2020-2024 DS 9 4 Door Practical information -> Advice on care and maintenance User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Practical information -> Advice on care and maintenance for Your DS 9 4 Door First Generation (2020-2024)

158  
07  
Practical information  
Reverting to normal operation  
"hands-free" function (Hands-Free Tailgate  
Access).  
Free-wheeling  
►ꢀ While depressing the brake pedal, restart the  
engine.  
In certain situations, it is necessary to put the  
vehicle into free-wheeling mode (e.g. towing, on  
a rolling road, automatic car wash (Wash mode),  
rail or sea transport).  
When using a pressure washer, keep the jet  
nozzle at a minimum distance of 30 cm from  
the vehicle (particularly when cleaning areas  
containing chipped paint, sensors or seals).  
Promptly clean up any stains containing  
chemicals liable to damage the vehicle's  
paintwork (including tree resin, bird droppings,  
insect secretions, pollen and tar).  
Keyless Entry and Start  
You must not depress the brake pedal  
while switching the ignition on again, then  
switching it off. If you do, the engine will start,  
requiring you to restart the procedure.  
The procedure varies according to the type of  
gearbox and parking brake.  
With EAT8 automatic gearbox  
and electric parking brake  
Depending on the environment, clean the  
vehicle frequently to remove salty deposits  
(in coastal areas), soot (in industrial areas)  
and mud/salts (in wet or cold areas). These  
substances can be highly corrosive.  
Contact a dealer or a qualified workshop for  
advice on removing stubborn stains requiring  
special products (such as tar or insect  
removers).  
Advice on care and  
maintenance  
/
Release procedure  
General recommendations  
Observe the following recommendations to avoid  
►ꢀ With the vehicle stationary and the engine  
running, select mode N and switch off the  
ignition.  
damaging the vehicle.  
Within 5 seconds:  
Exterior  
►ꢀ Switch on the ignition again.  
►ꢀ While depressing the brake pedal, move the  
push selector forwards or backwards to confirm  
mode N.  
Preferably, have paint touch-ups performed by  
a dealer or a qualified workshop.  
Never use a high-pressure jet wash in the  
engine compartment - risk of damaging  
the electrical components!  
Interior  
►ꢀ While depressing the brake pedal, press the  
control lever to release the parking brake.  
►ꢀ Release the brake pedal, switch off the  
ignition.  
Do not wash the vehicle in bright sunshine or  
extremely cold conditions.  
When washing the vehicle, never use a  
water hose or high-pressure jet to clean  
the interior.  
When washing the vehicle in an automatic  
roller-brush car wash, be sure to lock the  
doors and, depending on version, move the  
electronic key away and deactivate the  
Liquids carried in cups or other open  
containers can spill, presenting a risk of  
damage to the instruments and controls and  
the controls located on the centre console. Be  
vigilant!  
If the 5-second time limit is exceeded, the gearbox  
engages mode P; it is then necessary to restart  
the procedure.  
159  
07  
Practical information  
To clean instrument panels, touch screens  
or other displays, wipe gently with a soft,  
dry cloth. Do not use products (e.g. alcohol,  
disinfectant) or soapy water directly on these  
surfaces - risk of damage!  
Use a high-flow hose (temperature  
between 25°C and 40°C).  
Place the jet of water perpendicular to the  
surface to be cleaned.  
Rinse the vehicle with demineralised water.  
Bodywork  
High-gloss paint  
Leather  
Leather is a natural product. Appropriate regular  
care is essential for its durability.  
It must be protected and nourished using a  
specific leather product, to keep it supple and  
preserve its original appearance.  
Do not use abrasive products, solvents,  
petrol or oil to clean the bodywork.  
Never use an abrasive sponge to clean  
stubborn stains - risk of scratching the  
paintwork!  
Do not clean leather using unsuitable  
cleaning agents such as solvents,  
Do not apply polish in strong sunshine, or to  
plastic or rubber parts.  
detergents, petrol or pure alcohol.  
When cleaning items partly made from leather,  
take care not to damage the other materials  
with the specific leather product.  
Use a soft cloth and soapy water or a pH  
neutral product.  
Gently wipe the bodywork with a clean  
microfibre cloth.  
Before cleaning greasy stains or liquids,  
quickly mop up any surplus.  
Apply polish with the vehicle clean and dry.  
Comply with the instructions for use stated on  
the product.  
Before cleaning, wipe off any residues liable  
to scuff the leather, using a cloth that has  
been dampened with demineralised water and  
thoroughly wrung out.  
Decals  
Clean leather using a soft cloth moistened  
with soapy water or a pH-neutral product.  
Dry with a soft, dry cloth.  
(Depending on version)  
Do not use a high-pressure washer to  
clean the vehicle - risk of damaging or  
detaching the decals!  

Related Topics

Popular Owner Manuals