform the following

operations:

Complete unlocking

– Activation/Deactivation of the manual child

lock.

►ꢀ Press the unlocking button.

Remote control function

– Activation/Deactivation of the front passenger

airbag.

Selective unlocking

Driver’s door and fuel filler/charging flap

►ꢀ Press the unlocking button.

– Back-up Unlocking/Locking of the doors.

►ꢀ Press it again to unlock the other doors and

the boot.

The charging nozzle can be unplugged on the

second press.

Complete or selective unlocking, and alarm

deactivation (depending on version), is confirmed

by the flashing of the direction indicators.

Depending on version, the door mirrors unfold.

Opening the windows

Depending on version, the remote control can be

used to perform the following remote functions:

– Unlocking/Locking/Deadlocking the vehicle.

– Unlocking - Opening the boot.

Depending on version, holding the

unlocking button pressed for more than 3

seconds opens the windows.

►ꢀ To eject the key or put it back in place, pull and

hold the button.

The windows stop when the button is released.

– Remote operation of lighting.

Once the built-in key is ejected, always

keep it with you to be able to carry out the

corresponding back-up procedures.

– Folding/Unfolding the door mirrors.

– Activating/Deactivating the alarm.

– Locating the vehicle.

Selective unlocking and opening of the

tailgate

– Opening/Closing the windows.

By default, selective unlocking of the tailgate

is deactivated and its motorised operation is

activated.

– Closing the sunroof.

Unlocking the vehicle

– Activating the vehicle’s electronic immobiliser.

►ꢀ Press and hold this button to unlock

the boot and, depending on version, trigger

the motorised opening of the tailgate.

28

Access

02

When selective unlocking of the tailgate is

activated, the doors and the fuel filler flap remain

locked.

Deadlocking

Locating the vehicle

This function helps you to spot your vehicle from a

distance, with the vehicle locked:

– The direction indicators flash for approximately

10 seconds.

Deadlocking renders the interior door

controls inoperative. It also disables the

central locking button.

If selective unlocking of the tailgate is

deactivated, pressing the button unlocks the

whole vehicle.

The horn remains operational.

Never leave anyone inside the vehicle when it

is deadlocked.

– The door mirror spotlamps come on.

– The courtesy lamps come on.

►ꢀ Press this button.

If motorised operation of the tailgate is

deactivated, pressing the button partially

opens the tailgate.

►ꢀ Press the locking button again within 5

seconds to deadlock the vehicle (confirmed by the

temporary lighting of the direction indicators).

Closing the windows and sunroof

To lock the vehicle, it is necessary to close the

tailgate again.

Remote lighting of the lamps

Availability of this function depends on version.

►ꢀ Press this button. The sidelamps,

dipped beam headlamps, number plate

lamps and door mirror spotlamps come on for 30

seconds.

An audible signal sounds before the start of

movement.

Locking the vehicle

Maintaining pressure on the locking

button for more than 3 seconds allows the

windows and, depending on version, the sunroof

to be closed to the desired position.

Pressing again before the end of the timed period

switches off the lamps immediately.

Normal locking

This operation also closes the sunroof blind.

►ꢀ Press the locking button.

The locking, and the activation of the alarm

depending on version, is confirmed by the lighting

of the direction indicators.

Ensure that no person or object could

prevent the correct closing of the

windows and sunroof.

Keyless Entry and Start

Depending on version, the door mirrors fold.

If, on versions with alarm, you want to leave

the windows and/or sunroof partially open, you

must first deactivate the interior volumetric

alarm protection.

An access (door or boot) that is not

properly closed prevents locking of the

vehicle. However, if the vehicle is fitted with an

alarm, it will be activated after 45 seconds.

If the vehicle is unlocked but the doors or boot

are not subsequently opened, the vehicle will

automatically lock itself again after about

30 seconds. If the vehicle is fitted with an

alarm, it will be reactivated automatically.

For more information on the Alarm, refer to the

corresponding section.

29

Access

02

This system allows the unlocking, locking

and starting of the vehicle, while carrying the

electronic key on your person in the recognition

zone A.

