Advertisement

Advertisement

Getting To Know Your Vehicle -> Environment Protection Systems for Your Fiat 124 Spider 2 Door Second Generation (2016-2020)

The ignition must be placed in ACC or  
ON.  
Depending on the device connected  
to the accessory socket, the vehicle's  
electrical system may be affected,  
which could cause the warning light to  
illuminate. Disconnect the connected  
device and make sure that the problem  
is resolved. If the problem is resolved,  
disconnect the device from the socket  
and switch the ignition off. If the  
Cupholders — If  
Equipped  
To prevent accessory socket damage  
or electrical failure, pay attention to the  
following:  
Cupholders are available and can be  
inserted in the center console on the  
passenger side and the rear area of the  
center console.  
Do not use accessories that require  
more than 12V (120 W, 10A).  
Do not use accessories that are not  
genuine FCA accessories or the  
equivalent.  
problem is not resolved, contact an  
authorized dealer.  
Note: To prevent discharging of the  
battery, do not use the socket for long  
periods with the engine off or idling.  
Close the cover when the accessory  
socket is not in use to prevent foreign  
objects and liquids from getting into the  
accessory socket.  
Warning!  
Correctly insert the plug into the  
accessory socket.  
06040500L21002  
Cupholders  
To avoid serious injury or death:  
Only devices designed for use in this  
type of outlet should be inserted into any  
12 Volt outlet.  
Do not insert the cigarette lighter into  
the accessory socket.  
1 — Front Cup Holder  
2 — Rear Cup Holder (If Equipped)  
Noise may occur on the audio  
playback depending on the device  
connected to the accessory socket.  
Do not touch with wet hands.  
Close the lid when not in use and while  
driving the vehicle.  
Warning!  
If this outlet is mishandled, it may cause  
an electric shock and failure.  
Never use a cup holder to hold hot liquids  
while the vehicle is moving. Using a cup  
holder to hold hot liquids while the vehicle  
is moving is dangerous. If the contents  
spill, you could be burned.  
72  
Installing Cupholders  
When installing a cupholder, insert it  
firmly into the installation hole and make  
sure that it is secured in place.  
Caution!  
Do not place plastic bottles without  
caps in the cup holders. Otherwise, the  
contents may spill while the vehicle is  
being driven.  
Do not place excessive weight on the  
cup holders such as by resting your hands  
or elbows on them. Otherwise, the cup  
holders could be damaged.  
06040500-L25-002  
Correct Cupholder Placement  
If a passenger is present, install the front  
cup holder to the rear console. Otherwise,  
a knee might hit it and cause the contents  
to spill.  
The rear cupholder is designed for use  
on the rear console and cannot be  
installed to the front side.  
Removing Cup Holders  
Use both hands when removing the  
cup holder.  
06040500-J12AEC2-001  
Installing Cupholders  
06040500-L26-001  
The front cupholder can be removed  
and installed to the rear console.  
Incorrect Cupholder Placement  
06040500-J12AEC1-001  
Removing Cupholders  
73