156
07
Practical information
appropriate for the temperature conditions
must be used in order to protect the system's
components (pump, tank, ducts, jets).
For more information on the precautions
to take before any work on the 12 V
Engine coolant
It is normal to top up this fluid between
battery, refer to the corresponding section.
two services.
The check and top-up must only be done with the
engine cold.
Filling with pure water is prohibited in all
circumstances (risk of freezing, limescale,
etc.).
Versions equipped with Stop & Start are
fitted with a 12 V lead-acid battery with
special technology and specifications.
Its replacement should be carried out only by a
dealer or a qualified workshop.
A level of coolant that is too low risks causing
major damage to the engine; the coolant level
must be close to the "MAX" mark without ever
going above it.
Checks
If the level is close to or below the "MIN" mark, it
is essential to top it up.
Unless otherwise indicated, check these
components in accordance with the
manufacturer's service schedule and according to
your engine.
Air filter
When the engine is hot, the temperature of the
coolant is regulated by the fan.
Depending on the environment and the use
of the vehicle (e.g. dusty atmosphere, city
As the cooling system is pressurised, wait at least
one hour after switching off the engine before
carrying out any work.
driving), change it twice as often, if necessary.
Otherwise, have them checked by a dealer or a
qualified workshop.
Passenger compartment filter
In order to avoid the risk of scalding if you need to
top up in an emergency, wrap a cloth around the
cap and unscrew the cap by two turns to allow the
pressure to drop.
Only use products recommended by the
Manufacturer or products of equivalent
quality and specification.
Depending on the environment and the use
of the vehicle (e.g. dusty atmosphere, city
driving), change it twice as often, if necessary.
In order to optimise the operation of
components as important as those in the
braking system, the Manufacturer selects and
offers very specific products.
Once the pressure has dropped, remove the cap
and top up to the required level.
A clogged passenger compartment filter
can adversely affect air conditioning
system performance and generate undesirable
odours.
Screenwash fluid
Top up to the required level when
12 V battery
necessary.
Oil filter
The battery does not require any
Fluid specification
maintenance.
Change the oil filter each time the engine
Check regularly that the terminals are correctly
tightened (versions without quick-release
terminals) and that the connections are clean.
oil is changed.
The fluid must be topped up with a pre-mixed
product.
In winter (temperatures below zero), a fluid
containing an anti-freeze agent which is
English 