Selective unlocking

Locking the vehicle

Driver’s door and fuel/charging flap

►ꢀ Pass your hand behind the driver’s door

handle.

Normal locking

►ꢀ To unlock the vehicle completely, pass your

hand behind the handle of one of the passenger

doors with the electronic key close to the

passenger door, or press the tailgate opening

control with the electronic key close to the rear of

the vehicle.

Unlocking the vehicle

Complete or selective unlocking, and deactivation

of the alarm depending on version, is confirmed

by the flashing of the direction indicators.

Depending on version, the door mirrors unfold.

►ꢀ Press the handle on one of the four doors

(at the markings) or the locking control on the

tailgate.

Selective unlocking of the tailgate

Selective unlocking (driver’s door, boot) is

configured in the Driving/Vehicle touch

screen menu.

It is not possible to lock the vehicle if one of the

electronic keys is left inside the vehicle.

Closing the windows and sunroof

►ꢀ Press the tailgate opening control to unlock

just the boot.

Selective unlocking is deactivated by default.

The doors remain locked.

Maintaining pressure on the door handle or

the tailgate control allows the windows and,

depending on version, the sunroof to be closed to

the desired position.

If selective unlocking of the tailgate is

deactivated, pressing this control also

unlocks the doors.

Complete unlocking

►ꢀ Pass your hand behind the handle of one of the

four doors or press the tailgate opening control.

If the motorised tailgate opening control is

activated, this action triggers its automatic

opening.

This operation also closes the sunroof blind.

Make sure that no item or person could

prevent the correct closing of the

windows and sunroof.

Opening the windows

Pay particular attention to children when

operating windows.

Depending on version, keeping your hand behind

the door handle or maintaining the press on the

tailgate opening control allows the windows to be

opened to the desired position.

The locking, and the activation of the alarm

depending on version, is confirmed by the

temporary lighting of the direction indicators.

30

Access

02

Depending on version, the door mirrors fold.

Entry and Startsystem has been left inside the

vehicle, central locking will not take place.

However, if the vehicle is fitted with an alarm,

it will be activated after 45 seconds.

remote control buttons or start the engine with

the electronic key in the reader.

For safety and theft protection reasons,

never leave the electronic key in the

vehicle, even when you are close to it.

For more information on starting with the

Keyless Entry and Start system, refer to the

corresponding section.

If the vehicle is unlocked but the doors or

boot are not subsequently opened, the

vehicle will automatically lock itself again

after about 30 seconds. If the vehicle is fitted

with an alarm, it will be reactivated

automatically.

Deadlocking

Electrical interference

The electronic key may not work if it

is close to an electronic device (e.g. mobile

telephone (switched on or on standby), laptop

computer, strong magnetic fields). If this

occurs, move the electronic key away from the

electronic device.

Deadlocking renders the interior door

controls inoperative. It also disables the

central locking button.

The horn remains operational.

Never leave anyone inside the vehicle when it

is deadlocked.

The automatic door mirror folding/

unfolding function is configured via the

touch screen’s Driving/Vehicle menu.

Central locking

As a safety measure, never leave the

vehicle, even for a short time, without

taking the Keyless Entry and Start system’s

electronic key with you.

Be aware of the risk of theft of the vehicle if

the key is present in one of the defined areas

while the vehicle is unlocked.

►ꢀ Press the handle on one of the four doors

(at the markings) or the locking control on the

tailgate to lock the vehicle.

To preserve the battery charge in the

electronic key and the vehicle's battery,

the "hands-free" functions are set to

Manual

►ꢀ Press it again within 5 seconds to deadlock

the vehicle (confirmed by the temporary lighting

of the direction indicators).

►ꢀ Press this button to lock/unlock the vehicle

(doors and boot) from inside the passenger

compartment.

hibernation mode after 21 days without use. To

restore these functions, press one of the

If one of the doors or the boot is still open

or if the electronic key for the Keyless

The indicator lamp comes on to confirm the

central locking of the vehicle.

31

Access

02

Central locking does not take place if any

of the doors are open.

Advice

Back-up procedures

Remote control

Lost keys, remote control,

electronic key

Go to a dealer with the vehicle’s registration

certificate and your personal identification

documents.

