Seat Recline
Heated Seats
Use the seat warmer when the
engine is running. Leaving the seat
warmer on for long periods with the
engine not running could discharge the
battery.
To recline the seatback, lift up the
recline lever and lean back until the
desired position has been reached,
then release the lever. Make sure the
lever returns to its original position and
the seatback is locked in place by
attempting to push it forward and
rearward.
On some models, the front driver and
passenger seats may be equipped with
heaters in both the seat cushions and
seatbacks. The controls for the front
heated seats are located on the center
instrument panel below the climate
controls.
The temperature of the seat warmer
cannot be adjusted beyond High,
Medium and Low.
The heated seats have three settings:
High, Medium, and Low. Push the
switch once to turn the heated seats on
High, twice for Medium, and three times
for Low. Pushing the switch a fourth
time will turn the heated seat off.
Once a heat setting is selected,
heat will be felt within two to five
minutes.
Warning!
Adjusting a seat while driving may be
dangerous. Moving a seat while driving
could result in loss of control which could
cause a collision and serious injury or
death.
Note:
If the ignition is cycled OFF while
the seat warmer is operating (High,
Mid or Low), and then cycled ON
again, the seat warmer will
automatically operate at the
temperature set before the ignition
was cycled OFF.
Seats should be adjusted before
fastening the seat belts and while the
vehicle is parked. Serious injury or death
could result from a poorly adjusted seat
belt.
03010203-L12-002
Do not ride with the seatback reclined
so that the shoulder belt is no longer
resting against your chest. In a collision
you could slide under the seat belt, which
could result in serious injury or death.
Heated Seat Switches
33
English 
