START/STOP button without depressing
the clutch or brake pedal.
Some indicator lights/warning lights
should be inspected before the engine
is started.
IGNITION SWITCH
Push Button Start
Positions
Do not leave the ignition in the ON
position while the engine is not
When the keyless ignition has been
placed in the ON position, the sound of
the fuel pump motor operating near the
fuel tank can be heard. This does not
indicate a problem.
The system operates only when the key
fob is within operational range.
running. The battery could discharged.
If the ignition is left in ACC position (for
automatic transmission, the gear
selector is in the P position, and the
ignition is in ACC), the ignition cycles to
the OFF position automatically after
about 25 minutes.
When the clutch pedal (manual
transmission) or brake pedal (automatic
transmission) are not depressed and the
keyless ignition START/STOP button is
pushed, the ignition cycles in the order of
OFF, ACC, and ON. Pushing the
START/STOP button again from ON
position cycles the ignition to the OFF
position.
Warning!
OFF
Never use the PARK position as a
substitute for the parking brake. Always
apply the parking brake fully when exiting
the vehicle to guard against vehicle
The power supply to electrical devices
turns off, and the keyless ignition start
indicator light (amber) also turns off. In
the OFF position, the steering wheel is
locked.
movement and possible injury or damage.
When exiting the vehicle, always make
sure the ignition is in the OFF mode,
remove the key fob from the vehicle, and
lock your vehicle.
ACC (Accessory)
Some electrical accessories will operate
and the indicator light (amber)
illuminates. In the ACC position, the
steering wheel is unlocked.
Never leave children alone in a vehicle,
or with access to an unlocked vehicle.
Allowing children to be in a vehicle
unattended is dangerous for a number of
reasons. A child or others could be
seriously or fatally injured. Children should
be warned not to touch the parking brake,
brake pedal or the transmission gear
selector.
The Keyless Entry System does not
function while the keyless ignition has
been placed in the ACC position, and
the doors will not lock/unlock even if
they have been locked manually.
05010101-L12-001AB
Keyless START/STOP Ignition
Button
ON
Note:
This is the normal running position after
the engine is started.
Do not leave the key fob in or near the
vehicle, (or in a location accessible to
children), and do not leave the ignition in
the ACC or ON/RUN mode. A child could
operate power windows, other controls, or
move the vehicle.
The engine starts by pushing the
keyless ignition START/STOP button
while depressing the clutch pedal
(manual transmission) or the brake pedal
(automatic transmission). To change the
ignition position, push the keyless ignition
Note: The indicator light (amber) turns
off (the indicator light amber illuminates
when the ignition has been placed in
the ON position and the engine is not
running).
20
English 