When locking/deadlocking from the

outside

The remote control is a sensitive, high-

frequency device; avoid handling it in your

pocket, due to the risk of unintentionally

unlocking the vehicle.

When the vehicle is locked or deadlocked from

the outside, the indicator lamp flashes and the

button is deactivated.

Avoid pressing the remote control buttons

while out of range of the vehicle, due to

the risk of rendering the remote control

inoperative. It would then be necessary to

reset it.

►ꢀ After normal locking, pull one of the interior

door controls to unlock the vehicle.

►ꢀ After deadlocking, you must use the remote

control, the "Keyless Entry and Start" system

or the built-in key to unlock the vehicle.

The dealer will be able to retrieve the key code

and the transponder code, enabling a new key to

be ordered.

Complete unlocking/locking of

the vehicle with the key

Use this procedure in the following situations:

– Remote control battery discharged.

– Remote control malfunction.

Anti-theft protection

Do not modify the electronic vehicle

immobiliser, as this might result in

malfunctions.

Automatic (anti-intrusion

security)

The doors and boot lock automatically while

driving (speed above 6 mph (10 km/h)).

To deactivate/reactivate this function (activated

by default):

– Vehicle battery discharged.

Locking the vehicle

– Vehicle in an area subject to strong

electromagnetic interference.

Driving with the doors locked could make

it more difficult for the emergency services

to enter the passenger compartment in an

emergency.

In the first case, change the remote control

battery.

►ꢀ Press the button until an audible signal is

triggered and a confirmation message appears.

In the second case, reinitialise the remote control.

Refer to the corresponding sections.

As a safety precaution, take the electronic key

with you when leaving the vehicle, even for a

short time.

Transporting long or voluminous objects

Press the central locking control to drive

with the boot open and the doors locked.

Otherwise, every time the speed of the vehicle

exceeds 6 mph (10 km/h), the sound of the

locks rebounding will be heard and an alert will

be displayed.

Purchasing a second-hand vehicle

Have the key codes memorised by

a dealer, to ensure that the keys in your

possession are the only ones able to start the

vehicle.

►ꢀ Insert the key in the door lock.

►ꢀ Turn the key towards the front/rear to unlock/

lock the vehicle.

32

Access

02

►ꢀ Turn the key towards the rear again within

Locking

Battery type: CR2032/3 volts.

5 seconds to deadlock the vehicle.

If the vehicle is fitted with an alarm, it will

not be activated when locking with the

key.

If the alarm is activated, the siren sounds

when the door is opened; switch on the ignition

to stop it.

Central locking not functioning

Use these procedures in the following cases:

– Central locking malfunction.

►ꢀ Unclip the cover by inserting a small

screwdriver in the slot and lift the cover.

►ꢀ Remove the flat battery from its housing.

►ꢀ Put the new battery in place, respecting the

polarity. Start by inserting it into the contacts

located in the corner, then clip the cover onto the

unit.

►ꢀ Open the doors.

►ꢀ For the rear doors, check that the child lock is

not on.

– Battery disconnected or discharged.

In the event of a malfunction of the

central locking system, the battery must

be disconnected to ensure that the vehicle is

locked fully.

Refer to the corresponding section.

►ꢀ Remove the black cap, located on the edge of

the door, using the key.

►ꢀ Insert the key into the socket without forcing

it, then turn the latch towards the inside of the

door.

►ꢀ Reinitialise the remote control.

For more information on Reinitialising the remote

control, refer to the corresponding section.

Driver's door

►ꢀ Turn the key towards the rear of the vehicle to

lock it, or towards the front to unlock it.

►ꢀ Remove the key and refit the black cap.

►ꢀ Close the doors and check from the outside

that the vehicle is locked.

Do not throw remote control batteries

away, as they contain metals that are

harmful to the environment. Take them to an

approved disposal point.

Passenger doors

Unlocking

Changing the battery

A message is displayed on the instrument panel

►ꢀ Pull the interior door opening control.

when the battery needs changing.

This equipment contains a button type

battery.

Do not swallow the battery. Risk of chemical

burns!

