2017-2026 DS 7 4 Door Access -> Alarm User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Access -> Alarm for Your DS 7 4 Door First Generation (2017-2026)

38  
Access  
02  
To avoid unintentionally opening the tailgate  
The alarm is triggered if anyone breaks a window,  
enters the passenger compartment or moves  
inside the vehicle.  
second and the direction indicators come on for  
about 2 seconds.  
while operating the towing device:  
►ꢀ remove the electronic key from the  
recognition zone, with the tailgate closed.  
For more information on the Towing device  
with quickly detachable towball, refer to the  
corresponding section.  
The exterior perimeter monitoring is activated  
after 5 seconds and the interior volumetric and  
anti-tilt monitoring after 45 seconds.  
Anti-tilt monitoring  
The system checks for any change in the attitude  
of the vehicle.  
If an opening (door, boot or bonnet) is not  
properly closed, the vehicle is not locked,  
but the exterior perimeter monitoring will be  
activated after 45 seconds, at the same time  
as the interior volumetric and anti-tilt  
monitoring.  
The alarm goes off if the vehicle is lifted or moved.  
When the vehicle is parked, the alarm will  
not be triggered if the vehicle is knocked.  
Alarm  
(Depending on version)  
Self-protection function  
The system checks whether any of its  
components are out of service.  
Deactivation  
►ꢀ Press one of the remote control unlocking  
buttons:  
The alarm is triggered if the battery, the central  
control or the siren wiring is put out of service or  
damaged.  
short press  
Work on the alarm system  
long press  
Contact a dealer or a qualified workshop.  
or  
System which protects and provides a deterrent  
against theft and break-ins.  
►ꢀ Unlock the vehicle with the Keyless Entry and  
Start system.  
Locking the vehicle with full  
alarm system  
Exterior perimeter monitoring  
The monitoring system is deactivated: the  
indicator lamp in the button goes off and the  
direction indicators flash for about 2 seconds.  
The system checks for opening of the vehicle.  
The alarm is triggered if anyone tries to open a  
door, the boot or the bonnet, for example.  
Activation  
►ꢀ Switch off the ignition and exit the vehicle.  
►ꢀ Lock or deadlock the vehicle using the remote  
control or with the Keyless Entry and Start  
system.  
If the vehicle automatically locks itself  
again (as happens if a door or the boot is  
not opened within 30 seconds of unlocking),  
the monitoring system is automatically  
reactivated.  
Interior volumetric monitoring  
The system checks for any variation in volume in  
the passenger compartment.  
When the monitoring system is active, the red  
indicator lamp in the button flashes once per  
39  
Access  
02  
Reactivating the interior volumetric and  
anti-tilt monitoring  
►ꢀ Switch on the ignition; this stops the alarm.  
The indicator lamp in the button goes off.  
Locking the vehicle with  
exterior perimeter monitoring  
only  
Deactivate the interior volumetric monitoring to  
avoid the unwanted triggering of the alarm, in  
certain cases such as:  
►ꢀ Deactivate the exterior perimeter monitoring  
by unlocking the vehicle using the remote control  
or the Keyless Entry and Start system.  
The indicator lamp in the button goes off.  
►ꢀ Reactivate all monitoring by locking the  
vehicle using the remote control or the Keyless  
Entry and Start system.  
Locking the vehicle without  
activating the alarm  
►ꢀ Lock or deadlock the vehicle using the key  
(built-in the remote control) in the driver's door  
lock.  
– Slightly open window.  
– Washing the vehicle.  
– Changing a wheel.  
The red indicator lamp in the button once again  
flashes every second.  
Automatic activation  
(Depending on version)  
– Towing the vehicle.  
– Transport on a ship or ferry.  
The system is activated automatically 2 minutes  
after the last door or the boot is closed.  
►ꢀ To avoid triggering the alarm on entering the  
vehicle, first press the unlocking button on the  
remote control or unlock the vehicle using the  
"Keyless Entry and Start" system.  
Triggering of the alarm  
This is indicated by sounding of the siren and  
flashing of the direction indicators for 30  
seconds.  
Deactivating the interior volumetric and  
anti-tilt monitoring  
►ꢀ Switch off the ignition and within 10 seconds  
press the alarm button until its red indicator lamp  
is on fixed.  
Depending on the country of sale, certain  
monitoring functions remain active until  
the alarm has been triggered eleven times  
consecutively.  
►ꢀ Get out of the vehicle.  
Malfunction  
►ꢀ Immediately lock the vehicle using the remote  
control or the Keyless Entry and Start system.  
Only the exterior perimeter monitoring is  
activated; the button's red indicator lamp flashes  
once every second.  
When the ignition is switched on, the fixed  
lighting of the red indicator lamp in the button  
indicates a system malfunction.  
Have it checked by a dealer or a qualified  
workshop.  
When the vehicle is unlocked using the remote  
control or the Keyless Entry and Start system,  
rapid flashing of the red indicator lamp in the  
button informs you that the alarm was triggered  
during your absence. When the ignition is  
switched on, this flashing stops.  
To take effect, this deactivation must be  
carried out after each time the ignition is  
switched off.  
Failure of the remote control  
To deactivate the monitoring functions:  
►ꢀ Unlock the vehicle using the key in the driver's  
door lock.  
►ꢀ Open the door; the alarm is triggered.  

Related Topics

Popular Owner Manuals