Function Number
Function (*)
1
The auto door-lock function is disabled.
The doors and the fuel filler door lock automatically when the vehicle speed is about 12 MPH
(20 km/h) or more.
2
3
The doors and the fuel filler door lock automatically when the vehicle speed is about 12 MPH
(20 km/h) or more. The doors, trunk lid, and fuel filler door unlock when the ignition is cycled from
the ON to OFF position.
Automatic Transmission Vehicles Only: when the ignition is placed in the ON position, and the
gear selector is shifted from park (P) to any other gear position, the doors,and fuel filler door lock
automatically.
4
5
Automatic Transmission Vehicles Only: when the ignition is placed in the ON position, and the
gear selector is shifted from PARK (P) to any other gear position, the doors and the fuel filler door
lock automatically. When the dear selector is shifted to PARK (P) while the ignition is placed in the
ON position, the doors and the fuel filler door unlock automatically.
Automatic Transmission Vehicles Only: the doors and the fuel filler door lock automatically
when the vehicle speed is about 12 MPH (20 km/h) or more. When the gear selector is shifted to
PARK (P) while the ignition is placed in the ON position, the doors and the fuel filler door unlock
automatically.
6
(*) For other settings for the auto door
lock function contact an authorized
dealer.
3. Push and hold the lock side of the
driver's door-lock switch within
20 seconds of placing the ignition in the
ON position, and make sure a beep is
heard about eight seconds afterwards.
5. Three seconds after the function
setting has been changed, a beep
sound will beep in the amount of the
selected function number (example:
Function number 3 = three beep
sounds).
Note: Function number three is the
factory setting for your vehicle.
Settings Changing
4. Refer to the auto lock/unlock
function setting table. Determine the
function number for the desired setting.
Push the unlock side of the driver's
door-lock switch the same number of
times as the selected function number
(example: if you select function 2, push
the unlock side of the switch only two
times).
Settings can be changed using the
following procedure:
1. Safely park the vehicle. Both doors
must remain closed.
2. Place the ignition in the ON position.
31
English 