33

Access

02

Swallowing the battery can cause serious

internal burning in only 2 hours and can be

fatal.

When selective unlocking is activated, the

first press of the remote control unlocking

button permits unlocking of the driver's door

only.

If batteries have been swallowed or inserted

into a part of the body, seek immediate

medical advice.

From inside

Keep new and used batteries out of the reach

of children.

►ꢀ Pull the interior opening control of a door; this

unlocks the vehicle completely.

If the battery compartment does not close

properly, stop using the product and keep it out

of the reach of children.

With selective unlocking activated:

– Opening the driver's door unlocks the

driver's door only (if the vehicle has not already

been completely unlocked).

►ꢀ Insert the mechanical key (incorporated into

the remote control) into the lock to open the

vehicle.

Risk of explosion if the battery is replaced

with an incorrect type!

– Opening one of the passenger doors unlocks

the rest of the vehicle.

►ꢀ Place the electronic key against the back-up

reader on the steering column and hold it there

until the ignition is switched on.

Replace the battery with the same type.

Risk of explosion or leaking of

inflammable liquid or gas!

►ꢀ With an automatic gearbox, while in mode P,

depress the brake pedal.

Boot

Do not use in/store in/place in an environment

where the temperature is extremely high or

where the pressure is extremely low due to

very high altitude.

►ꢀ Switch on the ignition by pressing the "START/

STOP" button.

Opening the tailgate

If the fault persists after reinitialisation, contact

a dealer or a qualified workshop without delay.

Do not try to burn, crush or cut a used battery.

Doors

Reinitialising the remote

control

Following replacement of the battery or in the

event of a fault, it may be necessary to reinitialise

the remote control.

Opening

From outside

►ꢀ With the vehicle unlocked or with the

electronic key in the recognition zone, press the

central tailgate control.

►ꢀ After unlocking the vehicle or with the

"Keyless Entry and Start" system electronic key in

the recognition zone, pull the door handle.

34

Access

02

►ꢀ Raise the tailgate.

Check that there is enough space to allow

for the movement of the motorised

When selective unlocking is activated, the

electronic key must be close to the rear of

the vehicle.

tailgate.

The tailgate is not designed to hold a

bicycle carrier.

►ꢀ Insert a small screwdriver into hole A of the

lock to unlock the boot.

Closing the tailgate

►ꢀ Lower the tailgate using the interior grips.

►ꢀ Release the grips and press down on the

outside of the tailgate to close it.

►ꢀ Move the latch to the left.

Locking after closing

If the fault persists after closing again, the boot

will remain locked.

In the event of a malfunction or if you

experience difficulty opening or closing

the tailgate, have it checked by a dealer or a

qualified workshop without delay, to avoid the

issue deteriorating and prevent any risk of the

tailgate dropping, potentially causing serious

injury.

Never insert a finger in the locking system

of the motorised tailgate - risk of serious

In the event of a fault with the central

locking system, it is essential to

injury!

disconnect the battery to lock the boot and so

ensure complete locking of the vehicle.

Anti-pinch

The motorised tailgate has an obstacle detection

system that automatically interrupts and reverses

its movement by a few degrees, to allow the

obstacle to be cleared.

Motorised tailgate

(Depending on version)

Back-up release

To manually unlock the boot in the event of a

Please note that this anti-pinch system is not

active at the end of the closing travel (around

1 cm from completely closed).

The motorised tailgate must only be operated

with the vehicle stationary.

battery or central locking failure.

Unlocking

To avoid the risk of injury through

pinching or trapping, before and during

operation of the motorised tailgate:

– ensure that there is no-one close to the rear

of the vehicle.

►ꢀ Fold the rear seats to gain access to the lock

from inside the boot.

35

Access

02

– monitor the activity of the rear passengers,

particularly any children.

►ꢀ Two consecutive presses on the control D on

the dashboard.

The tailgate opens, either completely by

default, or to the position memorised

beforehand.

Bicycle carrier/Towing device

The motorised tailgate is not designed to support

a bicycle carrier.

If motorised operation is not activated, these

actions release the tailgate (partially-open

position).

When installing a bicycle carrier on the towing

device with connection of the cable to the trailer

socket, the motorised operation of the tailgate

will be automatically deactivated.

When the vehicle is locked, the request to open

the boot with one of the controls A or B unlocks

the vehicle, or only the boot if selective

unlocking is activated, prior to the opening of

the boot.

If using a towing device or bicycle carrier

not recommended by the Manufacturer, it

is essential to deactivate the motorised

operation of the tailgate.

There are several ways of operating the tailgate:

A. Using the Keyless Entry and Start system’s

electronic key

It is possible to interrupt the operation of

the tailgate at any point.

B. Using the exterior tailgate control

C. Using the interior tailgate control*

D. Using the control on the dashboard*

Pressing one of these controls again interrupts

the movement that is underway.

Motorised operation

Motorised operation of the tailgate is set

Following the interruption of a movement,

pressing one of these controls again reverses

the movement.

via the Driving/Vehicle touch screen menu.

Opening/Closing

►ꢀ A long press on the central button A of the

electronic key.

or

Memorising an opening

position

►ꢀ A short press on the exterior tailgate control B,

with the electronic key on your person.

or

To memorise a position, in order to limit the

►ꢀ A short press on the interior tailgate control C

(closing only).

or

motorised tailgate opening angle:

►ꢀ move the tailgate to the desired position

manually or by pressing the button.

* Depending on version.

36

Access

02

►ꢀ press button C or the exterior control B for

more than 3 seconds (memorisation is confirmed

by a brief audible signal).

Manual closing of the

motorised tailgate in case of

failure

Hands-free function

(Hands-Free Tailgate

Access)

Memorising is not available until the

height of opening is more than or equal to

1 metre between the low position and the high

position of the tailgate.

This operation is only necessary in the case of

(Depending on version)

failure of the tailgate motor.

With the electronic key on your person, this

function allows the motorised tailgate to be

opened, closed or stopped via a "kicking"

movement under the rear bumper.

The "Hands-Free Tailgate/Access" function

is set via the Driving/Vehicle touch screen

menu.

If the failure originates from the battery, it is

recommended to recharge it or change it with the

tailgate closed.

To delete the memorised position:

►ꢀ open the tailgate to any position.

►ꢀ press button C or the exterior control B for

more than 3 seconds (deletion is confirmed by a

long audible signal).

In this situation, a significant force may be

needed to close the tailgate.

►ꢀ Close it gently without slamming, as slowly as

possible, by pushing at the centre of the tailgate.

Ensure that you are steady on your feet

before performing the "kicking"

movement.

Do not lower the tailgate by pushing at

one of its sides - risk of damage!

Manual operation

The tailgate can be manoeuvred by hand, even

with motorised operation activated.

The tailgate must be stationary.

Take care not to touch the exhaust system

which may be hot - risk of burns!

Precautions in use

When opening and closing the motorised tailgate

manually, there is no assistance from gas struts.

Resistance to opening and closing is therefore

entirely normal.

In wintry conditions

Rechargeable hybrid vehicles

The function is not available when the

vehicle is connected.

To avoid any operating problems, remove

the snow or wait until the ice melts before

requesting motorised opening of the tailgate.

Repeatedly opening and closing the

motorised tailgate can cause overheating

of its electric motor, after which opening and

closing will not be possible.

When washing

When washing the vehicle in an automatic

car wash, do not forget to lock and move

away from the vehicle to prevent any risk of

unwanted opening.

Allow at least 10 minutes for the electric motor

to cool down before operating the tailgate

again.

If you are unable to wait, operate it manually.

37

Access

02

"Sideward kicking" movements do not

work. If the "kicking" movement has not

been detected, wait at least 2 seconds before

repeating the movement.

The green indicator lamp comes on to indicate

that the function is activated.

Recommendations on the

hands-free function (Hands-

Free Tailgate Access)

If it does not work, check that the electronic key

is not exposed to a source of electromagnetic

interference (e.g. smartphone).

Do not perform repetitive "kicking"

movements.

If the motorised tailgate has not started to open,

check that:

– the function is activated.

– the electronic key is on your person, outside the

vehicle in the rear recognition area.

– the "kicking" movement was performed in the

detection zone, close enough to the bumper.

– the foot was removed from the bumper quickly

enough.

The function may be deactivated or affected if

there is rain or snow.

The function may not work correctly with a

prosthetic leg.

In some circumstances, the tailgate may open or

close by itself, particularly when:

– hitching up or removing a trailer;

– fitting or removing a bicycle carrier;

– loading or unloading bicycles on/from a bicycle

carrier;

Automatic locking with the hands-free

function

►ꢀ Position yourself behind the vehicle by the

number plate and perform a "kicking" movement

in the "OK" detection zone.

– depositing or lifting something behind the

vehicle;

– an animal approaches the rear bumper;

– washing the vehicle;

The detection zone is not centred with

respect to the number plate.

– maintenance is performed on the vehicle;

– accessing the spare wheel.

The "kicking" movement must be given forwards,

smoothly, not too fast and with a vertical

movement from low to high. Raise the foot

sufficiently and remove it immediately.

Recognition of the "kicking" movement is

confirmed by the lighting of the direction

indicators followed by an audible signal.

To avoid such operating problems, keep the

electronic key away from the recognition zone or

deactivate the hands-free function.

Towing device

►ꢀ To activate/deactivate the automatic locking

of the vehicle when closing the tailgate with the

hands-free function, press this button.

The installation of a towing device may

disturb the detection system.

38

Access

02

To avoid unintentionally opening the tailgate

The alarm is triggered if anyone breaks a window,

enters the passenger compartment or moves

inside the vehicle.

second and the direction indicators come on for

about 2 seconds.

while operating the towing device:

►ꢀ remove the electronic key from the

recognition zone, with the tailgate closed.

For more information on the Towing device

with quickly detachable towball, refer to the

corresponding section.

The exterior perimeter monitoring is activated

after 5 seconds and the interior volumetric and

anti-tilt monitoring after 45 seconds.

Anti-tilt monitoring

The system checks for any change in the attitude

of the vehicle.

If an opening (door, boot or bonnet) is not

properly closed, the vehicle is not locked,

but the exterior perimeter monitoring will be

activated after 45 seconds, at the same time

as the interior volumetric and anti-tilt

monitoring.

The alarm goes off if the vehicle is lifted or moved.

When the vehicle is parked, the alarm will

not be triggered if the vehicle is knocked.

Alarm

(Depending on version)

Self-protection function

The system checks whether any of its

components are out of service.

Deactivation

►ꢀ Press one of the remote control unlocking

buttons:

The alarm is triggered if the battery, the central

control or the siren wiring is put out of service or

damaged.

short press

Work on the alarm system

long press

Contact a dealer or a qualified workshop.

or

System which protects and provides a deterrent

against theft and break-ins.

►ꢀ Unlock the vehicle with the Keyless Entry and

Start system.

Locking the vehicle with full

alarm system

Exterior perimeter monitoring

The monitoring system is deactivated: the

indicator lamp in the button goes off and the

direction indicators flash for about 2 seconds.

The system checks for opening of the vehicle.

The alarm is triggered if anyone tries to open a

door, the boot or the bonnet, for example.

Activation

►ꢀ Switch off the ignition and exit the vehicle.

►ꢀ Lock or deadlock the vehicle using the remote

control or with the Keyless Entry and Start

system.

If the vehicle automatically locks itself

again (as happens if a door or the boot is

not opened within 30 seconds of unlocking),

the monitoring system is automatically

reactivated.

Interior volumetric monitoring

The system checks for any variation in volume in

the passenger compartment.

When the monitoring system is active, the red

indicator lamp in the button flashes once per

39

Access

02

Reactivating the interior volumetric and

anti-tilt monitoring

►ꢀ Switch on the ignition; this stops the alarm.

The indicator lamp in the button goes off.

Locking the vehicle with

exterior perimeter monitoring

only

Deactivate the interior volumetric monitoring to

avoid the unwanted triggering of the alarm, in

certain cases such as:

►ꢀ Deactivate the exterior perimeter monitoring

by unlocking the vehicle using the remote control

or the Keyless Entry and Start system.

The indicator lamp in the button goes off.

►ꢀ Reactivate all monitoring by locking the

vehicle using the remote control or the Keyless

Entry and Start system.

Locking the vehicle without

activating the alarm

►ꢀ Lock or deadlock the vehicle using the key

(built-in the remote control) in the driver's door

lock.

– Slightly open window.

– Washing the vehicle.

– Changing a wheel.

The red indicator lamp in the button once again

flashes every second.

Automatic activation

(Depending on version)

– Towing the vehicle.

– Transport on a ship or ferry.

The system is activated automatically 2 minutes

after the last door or the boot is closed.

►ꢀ To avoid triggering the alarm on entering the

vehicle, first press the unlocking button on the

remote control or unlock the vehicle using the

"Keyless Entry and Start" system.

Triggering of the alarm

This is indicated by sounding of the siren and

flashing of the direction indicators for 30

seconds.

Deactivating the interior volumetric and

anti-tilt monitoring

►ꢀ Switch off the ignition and within 10 seconds

press the alarm button until its red indicator lamp

is on fixed.

Depending on the country of sale, certain

monitoring functions remain active until

the alarm has been triggered eleven times

consecutively.

►ꢀ Get out of the vehicle.

Malfunction

►ꢀ Immediately lock the vehicle using the remote

control or the Keyless Entry and Start system.

Only the exterior perimeter monitoring is

activated; the button's red indicator lamp flashes

once every second.

When the ignition is switched on, the fixed

lighting of the red indicator lamp in the button

indicates a system malfunction.

Have it checked by a dealer or a qualified

workshop.

When the vehicle is unlocked using the remote

control or the Keyless Entry and Start system,

rapid flashing of the red indicator lamp in the

button informs you that the alarm was triggered

during your absence. When the ignition is

switched on, this flashing stops.

To take effect, this deactivation must be

carried out after each time the ignition is

switched off.

Failure of the remote control

To deactivate the monitoring functions:

►ꢀ Unlock the vehicle using the key in the driver's

door lock.

►ꢀ Open the door; the alarm is triggered.

40

Access

02

For versions fitted with an electric child

lock, this control also deactivates the

interior rear door controls.

Automatic operation

Electric windows

►ꢀ To open/close the window, press/pull the

switch past its resistance point: the window

opens/closes completely when the switch is

released.

For more information on the Child lock, refer to

the corresponding section.

Operating the switch again stops the movement

of the window.

Reinitialising the electric

windows

After reconnecting the battery, or in the event

of abnormal window movement, the anti-pinch

function must be reinitialised.

Window controls remain operational for

approximately 45 seconds after switching

off the ignition or after locking the vehicle.

After that time, the controls are disabled.

To reactivate them, switch on the ignition or

unlock the vehicle.

The anti-pinch function is disabled during the

following sequence of operations.

For each window:

1. Left-hand front

2. Right-hand front

Anti-pinch

3. Left-hand rear

►ꢀ Lower the window fully, then raise it; it will

rise in steps of a few centimetres each time the

control is pressed. Repeat the operation until the

window is fully closed.

4. Right-hand rear

If the window meets an obstacle while rising, it

stops and immediately partially lowers again.

5. Deactivation of electric window controls

located by rear seats

Deactivation of the rear door opening controls

(electric child lock)*

Deactivating the rear controls

for the rear electric windows

For your children's safety, press control 5

to deactivate the rear electric window

controls.

►ꢀ Continue to pull the control for at least one

second after the window reaches the closed

position.

Manual operation

If an electric window meets an obstacle

during operation, the movement of the

window must be reversed. To do this, press the

relevant control.

►ꢀ To open/close the window, press/pull the

switch without passing the point of resistance;

the window stops as soon as the switch is

released.

The indicator lamp for the button comes on,

accompanied by a message confirming activation.

With the ignition on, it remains on as long as the

child lock remains activated.

When the driver operates the passengers’

electric window controls, it is important to

ensure that nothing can prevent the window

from closing properly.

The rear electric windows can still be controlled

using the driver's controls.

* Depending on version.

41

Access

02

It is important to ensure that passengers use

the electric windows correctly.

If the sunroof is wet, following a rain

shower or washing the vehicle, wait until

it is completely dry before operating it.

Do not operate the sunroof if it is covered by

snow or ice - risk of damage!

Pay particular attention to children when

operating the windows.

Be aware of passengers and/or other persons

present when closing windows remotely using

the electronic key.

Use only plastic scrapers to remove snow or

ice from the sunroof.

Do not put your head or arms through the open

windows when the vehicle is moving - risk of

serious injury!

Regularly check the condition of the

sunroof seals (e.g. presence of dust, dead

leaves).

If using a car wash, check first that the roof is

correctly closed and keep the high-pressure jet

at least 30 centimetres from the seals.

Panoramic sunroof

The panoramic sunroof consists of a movable

glass panel that slides over the roof and a blind

that can be opened independently. Opening the

sunroof automatically opens the blind.

A. Sunroof control

B. Sunroof blind control

Never leave the vehicle with the sunroof

open.

The sunroof or blind can be operated when the

ignition is turned on (if the battery is charged

enough), with the engine running, in STOP mode

of Stop & Start, and up to 45 seconds after turning

off the ignition or after locking the vehicle.

►ꢀ To operate the panoramic sunroof or the blind,

use the buttons in the roof console.

Operation

When opening the sunroof fully, the movable

glass moves to a partially open position, then

slides over the roof. Any intermediate position is

possible.

Precautions

Do not put your head or arms through the

sunroof while the vehicle is moving - risk

of serious injury!

Depending on the speed of the vehicle, the

partially open position may vary to

improve the acoustics.

Ensure that any luggage or accessories

carried on the roof bars do not interfere

with the movement of the sunroof.

Do not place heavy loads on the movable glass

panel of the sunroof.

42

Access

02

Before operating the sunroof or blind

control buttons, ensure that no object or

►ꢀ When holding a button (without going

beyond the point of resistance), the movement

of the sunroof or blind stops when this button is

released.

►ꢀ Press and hold the front part of button A, until

the sunroof and blind move slightly, then hold for

a further 1 second before releasing.

person might prevent the movement.

Be particularly aware of children when

operating the sunroof or blind.

►ꢀ Wait 2 seconds and then press and hold the

front part of button A. The blind and the sunroof

will open and close, one after the other. When

both are completely closed again, hold for a

further 2 seconds and release.

►ꢀ When the sunroof is closed: pressing once

without passing the point of resistance moves it

to a partially open position.

If something is trapped when operating

the sunroof or blind, you should reverse the

movement of the sunroof or blind by pressing

the control in question.

►ꢀ When the sunroof is partially open: pressing

once without passing the point of resistance

opens or closes it fully.

If there is an operating fault, restart the

whole procedure.

The driver must ensure that passengers use

the sunroof and blind correctly.

The sunroof and windows, then the blind,

can be closed by holding down the door

locking control. The manoeuvre stops as soon

as the locking control is released.

Anti-pinch system

If the sunroof or blind encounters an obstacle

when closing, the movement is automatically

reversed.

Closing of the blind is limited by the

position of the sunroof: the blind cannot

go further than the front of the movable glass.

During simultaneous movements of the

sunroof and blind, the blind automatically

stops or resumes movement depending on the

position of the sunroof.

The roof anti-pinch system is designed to be

effective at speeds of up to 75 mph (120 km/h).

Opening/Closing

►ꢀ To open the sunroof or the blind, use the part

of the button located towards the rear of the

vehicle.

►ꢀ To close the sunroof or the blind, use the part

of the button located towards the front of the

vehicle.

Reinitialisation

Following reconnection of the battery or in the

event of a fault or jerky movement of the sunroof

or blind, reinitialisation is required.

Operation of buttons

►ꢀ Pressing a button beyond its point of

resistance directly opens or closes the sunroof or

blind fully.

►ꢀ Check that nothing is interfering with the

sunroof or blind and that the seals are clean.

►ꢀ With the ignition on, fully close the sunroof

and blind.

►ꢀ Pressing the button again stops the current

movement.

Access for Your DS 7 4 Door First Generation (2017-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals